Lunix LX3 Manual page 12

Operations
PLEASE WASH YOUR HANDS
EACH TIME BEFORE USING
THE HAND MASSAGER
The LX3 Hand Massager is a personal care product. It is not intended
to treat, diagnose, or cure any medical condition. Always consult with
a healthcare professional if you have concerns regarding your health.
FIRST STEP: CHARGING
Charge the hand massager before first use. It's crucial to only use the
USB cable and plug included in the package to charge the unit. This
ensures the safety and optimal performance of your hand massager.
Using a different plug or a charger with specifications higher than
5V/2A can affect performance and damage the unit.
The battery level indicator should blink green while charging, indicating
that the hand massager is receiving power. Once fully charged, it
should display four solid green lights, signaling that the hand massager
is ready for use.
IMPORTANT:
For maximum battery capacity and
optimal performance, charge the hand
massager for 7 hours before first use.
Please note that the device does not turn
on while charging and cannot be used
until fully unplugged for safety reasons.
If the green light is not flashing while
charging, refer to the troubleshooting
section on page 16 of this manual.
12