Sony SDP-N600 Service Manual

SDP-N6O0
SDP-N600 is the Surround processor
section in LBT-N6&50AV.
SPECIFICATIONS
DIN power output Video input (phono jacks)
CENTER 20 W VIDEO 1, VIDEO 2
(8 ohms, at 1 KHz) 1 Vp-p, 75 ohm unbalanced,
_—
REAR
20 \Wo+ 20 W
sync
negative
se 2 % _ _ Bohms, at 1 kiiz) Video output (phono jacks)
Continuous RMS power output VIDEO 1
CENTER 23 W (8 ohms, at 1 kHz, 1 Vp-p, 75 ohm unbalanced,
= ik die. sync negative
REAR 23 WW 23 W (8 ohms, VIDEO 2
at 1 kHz, 5% THD) 1 Vp-p, 75 ohm unbalanced,
Music power output sync negative
CENTER 28 W (8 ohms, at 1 MONITOR
kFlz, 10% THI) 1 Vp-p, 75 ohm unbalanced,
REAR 28 W + 28 W (8 chms, sync negative
—_ at 1 kHz, 10% THD) Power requirements
ees a re ET AEP, UK, East European, CIS model :
Audio Jack Sensitivity Impedance 2211-230 V AC. 50/60 Hz
Input type ere ee | ee Australian model:
VIDEQ 1 Phono 435 (245) mV 47 kilohms 270-240 V AC, 50/60 Hz
VIDEO 2 Phono 435 (245) mV 47 kilohms Other model:
— 110-120 V or 220 V-240 V AC
( ): BE, Australian model adjustable, 50/60 Hz
Audio Jack Voltage Impedance Power consumption 63 W
output pe
aia ee oe Mass Approx. 4.6 kg
VIDEO 1 Phono 235 (245) mV 2 kilohms
Dimensions
VIDEO 2 Phono 235 (245) mV 2 kilohms Approx. 355 x 105 x 320 mm
CENTER Phono 1 kilofums (w/h/d, including projections)
OUT
( ): E, Australian model
— Continued on next page —
SURROUND PROCESSOR
SONY.