TECHNICAL DATA ............................7 ..........................7 EVICE IDENTIFICATION MOUNTING .............................. 8 ELECTRICAL COMMISSIONING ........................9 ............................10 ONNECTIONS ..........................10 ONNECTION SCHEME INDICATION AND OPERATING ELEMENTS ....................11 MAINTENANCE AND SERVICE ......................... 12 HE 5410 Operating instructions #341494 | Version 2.0...
Legal provisions Manufacturer AXXERON HESCH electronics GmbH, Boschstraße 8, 31535 NEUSTADT, GERMANY Intended use The differential pressure transmitter HE 5410 is suitable for a 10…36 V DC connection. The device can be operated within the operating and environmental conditions approved in these operating instructions without impairing its safety.
Indicates a potentially hazardous medium risk situation, which, if not avoided, could result in death or serious injury. CAUTION! Indicates a hazardous low risk situation, which, if not avoided, could result in minor or moderate injury. HE 5410 Operating instructions #341494 | Version 2.0...
Secure the device against being unintentionally switched If the device is linked to other devices and/or equipment, consider the impacts and take appropriate precautions before switching it off. Abbreviation for Deutsche Gesetzliche Unfallversicherung (German Social Accident Insurance) HE 5410 Operating instructions #341494 | Version 2.0...
KWF according to DIN 40040 ( ≤ 75 % rel. humidity, no Climatic application class: condensation) -20 °C…+55 °C Ambient temperature for operation: Subject to technical changes! Device identification Name plate exemplary with 0…25 mbar HE 5410 Operating instructions #341494 | Version 2.0...
Do not connect any other loads to the terminals. This may distort the measuring current (see also Figure 3)! Scope of delivery HE 5410 differential pressure transmitter Operating instructions Note! Check the delivery upon receipt for completeness and visible defects. In the event of a complaint, contact your responsible representative at AXXERON HESCH electronics GmbH immediately.
The temperature limitations specified for the use of the device must be complied with before and during operation. Note! Do not connect any other loads to the terminals. This may distort the measuring current (see also Figure 3)! HE 5410 Operating instructions #341494 | Version 2.0...
No other loads may be connected to The higher pressure (+) is applied the terminals in order not to distort to the front connection! the measuring current! Connections (pneumatical and electrical) Connection scheme Mains Measuring input Connection scheme HE 5410 Operating instructions #341494 | Version 2.0...
In case the zero point must be set for some reason, please observe the 30 minute warmup time of the device and contact the service of AXXERON HESCH electronics GmbH, if necessary (see chapter 7 Maintenance and Service).
Dispatch metals and plastics for recycling. Electrical and electronic components must be collected separately and disposed of properly. Dispose of assembled printed circuit boards properly. Service AXXERON HESCH electronics GmbH Boschstraße 8 31535 NEUSTADT GERMANY Phone: +49 5032 9535-0 Internet: www.hesch-automation.com Email: info@hesch.de HE 5410 Operating instructions #341494 | Version 2.0...
Need help?
Do you have a question about the HE 5410 and is the answer not in the manual?
Questions and answers