Advertisement
Quick Links
KS-200A+ WIFI user manual
KS-200A+ WIFI can use as a WIFI hotspot or a WIFI terminal.
1. As a WIFI hotspot its IP is fixed 192.168.4.1, it is used if there are no WIFI router onboard your boat.
2. As a WIFI terminal, the IP is distributed by the WIFI router. You can check the IP as shown below. It is
used if there are already WIFI router onboard your boat to share the data.
Note :
- In this manual N2K means NMEA2000
- PGN is the data in the N2K network
Configure KS-200A+ WIFI module
1. Connect KS-200A+ to N2K network, it will power up automatically
2. Check the WIFI network on your mobile or PC
3. Select the WIFI link starting with "KS-200A+"
4. Enter the default password " 12345678"
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Onwa KS-200A+ WIFI
Summary of Contents for Onwa KS-200A+ WIFI
- Page 1 KS-200A+ WIFI user manual KS-200A+ WIFI can use as a WIFI hotspot or a WIFI terminal. 1. As a WIFI hotspot its IP is fixed 192.168.4.1, it is used if there are no WIFI router onboard your boat. 2. As a WIFI terminal, the IP is distributed by the WIFI router. You can check the IP as shown below. It is used if there are already WIFI router onboard your boat to share the data.
- Page 2 Use KS-200A+ WIFI module as a hotspot Note : In case it is not necessary to connect the KS-200A+ WIFI module to WIFI router onboard please leave Wifi name and Wifi passwd blank otherwise the WIFI module will keep trying to connect to external WIFI router.
- Page 3 2. Click “Setting Wifi” to save the settings Note : it is advised to switch off the KS-200A+ and power up again to make the change valid. 3. There are a valid IP address appear when KS-200A+ WIFI module successfully connected to WIFI router onboard.
- Page 4 1.4) Select “Network” 1.5) Fill the network information as shown below.
- Page 5 2.1) Enter the Wifi name and Wifi passwd as mentioned above. Note : In case it is not necessary to connect the KS-200A+ WIFI module to WIFI router onboard please leave Wifi name and Wifi passwd blank otherwise the WIFI module will keep trying to connect to...
- Page 6 2.2) Connect PC WIFI network to WIFI router onboard. 2.3) We also use OPENCPN PC version as an example: Open OPENCPN and click 2.4) Select “Add Connection”...
- Page 7 2.5) Select “Network” 2.6) Fill the network information as shown below.
- Page 8 2.7) You can then see the data sending from KS-200A+ through WIFI router...
Need help?
Do you have a question about the KS-200A+ WIFI and is the answer not in the manual?
Questions and answers