Advertisement
Quick Links
Assembly Instructions for the Revv 1 Center Storage Cage
Materials Needed
● Ride1Up Hex Keys
● Pre-Built Revv Storage Cage
● Flat Screws
Step 1: Remove Storage Cage from the Box
1. Remove the storage case and lay it on a flat surface.
2. Remove the four preinstalled hex screws on top of the controller box.
3. Save the existing hardware for installation or use provided hardware.
Step 2: Secure Storage Cage
1. Align the storage case and ensure pre-drilled holes are lined up with the Controller box.
2. Using supplied flat screws, thread into the controller box, tighten until flush with the
storage case.
Step 3: Setting a unique code for the Center Storage Cage combination lock
1. Note: Pre-set code is 000.
2. Push the small silver code setting pin on the side of the circular dial in with a small
instrument or screwdriver.
3. Set your desired code
4. Remove the screwdriver, allowing the setting pin to return to place.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Ride1up Center Storage Cage
Summary of Contents for Ride1up Center Storage Cage
- Page 1 2. Using supplied flat screws, thread into the controller box, tighten until flush with the storage case. Step 3: Setting a unique code for the Center Storage Cage combination lock 1. Note: Pre-set code is 000. 2. Push the small silver code setting pin on the side of the circular dial in with a small instrument or screwdriver.
- Page 2 Final Steps & Important Notes ● Ensure the cage is secure and tight by gently moving the cage. ● Periodically check the flat screws to ensure they are secure to the controller box. For any questions or additional assistance, please contact customer support.
Need help?
Do you have a question about the Center Storage Cage and is the answer not in the manual?
Questions and answers