Related Manuals for Anzzi TW-FS103AL
Summary of Contents for Anzzi TW-FS103AL
- Page 1 ITEM: TW-FS103AL ANZZI ELECTRIC TOWEL WARMER INSTALLATION & OPERATION MANUAL V2.0 01/10/2024 https://register.anzzihome.com/register/ V 2.0-This version supersedes all previous versions as of 01/10/2024...
- Page 2 IMPORTANT: Warranty will not be recognized unless product is registered. We offer two options to register your product. https://register.anzzihome.com/register/ Register online at or Scan the QR code below. Registering online is fast, secure, and ensures we receive your information. Complete, cut out, and mail the registration card below. Returning this registration card will ensure your product's warranty and allow us to process any warranty claims.
- Page 3 INSTRUCTION Before using this product. Please read the following instructions carefully and keep this pamphlet for future reference. About the product: This product is designed for drying or warming towels and for indoor use only. It is manufactured according to ETL standard and used under the voltage of 120V AC.
-
Page 4: Specifications
SPECIFICATIONS NOTE: Please use the towel warmer under 120 Voltage only. Power supply specification: 120V AC / 60HZ ● Power output: 130W ● Max temperature limit: 140°F ( 60 °C ) ● Timer: 2 or 4 hour ● PRODUCT SIZE CHART 20.87 "... -
Page 5: Parts List
TOOLS 1.Pencil 2. Hammer 3. Tape Measure 4. Electric Drill 5. “+” screwdriver 6. Level 7. Gloves PARTS LIST This is 2 in 1 function towel warmer, can be both wall-mounted and floor-standing installation, choose below parts based on need. For wall-mounted installation For floor-standing installation PG.3... -
Page 6: Wall-Mounted Installation
INSTALLATION This is 2 in 1 function towel warmer, can be both wall-mounted and floor-standing installation, choose one based on need. 1. Wall-mounted Installation ( 1 / 2 ) STEP 1: Install Hang Wall Component [ 1 ] on the product with reference to the figure, measure the distance of each hole with a tape measure. - Page 7 1. Wall-mounted Installation ( 2 / 2 ) STEP 4 : Knock Screw Expansion Tube [ 3 ] into the drilled hole. STEP 5 : Use screwdriver fasten the product to the wall with Self-tapping Screw (4.8*35) [ 2 ] as shown. Install Deckboard [ 4 ] under the product as shown.
-
Page 8: Floor-Standing Installation
2. Floor-standing Installation STEP 1: Use screwdriver fasten Self-tapping Screw (3.8*12) [ 6 ] and Floor Stand [ 7 ] to the product as shown. STEP 2: As shown in the figure, Foot Pad Cover [ 5 ] is placed on both ends of Floor Stand [ 7 ], and the product is placed on a flat surface. -
Page 9: Cleaning And Maintenance
OPERATING INSTRUCTION Power button: Press to turn ON / OFF, when the ● product turn ON, will keep heating. and max temperature limit is 140°F ( 60 °C ). Timer indicator Power indicator: The indicator will turn red / off when the ●... - Page 10 CLEANING & MAINTENANCE Do not allow unsupervised children in the vicinity of the towel warmer; and warn children of hot ● surfaces. An adult must supervise when the device is used by or near children. Unplug the unit with a dry hand and ensure that the electrical circuit breaker is off the main panel ●...
-
Page 11: Troubleshooting
TROUBLESHOOTING SYMPTOM RECOMMENED ACTIONS Thermostat failure Power off for first step and restart.Please contact the after-sales service if the problem still cannot be sloved. Ask a professional to check the socket-related lines to troubleshoot. The electrical cord is plugged in and Please contact the after-sales service if the problem still cannot be tripped sloved. - Page 12 ®...
Need help?
Do you have a question about the TW-FS103AL and is the answer not in the manual?
Questions and answers