Page 1
KELDAN RC1 Remote Control Operating Instructions For Professionals Who Know The Difference.
Page 2
Each channel can address an infinite number of lights simultaneously. A light can be paired with any of the two channels with a pairing mode. The range under water is about 50 meters. The RC1 remote control can also operate in air, but the range will be limited to about 1-2 meters.
Page 3
If the RC battery has been changed, the knobs must be re-calibrated. 1. Calibrate all knobs by turning them twice all the way from limit to limit. 2. When done, you are ready to use the RC1 remote control again. A new pairing is not necessary. 3. PAIRINg A pairing is needed to pair a light with the RC1 remote control.
Page 4
50m or more is possible. Brightness: 1. Set the XR compact light to remote mode. 2. Move the brightness knob on the RC1 remote control to the desired level. 3. The 9 brightness levels on the RC1 remote control correspond to the nine levels which can be set manually on the light.
Page 5
• Remove the 9V battery if the device is not used for several month. 7. WARRANty RC1 remote control carries a two-year warranty after purchase (proof of purchase date required). The warranty is limited to material defects which occur when correctly handling the product. The warranty does not cover the battery.
Page 6
(ANSI 1604 / IEC = 6LR61) 1604LC (Lithium) 1604A (Alkaline) Dimensions 160x70x40mm Weight (on air) 370 gr Weight (in water) 140 gr Range 50 Meter approx. ultrasonic Frequency Range 27’000 Hz - 37’000 Hz KELDAN RC1 Remote Control Operating Instructions...
Page 7
Tel: ++41 32 333 16 28 www.keldanlights.com Industriestrasse 37a Fax: ++41 32 333 16 26 contactus@keldanlights.com 2555 Brügg Switzerland Visit us on Facebook KELDAN is a registered trademark of KELDAN GmbH. ® Subject to change without notice, November 2020. KELDAN RC1 Remote Control Operating Instructions...
Need help?
Do you have a question about the RC1 and is the answer not in the manual?
Questions and answers