INTRODUCTION • The KELDAN RC2 remote control is based on ultrasonic technology. • It has two brightness channels. Each channel can address an infinite number of lights simultaneously. • A light can be paired with any of the two channels with a pairing mode.
INSTRUCTIONS 1� PAIRING A pairing is needed to pair a light with the RC2 remote control. Each remote controller has a unique identifier which is sent along with each command. This allows to use multiple remote controllers at the same location without interference. The remote control does not work in air. The pairing procedure needs to be performed in water.
1. Set the XR compact light to remote mode 2. Move the brightness knob on the RC2 remote control to the desired level 3. The 9 brightness levels on the RC2 remote control correspond to the nine levels which can be set manually on the light 4.
RC2 remote control carries a two-year warranty after purchase (proof of purchase date required). The warranty is limited to material defects which occur when correctly handling the product. The warranty does not cover the battery. KELDAN® warranty coverage is void for defects as a result of improper use. RC2 Wireless Remote Control Operating Instructions...
7� LIABILITY KELDAN® declines all responsibility for damages arising from any improper use of the RC2 remote control or as incurred by a third person. TECHNICAL DATA Article Nr� 1998 Battery CR2032, 3V Dimensions 84x36x46mm Weight (in air) 150gr Weight (in water)
Page 7
KELDAN GmbH Tel: ++41 32 333 16 28 www.keldanlights.com Industriestrasse 37a contactus@keldanlights.com 2555 Brügg Switzerland KELDAN is a registered trademark of KELDAN GmbH. ® Subject to change without notice, December 2024. Lighting with RC2 remote control Photo: Vanessa Cara-Kerr...
Need help?
Do you have a question about the RC2 and is the answer not in the manual?
Questions and answers