Operating
Instructions
MIC MIXER
Thank you for buying this Pioneer product.
Please
read
through
these
operating
instructions
so you
will
know
how to operate your model properly. After you have fi-
nished reading the instructions, put them away in a safe place for
future reference.
In some countries or regions, the shape of the power plug and
power outlet may sometimes
differ from that shown
in the ex-
planatory
drawings.
However,
the method
of connecting
and
operating the unit is the same.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT
NOTICE
IFor U.S. and Canadian models}
The serial number for this equipment is located on the rear panel.
Please write this serial number on your enclosed warranty card
and keep it in a secure area. This is for your security.
[For Canadian models]
CAUTION:
TO
PREVENT
ELECTRIC
SHOCK
DO
NOT
USE
THIS
(POLARIZED)PLUG WITH AN EXTENSION CORD, RECEPTACLE
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY IN-
SERTED TO PREVENT BLADE EXPOSURE.
LINE VOLTAGE SELECTOR SWITCH
Only multi-voltage
models
are provided
with this
switch.
U.S.,
Canadian,
European,
U.K.,
and
Australian models are not provided with it.
Mains voltages in Saudi Arabia are 127V and 220V
only. Never use this model with 110V setting in
Saudi Arabia.
The line voltage selector switch is on the rear panel, Before the
model is shipped from the factory, this switch is set to the power
requirements
of each destination,
Check that it is set properly
before plugging the power
cord into the AC wall'socket.
If the
switch is not properly adjusted to the voltage, or if the place of
residence is changed to an area where the voltage requirements
differ, adjust the selector switch as follows:
1. Use a medium-size
screwdriver,
2. Insert the screwdriver into the groove on the voltage selector,
and adjust the tip of the arrow so that it points to the printed
voltage value for each area
(
VOLTS
Except for Singapore modei
For Singapore model
The Art of Entertainment
Need help?
Do you have a question about the MA-9 and is the answer not in the manual?
Questions and answers