NAIM CD5 XS Manual page 9

C DS3
7 . 2 up per Transit s c r ew s
Two transit screws must be removed from beneath the
transport lid of the CDS3 before use and be replaced if
the player is to be carried
any distance, packed or
shipped. The transit screw
locations are illustrated in
the diagram below. CDS3
transit screws must not be
used with any other Naim
product.
The player must not be
inverted either during
or after transit screw
removal.
8 CD s3 C onne cti ons
8. 1 r ear P a nel
Comms RC5 input
interface
note: RCA phono and DIN output sockets should not be
connected simultaneously.
note: The RC5 Input is intended to accept external control
signals for multi-room applications. Contact your dealer or
Naim Audio directly for further information.
note: The optional RJ45 socket Comms Interface
can provide external control of the player in custom
installations. Contact your dealer or Naim Audio directly
for further information.
Power supply input
(XPS or CD 555PS)
DIN output
RCA
phono
output
left
DIn output
ch1
ch2
RCA
phono
output
right
CDs3
nc
nc
-ve
e7