Download Print this page

Razor RAVEN Battery Replacement

Download this manual

Required Tools: (Not included)

• T25 driver

• Phillips screwdriver

WARNING

CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect

charger before conducting any assembly or maintenance procedures. Failure to follow these

steps in the correct order may cause irreparable damage.

Step 1

Using a T25 driver, remove the six (6) screws from the

deck and pull the deck away from the unit.

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.

BATTERY REPLACEMENT

PART NUMBER: W13112105003

Step 2

Locate and disconnect the charger port from the

battery and battery connector from the controller.

RAVEN

Need help?

Do you have a question about the RAVEN and is the answer not in the manual?

Page 1 Locate and disconnect the charger port from the deck and pull the deck away from the unit. battery and battery connector from the controller. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Page 2 ATTENTION: Charge battery 5 hours before using. the battery from the unit. Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time. 250414...