Advantech FWA-4134 User Manual

Network security platform

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

User Manual

Revision 0.1

Date 2024/03/06

FWA-4134

Network Security Platform

2024

Table of Contents

Need help?

Do you have a question about the FWA-4134 and is the answer not in the manual?

Questions and answers

Summary of Contents for Advantech FWA-4134

Page 2: Table Of Contents
3.4.5 Power Supply Unit(s) ................................41 Available Accessories and Related Products .......................... 42 CONFIGURATION AND SERVICE ................43 Jumper Settings ....................................43 BIOS Setup Menu ....................................43 4.2.1 BIOS Defaults .................................... 43 Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 2...
Page 3 GPIO2 Pin header (GPIO2) ............................... 57 5.1.2.3 SW Button Signal Pin header (SW_BTN1) ........................ 58 Serial Console Cable Pin Configuration ............................ 59 BIOS POST Code ....................................59 Power Supply Specification ................................59 Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 3...
Page 4 Table 5.1-5 Pin Definition of SW Button Signal Pin header ................59 Table 5.2-1 Serial Console Cable Pin Assignment ....................59 Table 5.4-1 350W AC Power Supply Specification ....................60 Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 4...
Page 5 Figure 5.1-3 GPIO1 Pin header ............................. 57 Figure 5.1-4 GPIO2 Pin header ............................. 58 Figure 5.1-5 SW Button Signal Pin header ....................... 58 Figure 5.2-1 Serial Console Cable Overview......................59 Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 5...
Page 6: How To Use This Manual
Copyright and trademarks The documentation and the software included with this product are copyrighted by Advantech Co., Ltd. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd.
Page 7: Conventions Used In This Manual (Warnings & Cautions)
ATTENTION! Des précautions sont incluses pour vous aider à éviter d'endommager le matériel ou de perdre des données. Note! Notes provide additional information. Remarque! Les notes fournissent des informations supplémentaires. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 7...
Page 8: Product Warranty
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
Page 9: Product Configuration That This Manual Covers
Product Configuration That This Manual Covers Figure 0-1 Product Configuration Revision History Table 0-1 Revision List Date Revision Modifications 2024.03.06 Initial version Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 9...
Page 10: Related Manuals & Quick Start Image
BIOS Setup User Manual https://www.advantech.com.cn/zh-cn/support/details/manual?id=1-2M9OZJ5 Advantech FWA-4134 Linux Platform Software Guide https://www.advantech.com.cn/zh-cn/support/details/manual?id=1-2M9TJJH Please contact your Advantech representative if you reference to the following document(s) and image(s). Advantech QuickStart Linux Image Getting Started Guide Quick Start Linux Image Copyright 2024 Advantech Co.
Page 11: Getting Started
19. CAUTION: Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 11...
Page 12 27. If the power adapter doesn't ship with the unit, the user manual shall have the description as below or equivalent: "This product is intended to be supplied by a Listed Power Adapter or DC power source, Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 12...
Page 13 -36 ~ -72Vdc, 12-6A, Tma 40 degree C and and altitude of operation is minimum 5000 meter, if need further assistance, please contact Advantech for further information." - element 1a: , IEC 60417-6042 (2010-11); and , IEC 60417-6172 (2012-09) - element 2: “Caution”...
Page 14 équivalent recommandé par le fabricant, jetez les piles usagées conformément aux instructions du fabricant. 17. Le niveau de pression acoustique à la position de l'opérateur, conformément à la norme CEI 704-1: 1982, ne dépasse pas 70 dB (A). Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 14...
Page 15: Declaration Of Conformity
18. ZONE D'ACCES RESTREINTE: L'équipement ne doit être installé que dans une zone d'accès restreint. 19. AVERTISSEMENT: Cet ensemble d'instructions est donné conformément à la CEI 704-1. Advantech décline toute responsabilité quant à l'exactitude des déclarations contenues dans ce document.
Page 16: Ce Mark
électromagnétique 2014/30 / UE, Directive sur la sécurité 2014/35 / UE. Note! The equipment is operated and maintained only by professionals Remarque!L'équipement est exploité et entretenu uniquement par des professionnels Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 16...
Page 17: Unpacking
2.3 Unpacking The FWA-4134 is packaged inside double carton, collectively referred to as the “box” in the remainder of this document. When opening the box, you will find the FWA-4134 embedded in protective foam and the accessory box embedded to the foam. Remove the accessory box first and then pull out the top foam. Now, lift the system to place on a proper surface before taking off the plastic sleeve on the unit.
Page 18: Installation And Configuration
If your PC lacks an RS232 port, consider acquiring a USB-to-RS232 cable (Figure 2.4-2). Do note that for the two RS232 ends of the cables, one should be male and the other female. The FWA-4134 also supports operation via a serial console port, suitable for situations without a connected monitor.
Page 19 If you intend to use PuTTY on a PC running Windows OS. The following of this section describes how to configure PuTTY on a Windows platform for connection with the FWA-4134 serial console as a reference. Otherwise, feel free to skip these steps if you have another preferred method. Other terminal programs may be used in a similar way as well.
Page 20 The default baud rate for the COM port is 115200 with no parity and no flow control. If you have previously modified these settings, please use the baud rate you configured in the BIOS, please reference “FWA-4134 CFL BIOS Specification V1.0”. It's worth noting that the BIOS and OS might have different serial console configurations.
Page 21 Figure 2.4-6 PuTTY Keyboard Settings Click the “Open” button and a PuTTY terminal screen will be displayed. If you wish to retain the configuration for future use, click the “Save” button. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 21...
Page 22 In case you would extend the time, the BIOS displays the POST screen and waits for a key press to enter the setup menu, you can do so via the BIOS setup menu. Please refer to Section 4.2 for details. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 22...
Page 23: Installation Via Monitor, Keyboard And Mouse
Rackmount Kit Installation Slide rails installation instruction: Align the holes on the slide rails with the holes on the sides of FWA-4134. Insert screws through the holes in the slide rails and into the corresponding holes on appliance. Use a screwdriver or power drill with the appropriate bit to tighten the screws.
Page 24 Push the safety lock forward to secure the bracket. It is important to check if the safety lock is in unlocked position before mounting the brackets. *Release safety lock before mounting *Push the safety lock forward to secure Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 24...
Page 25 While pushing the chassis back into the rack, you need to release the slide from locking position by pressing the trigger down. * Ball retainer is in fully open position. *Press trigger down to release the slides from locking Figure 2.4-10 Slide Rails Installation Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 25...
Page 26: Powering On
FWA-4134 PSU. Also, verify that the primary circuit and all power distribution are not overloaded. Inrush current and steady state power specifications for the FWA-4134 can be found at the label at the side of the unit. Connect the power cords to the Power supply units (refer to section 3.4.5...
Page 27: Temperature Requirement
 Non-operating Temperature -40 ~ 60° C (-40 ~ 140° F)  Relative humidity 95% @ 40° C (non-condensing)  Storage temperature -40 ~ 60° C (-40 ~ 140° F) Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 27...
Page 28: Product Specification
GbE, 10GbE, 40GbE and 100GbE modules, with or without advanced LAN bypass, for different deployment scenarios FWA-4134 also integrates two 1GbE RJ45 ports at the front panel, One RJ45 console port and two USB2.0 ports can help you OS installation. Storage options include 1 mSATA and two 3.5” SATA device.
Page 30: System Memory
3.2.2 System Memory FWA-4134 supports 2 Channels per CPU 4 DIMM slots, Up to 128GB / *Follow latest Intel DDR4 Memory POR DDR4 Unbuffered ECC UDIMM 3200. For optimal memory performance, follow the table below when populating memory Four DIMM Slots...
Page 31: Memory Installation
5. Put your thumbs near the right and left end of the DIMM and press down the DIMM evenly until the white latches fully close with a click. 6. In case you want to install another DIMM, repeat steps 1 to 5 accordingly Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 31...
Page 32: Cpu Installation
3.2.4 CPU Installation FWA-4134 design in LGA1700 CPU slot which used to support Intel Alder/Raptor Lakes S. Please refer below figure to install CPU and CPU heatsink. Figure 3.2-8 CPU Installation –load plate using finger tab, Press and open the TAB on the foot seat...
Page 33: Storage: 3.5' Hdd Installation
3.2.5.1 Remove four screws as below picture and remove HDD tray (please keep the screws for later installation). 3.2.5.2 Take 8 screws from accessory box and install 3.5’ HDD to HDD tray as below picture, be careful about the HDD direction Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 33...
Page 34: (2.5')Hdd Installion (By Sku Option)
This HDD tray could support 3.5’ HDD or 2.5’ HDD, 3.2.6.1~3.2.6.3 is for 3.5’ HDD installation, 3.2.6.4~3.2.6.5 is for 2.5’ HDD installation. 3.2.6.1 Remove four screws as below picture and remove HDD tray (please keep the screws for later installation). Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 34...
Page 35 3.2.6.4 If you use 2.5’ HDD, take 4 HDD rubbers from accessory box and install them to HDD tray. 3.2.6.5 Take four screws from accessory box and install 2.5’HDD into HDD tray Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 35...
Page 36: Msata Installation
3.2.7 MSATA installation 3.2.7.1 FWA-4134 support both half size mSATA card and full size mSATA card; If you use half-size mSATA, please install a post first, then fix the card with screw. 3.2.7.2 If you use full size mSATA, install a screw directly.
Page 37: Display Graphic Card Installation
3.2.8.1 Remove the display port material in back cover 3.2.8.2 Take the display board and install cable as shown below. 3.2.8.3 Take the cable install with DP1 Connector as shown below. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 37...
Page 38: Product Versions/Ordering Information
3.2.8.4 Fix the cable as below picture 3.3 Product Versions/Ordering Information The FWA-4134 is available in the following standard configurations. Contact your Advantech representative for availability of other configuration options. Table 3.3-1 Available Product Version Model Name Configurations Peripherals Power Supply Unit...
Page 40: Processor(S)
3.4.1 Processor(s) The FWA-4134 supports single Intel® 12th/13® Gen Core™ i9/i7/i5/i3 processors. The table below gives an overview of the processor SKUs for communication infrastructure which can be supported on the FWA-4134: Table 3.4-2 Processors Supported List 3.4.2 PCIe Expansion...
Page 41: Bios
3.4.4 BIOS FWA-4134 BIOS is based on AMI’s APTIO BIOS and compliant to the UEFI, SMBIOS and ACPI specifications. The BIOS performs probing, initialization and configuration of the FWA-4134 and initializes the OS boot process at the end of POST (Power-On-Self-Test).
Page 42: Available Accessories And Related Products
3.5 Available Accessories and Related Products The following accessories are available for ordering. Please contact your Advantech representative for a list of available and supported peripherals such as memory modules and 2.5”/M.2 SSDs. Table 3.5-1 Accessories Order Number Description 1700009652...
Page 43: Configuration And Service
4.2.1 BIOS Defaults The BIOS comes with a set of configuration parameters when shipped by Advantech referred to as “Optimized Defaults” or “factory defaults”. The user can change BIOS settings via the setup menu either temporarily or permanently by saving the changes as “User defaults”.
Page 44: Bios Setup Menu
This section describes the FWA-4134’s UEFI BIOS based on AMI’s APTIO BIOS. Users can modify BIOS settings and control the special features of the FWA-4134 using the BIOS setup menu. Please note that Advantech supports shipping the FWA-4134 with custom BIOS defaults to simplify the deployment and integration for our customers.
Page 45: Main Setup Menu
Figure 4.2-2 BIOS Setup Screen Organization 4.2.3 Main Setup Menu Please reference “FWA-4134 BIOS Setup User Manual” https://www.advantech.com.cn/zh-cn/support/details/manual?id=1-2M9OZJ5 4.2.4 Setup submenu: Advanced Options Summary: This is [Advanced] page of BIOS Setup. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 45...
Page 47: Power&Performance
This is information table of CPU Power Management Control Intel(R) Enabled Optimal Default, Failsafe Default SpeedStep(tm) Disabled Allows more than two frequency ranges to be supported. C states Enabled Disabled Optimal Default, Failsafe Default Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 47...
Page 48: Sw Button Configuration
Table 4.2-1 Platform Setup: SW Button Configuration Menu Items Sleep Button / Set the SW Button as Sleep Button or Driver SW Button Mode Driver / mode or disable it. Disabled Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 48...
Page 49: Trusted Computing
This is configuration table of TPM security device. Security Device Disable Support Enable Optimal Default, Failsafe Default Enables or Disables BIOS support for security device. 4.2.4.5 ACPI Settings Options Summary: Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 49...
Page 50: Setup Menu: Chipset
Optimal Default, Failsafe Default Enable this function to cut off the power of peripherals in sleep state. 4.2.5 Setup menu: Chipset Options Summary: This is [Chipset] page of BIOS Setup. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 50...
Page 51: System Agent (Sa) Configuration
Above 4GB MMIO BIOS Enabled Optimal Default, Failsafe Default assignment Disabled Enable/Disable above 4GB Memory Mapped IO BIOS assignment. This is enabled automatically when Aperture Size is set to 2048MB. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 51...
Page 52: Sata Configuration
Disabled Enabled Optimal Default, Failsafe Default Enable or disable SATA Device 4.2.6 Setup menu: Security Allows users to configure the system a password Please reference “FWA-4134 CFL BIOS Specification V1.0”. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 52...
Page 53: Setup Submenu: Boot
Setup submenu: Boot Users can configure the system boot priority settings via the boot page. Please reference “Common BIOS User Manual”. (Note: FWA-4134 supports UEFI mode only; there is no legacy mode. CSM is not supported in FWA-4134 series) 4.2.8 Setup submenu: Save&Exit...
Page 54: Appendix
MGMT1 Mangement board IO connector NMC1,NMC2,NMC3,NMC4 4x NMC connector Layer 2 NMC PCIe signals SLIMSAS1,SLIMSAS2 TPM module connector SPI_TPM1 MSATA connector (mux option with SATA3) MSATA1 CPU FAN connecter CPUFAN1 Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 54...
Page 55 FLASH SECURITY OVERRIDE JME1 JCMOS1 Clear CMOS pin header PSON1 FORCE PS_ON MUTE_BTN1 PSU Alarm disable button PWR_BTN1 System PWR button RST_BTN1 System Reset button LCM_PWR1 LCM Module Power CONN Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 55...
Page 56: Connectors On Namb-4134 Management Board
SW_BTN1 Software Define Button SW_LED1 Software Define LED COM2 UART2 pin header COM3 UART3 pin header GPIO1 I2C expansion GPIO 16BIT pin header GPIO2 I2C expansion GPIO 16BIT pin header Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 56...
Page 57: Gpio1 Pin Header (Gpio1)
3.3V or 5V power (Select by JVGPIO1) Ground 5.1.2.2 GPIO2 Pin header (GPIO2) There are provide 8 bits of General Purpose parallel Input/Output (GPIO) expansion for I2C/SMBus application. The following table is the pin defintion. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 57...
Page 58: Sw Button Signal Pin Header (Sw_Btn1)
HDD LED Power ALM_LED# RSV for SERIAL3_DTR 3.3V STBY GPIOHDR_P17 Ground PWR_LED_PWR Power for LED 3.3V Ground 5.1.2.3 SW Button Signal Pin header (SW_BTN1) Figure 5.1-5 SW Button Signal Pin header Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 58...
Page 59: Serial Console Cable Pin Configuration
Please refer to the BIOS POST Codes Table in the document linked below: https://www.advantech.com.cn/zh-cn/support/details/manual?id=1-2M9OZJ5 5.4 Power Supply Specification The FWA-4134 is available with redundant power supply solution. The specifications for the available power supply on the standard product SKU are listed below. Please consult your Advantech representative if you have further questions.
Page 60 Vibration: PSD=3.13grms, 20 minutes/axis Operating, 0.01g2/Hz at 5Hz slopping to 0.02g2/Hz at 20Hz, and maintaining 0.02g2/Hz Force Direction X, Y, Z from 20Hz ~ 500H Regulatory/ Safety: Certifications Electric strength Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 60...
Page 61 EMC: A. Meets GB/T9254.1 class A standards. B. Meet the GB17625.1 standard. C. Lightning protection design, according to GB/T17626.5, 1000V between L-N, 2000V between L and N-GND. Copyright 2024 Advantech Co. Ltd. All rights reserved. Page 61...

This manual is also suitable for:

Fwa-4134-00a1r Fwa-4134-01a1r

Advantech FWA-4134 User Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Advantech FWA-4134

Summary of Contents for Advantech FWA-4134

This manual is also suitable for:

Table of Contents