Related Manuals for ProLine Range Hoods PLSI 570
Summary of Contents for ProLine Range Hoods PLSI 570
- Page 1 PLSI 570 Island Range Hood Installation Guide IMPORTANT: Read and save these instructions. NOTICE: Installer: Leave this guide with the homeowner Homeowner: Keep this guide for future reference...
- Page 2 Proline PLSI 570 Island Hood Installation Guide How to Install a Wall-Mounted Range STEPS 1 & 2 Hood Tools You'll Need: • Level • Sheetrock saw (for cutting duct hole, if • Pencil needed) • Tape measure • Screwdrivers • Drill •...
- Page 3 Step 4: Install the Range Hood Under STEP 5 the Ceiling 1. With assistance, lift the range hood and align it with the pre-installed mounting bracket or drilled holes. 2. Secure the hood to the ceiling using the provided screws and anchors. Ensure it is level and stable.
- Page 4 Proline PLSI 570 Island Hood Installation Guide After the Installation – Final Steps Now you just need to do a few quick things to ensure that your installation went smoothly. Tighten screws that hang the range hood. • Next, for added support, you can tighten your screws. If you still want more support, you can add a grabber or self-tapping screw through your mounting bracket or range hood into your stud.
-
Page 5: Safety Information
• All Proline range hoods are ETL certified. They meet all industry standards and regulations to ensure your safety. • Use the high setting on your range hood to vent heavy smoke or heat in case of emergency. Otherwise, use the lower settings to prolong the life of your hood. - Page 6 Proline PLSI 570 Island Hood Installation Guide In the event of a grease fire: • Smother the flames with a large lid, pan, or baking sheet. If the fire is small, smother it with baking soda or salt. For larger fires, use a fire extinguisher.
- Page 8 Proline PLSI 570 Island Hood Installation Guide 4375 W 1980 S, Salt Lake City, UT 84104 Call (877) 901-5530 support@prolinerangehoods.com www.prolinerangehoods.com Our Support team hours are: Mon-Fri 8:30 am – 5:00 pm MST...
Need help?
Do you have a question about the PLSI 570 and is the answer not in the manual?
Questions and answers