Related Manuals for FORM & REFINE Trefoil
Summary of Contents for FORM & REFINE Trefoil
- Page 1 Trefoil Folding Wall Table Assembly guide Components Place the components on a blanket to avoid scratches on the floor and on the product.
- Page 2 Step 1 Position the bracket against the wall where the table will be mounted. Measure the desired height of the tabletop from the floor and use a pencil to mark the wall through the holes in the bracket. Ensure the bracket is level by using a spirit level.
- Page 3 Step 2 Move the bracket from the wall. Use a power drill to pre-drill the four holes at the marked points on the wall. Insert wall plugs (C) into the holes. Step 3 Attach the bracket to the wall using four screws (B) and a power drill.
- Page 4 Step 4 With the assistance of two people, lift the table and align it with the bracket. Push the table into position on the bracket, then use a pencil to mark the wall through the lowest hole in the bracket attached to the table.
- Page 5 Step 5 Move the table away from the wall-mounted bracket. Use a power drill to pre-drill the hole at the marked point on the wall. Insert a wall plug (C) into the hole.
- Page 6 Step 6 With the help of two people, lift the table and position it against the bracket. Carefully push the table into position on the bracket, ensuring it is securely seated. Using a power drill and screw (B), fasten the table to the wall through the designated hole.
- Page 7 Step 7 Secure the table to the wall bracket using the three screws (A) and the allen key (D).
- Page 8 formandrefine.com...
Need help?
Do you have a question about the Trefoil and is the answer not in the manual?
Questions and answers