Ableton Move Manual

Intended Use

Ableton Move is a standalone instrument for music creation that gives you hands-on control over melody and harmony, beats, sounds, and song structure.
Ableton Move is intended for indoor use only.
The device should be used on a flat surface or stand and should not be tilted more than 45 degrees during use.
When you see an exclamation mark in this booklet, this means we're covering a topic that's particularly important for your health or safety. Please read these sections carefully.

Health and safety

Here are a few things to keep in mind to avoid damaging your Ableton Move or injuring yourself while using it.

Protect your hearing
Your Ableton Move can be connected to headphones or speakers. Prolonged exposure to high volumes from either can cause hearing damage. Keep an eye on your volume levels and remember that both background noise and continued exposure to high volumes can make sounds seem quieter than they actually are.

Take regular breaks
Using your Ableton Move for extended periods of time could lead to discomfort in your neck, shoulders, arms, elbows, wrists or hands. Remember to maintain good posture when playing, take breaks, and avoid extended repetitive motion.

Photosensitive epilepsy
If you suffer from epilepsy or epileptic seizures, consult a physician before use. Some patterns may cause epileptic seizures even in people without pre-existing conditions.

Keep your Ableton Move cool
Your Ableton Move and its power supply might get warm during use. Remember to keep the instrument and its power supply ventilated. Don't use it in bed, on a pillow, or under bedding. If your Ableton Move gets uncomfortably warm when being used on your lap, move it to a stable work surface to cool it down.

Radio frequency exposure
Your Ableton Move uses radio signals to connect to wireless networks. It's been tested and meets applicable limits for radio frequency (RF) exposure.
Your Ableton Move supports both the 2.4 GHz and 5 GHz Wi-Fi bands. We recommend only using the 5 GHz Wi-Fi band if you're located in the EU, UK, USA, Canada, Japan, South Korea, Australia or New Zealand.
For the best audio quality, avoid using your Ableton Move in a high RF-radiated environment. Radio frequency interference could make your Ableton Move malfunction, but it'll return to normal once any interference is removed.

Battery safety
Your Ableton Move contains a lithium battery.

Batteries can constitute a burn hazard, fire hazard or explosion hazard. Handle them with extreme caution. Don't open, crush, or heat any batteries above 100°Celcius (212°Fahrenheit).
Only use the batteries that come with your Ableton Move. Remember to always switch your instrument off before accessing its battery, and never short-circuit any battery.

AC power supply safety
It is recommended to only connect your Ableton Move to the power supply ABL05300 that comes with your instrument. Use of any other power supply is at your sole risk.
The power supply that comes with your Ableton Move is only intended for use with this instrument and isn't recommended or approved for any other device.
When moving your Ableton Move or not using it, we recommend securing its power cable so that it doesn't hang loosely from the device (by wrapping it with a cable, for example).
Always double-check that the power cable of your Ableton Move isn't damaged before using it. In case of damage, bring your Ableton Move and its power cable to a qualified repair person. You can find more information about this in the next section (Repairs and care).
If the power cable that comes with your Ableton Move can't be plugged in because your outlet is not functional or broken, get in touch with an electrician to replace or repair it.
Make sure the power cable of your Ableton Move is protected from being stepped on or pinched, especially where it connects to the instrument or to an outlet.
Unplug your Ableton Move in case of lightning storms or if you won't be using it for a long period of time.

(for USA & Canada models only): TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

Moisture and temperature
Don't set your Ableton Move up near any heat sources. Extreme sunlight, radiators, heat registers, stoves, and even amplifiers that produce heat can damage your instrument. Use your Ableton Move in a location where the ambient temperature is between 10° and 35°Celsius (50 – 95°Fahrenheit). If your Ableton Move has been exposed to cold temperatures, wait for it to warm to room temperature before using it again.

To reduce the risk of fire or electrical shock, don't expose this instrument to rain or moisture. Electrical equipment should never be kept or stored in damp environments.

Usage
Handle your Ableton Move with care. It's made with precious materials and has sensitive electronic components inside.
Always turn off your Ableton Move before storing or transporting it. Only use attachments and accessories provided or approved by Ableton.
Don't drop or throw your instrument.

Repairs and care

Your Ableton Move supports certain types of repairs. To avoid any issues, please only repair your instrument using parts manufactured or sold by Ableton. You can find helpful information and instructions for doing this here: www.ableton.com/help.

Repairs
You can buy accessories and replacement parts for your Ableton Move. Learn more at www.ableton.com/parts
We recommend having a qualified technician carry out repairs for you. This includes the following cases: if you've spilled liquid onto the instrument; if anything has fallen inside of it; if it's been exposed to rain or moisture; if it doesn't operate normally; if it's been dropped.
To ask about your options for getting your Ableton Move repaired, please get in touch with Ableton Support at www.ableton.com/help

Only replace your instrument's critical components with factory parts provided by Ableton or recommended equivalents.

Care
We recommend keeping your Ableton Move clean and dust-free to help extend its lifespan.
Turn your instrument off and unplug any cables before cleaning it. Use only a dry cloth to clean it.

If you have any questions about repairs, returns or your warranty, get in touch with Ableton Support: www.ableton.com/help

Manufacturer
Ableton AG
Schönhauser Allee 6-7, 10119 Berlin, Germany
Telephone number: +49 30 568 39440