Fender FM 412SL GUITAR SPEAKER ENCLOSURE Product Specifications

T H E F E N D E R ® F M 4 1 2 L O U D S P E A K E R E N C L O S U R E
Your new FM 412 loudspeaker enclosure features four 12" (30.5cm)
speakers and is capable of handling 100 Watts. The FM 412 speaker
was designed to complement the Fender
be used with any 4–ohm, 100–watt instrument amplifier with a standard
1/4" speaker output jack. Read these instructions and your amplifier
manual before making connections.
Connecting the Fender
Connect the FM 412 to the speaker output jack on your FM 100H
amplifier with its included speaker cable or any unshielded, quality
speaker cable.
When using the FM 412 with other amplifiers, check the amplifier output
specifications for compatibility. Always make certain that the amplifier
has a 4–ohm output impedance capability and the power output does
not exceed 100 watts.
MONO
4Ω
A PRODUCT OF:
FENDER MUSICAL
INSTRUMENTS CORP.,
CORONA, CA U.S.A.
MADE IN CHINA
POWER RATING
100W
MODEL
IS A REGISTERED TRADEMARK OF FENDER MUSICAL INSTRUMENTS CORP.
WARNING: TYPE: PR 656
FENDER LOUDSPEAKER SYSTEMS
SERIAL NUMBER
ARE CAPABLE OF PRODUCING
VERY HIGH SOUND PRESSURE
LEVELS WHICH MAY CAUSE
TEMPORARY OR PERMANENT
HEARING DAMAGE. USE CARE
WHEN SETTING AND ADJUSTING
VOLUME LEVELS DURING USE.
P/N 069196 REV A
® FM 100H amplifier, but it can
® FM 412 Loudspeaker
SPECIFICATIONS
PART NUMBER 2317800000
DRIVERS Four, 12" (30.5 cm), Special Design speakers
CABINET 18 mm plywood
SENSITIVITY 99 dB, 1 Watt - 1 Meter
POWER HANDLING 100 Watts
IMPEDANCE 4
CONNECTIONS 1/4" Input Jack
DIMENSIONS
Height: 30.0 in (76.2 cm)
Width: 29.5 in (74.9 cm)
Depth: 14.3 in (36.3 cm)
WEIGHT 82.0 lb (36.9 kg)
Product specifications are subject to change without notice.
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORPORATION
CORONA, CALIFORNIA USA
Fender ® is a registered trademark of FMIC.
Other trademarks are property of their respective owners.
© 2005 FMIC. All rights reserved.