Lunix LX3 Manual page 14

POWER
BUTTON
POWER ON: Press the power
button for 2 seconds to turn on
the massager. Then, press the
program button to start the
massage.
POWER OFF:
default run time is 15 minutes, and
it automatically shuts off after the
massage session. To turn it off
manually, press the power button
for 2 seconds. The airbags will
slowly deflate once the device is
shut down.
You can start again if you want to
go for a second session.
PROGRAM
MODE
The massager starts in program
mode P1. It has 6 massage modes
to choose from (P1 to P6).
Each mode targets different areas
of your
preferred mode by pressing the
program button. Everyone may
feel a unique massage due to
different hand shapes.
14
The massager's
hand. Choose
The default intensity is level 3,
with 6 levels ranging from 1
(weakest)
Adjust the intensity by pressing
the button.
If your hands are sensitive, start
at level 1 and gradually increase
as your hand gets accustomed
to the massage. Use regularly
for a few days to experience
pain relief and full massage
benefits.
Combination between
Combination between
1st cycle Palm Massage
2nd cycle: Palm and
your
1st cycle Palm Massage
2nd cycle Wrist Massage
INTENSITY
BUTTON
to 6 (strongest).
Fingers, Palm and
Wrist Massage
Fingers, Palm and
Wrist Massage
Wrist Massage
Wrist massage
Palm Massage
P1
P2
P3
P4
P5
P6