Fisher ARMOR 8000 Series Instruction Manual

Instruction Manual
D104668X012
March 2025
Fisher™ ARMOR 8000 Series
Natural Gas Monitoring System

Table of Contents

Safety Messages ...................................................................1
Introduction ............................................................................2
Specification ..........................................................................3
Hardware Installation .............................................................4
Electrical Installation ..............................................................7
Installation in Hazardous Area (Power Supply) ........................7
Installation in Hazardous Area (Solar Controller) ......................8
Installation in Safe Area .........................................................8
Configuration .......................................................................16
Maintenance .......................................................................23
Troubleshooting ...................................................................23
Parts Ordering .....................................................................24
Parts List..............................................................................24
▲
Failure to follow these instructions or to
properly install and maintain this equipment
could result in an explosion and/or fire
causing property damage and personal injury
or death.
Fisher™ equipment must be installed,
operated and maintained in accordance
with federal, state and local codes, rules
and regulations and Emerson Process
Management Regulator Technologies Inc.
(Emerson) instructions.
Only personnel trained in the proper
procedures, codes, standards and
regulations, for the applicable industries
should install and service this equipment.
WARNING
ARMOR 8000 Series
Figure 1. ARMOR 8000 Series

Safety Messages

▲
Read this manual before working with the
product. For personal and system safety and
for optimum product performance, ensure
you thoroughly understand the contents
before installing, using or maintaining
this product.
EXPLOSIONS
Explosions could result in death or
serious injury.
In an explosion proof/flame proof installation,
do not remove the device cover when power
is applied to the ARMOR 8000 Series.
WARNING