Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Diamond Parete
Summary of Contents for Diamond Parete
- Page 1 02/2017 Mod: PGN-1/TR Production code: TMG20V...
-
Page 2: Manuale Di Istruzioni
MANUALE DI MANUTENZIONE Parete - Teca SERVICE MANUAL • MANUEL D’ENTRETIEN WARTUNGSHANDBUCH • MANUAL DE MANTENIMIENTO PARETE VINO MANUALE DI ISTRUZIONI • USER MANUAL • MANUEL D’INSTRUCTIONS • BEDIENUNGSANLEITUNG • MANUAL DE INSTRUCCIONES Vi ringraziamo per aver scelto questo prodotto e Vi raccomandiamo di leggere attentamente tutte le istruzioni riportate. -
Page 3: General Information
3. INSTALLATION If you have purchased the Parete Vino, please proceed with the installation as indicated in the “Installation instructions” delivered together with the unit. The Teca is a product for free installation therefore do not require special assembly operations. -
Page 4: Use And Maintenance
Once placed in the final position, leave the showcase turned off at least 4 hours, this reduces the possibility of malfunction of the refrigerating system due to transport and handling. • Insert the plug into the wall socket (see electrical system safety) • To start operating the appliance act on the main switch located under the display on the right side (TECA) or on the front lower side (PARETE) • Turn on the display by pressing the power button of the controller ( ) (see legend of key symbols) • Let the machine run empty for at least two hours before inserting bottles / food... -
Page 5: Operation
If you wish to perform an additional manual defrost, press and hold for at least three seconds the key in order to stop the cooling for fifteen minutes. After this stop the appliance will run again the normal operation with the previously programmed temperatures. POSSIBLE SETTINGS PARETE TECA +16 °C +16 °C +8 °C... -
Page 6: Condenser Temperature Alarm
TURNING THE LIGHTS ON The lights of the upper unit “B” light up together with the lower unit “A” by pressing the Key on controller of the “A” unit. If you want to keep off the top unit “B” while the “A” unit is on you must act manually on the switch (I-O) of the upper unit “B”, placed next to the controller. MINIMUM ADJUSTABLE TEMPERATURE The temperature controllers of all the showcases are blocked so that the user cannot set lower temperatures than those planned PARETE VINO +3 ° C (excluding P * VBR10 and CAR10-20 +12 ° C) TECA +4 °C (excluding TC10-20 +12 °C). It is not allowed to enter the hidden parameters and modify these values. The showcases are not designed and built to operate at low temperatures. Failure to comply with this provision will invalidate the warranty. CONDENSER TEMPERATURE ALARM... -
Page 7: Wiring Diagrams
ENGLISH 5.3 CENTRAL COOLING SYSTEM STANDARD OPTIONAL OPT-EAP ≥ 90 mm Rear air expulsion OPTIONAL OPT-PUR Unit set for remote compressor connection The cooling serpentine and the internal fans are located in the middle of the cabinet between the aluminium panels. inside air flow The compressor , the horizontal condensing unit with the fan with pressing blade... -
Page 8: Problem Solution Guide
File name PARETE1(EV) PARETE2(EV) Exploded view www.exposrl.com >> technical area >> Spare parts and exploded views TECA1(EV) TECA2(EV) PARETE-A (SE) Wiring diagram www.exposrl.com >> technical area >> electric wiring PARETE-B (SE) User instructions www.exposrl.com >> technical area >> user instructions PARETE-TECA (MI)
Need help?
Do you have a question about the Parete and is the answer not in the manual?
Questions and answers