Subscribe to Our Youtube Channel
Related Manuals for KIBI K2-S19RO
Summary of Contents for KIBI K2-S19RO
- Page 1 Installation Guide Fine Fireclay Kitchen Sink K2-S19RO K2-S18SQ K2-S27 www.kibiusa.com...
- Page 2 6-Keep this booklet and the receipt (or other proof of date and place of purchase) for this product in a safe place. The receipt is necessary to request warranty parts. 7-KIBI does not accept any liability for damage to countertop, sink fixture, faucets or personal injury during installation. Warranty is void if installation guide is not followed.
-
Page 3: Tools You May Need
II. Tools you may need 1. Drill 2. Jig Saw 3. Safety Glasses 4. Tape Measure 5. Pencil 6. Level 7. Silicone 8. Silicone/Caulk Gun 9. Wood Braces 10. Framing Square 11. Suppot Frames 12. Shims, if necessary III. Installation Options We recommend under-mount Reveal, Flush-mount, Positive-mount Reveal and Drop in installation are not recommended. -
Page 4: Step 1: Countertop Preparation
Measure the size of the sink. Cut the countertop to allow the sink slide in. IMPORTANT: Due to the dimensional variation from the fireclay manufacturing process, KIBI Sinks does not offer the cutout temperate For fireclay sinks. It’s essential that prior to installation, you discuss with your installer and agree on the final appearance. -
Page 5: Step 4: Countertop Installation
Step 3: Sink installation Using two people, carefully place the sink in place. Verify that the sink can fit in the cabinet opening and rest properly on the supporting system. Make a small adjustment to fit as necessary. Verify the overall appearance and check for levelness to ensure correct drainage. Warning! To be avoid of risk of personal injury or product damage, Handle with care. -
Page 6: Drop In Installation
Place the Sink in the required position and use it as a template to draw around its perimeter. IMPORTANT: Due to the dimensional variation from the fireclay manufacturing process, KIBI Sinks does not offer the cutout temperate For fireclay sinks. It’s essential that prior to installation, you discuss with your installer and agree on the final appearance. - Page 7 Machine this new line. Step 2: Cabinet/Support frame Construction Supports Construct a wooden frame to support the sink. Measure your sink to determine the dimensions. IMPORTANT: The supports should be flush with the top of the cabinet. Due to the typical ±3mm side wall variance in manufacturing, it is recommended that you design / modify the sink cabinet to match your clients individual sink(s) need.
- Page 8 Step 3: Sink installation Turn the sink over and apply a generous bead of silicone sealant along the bottom of the sink rim. Do not use epoxy. Insert the sink into the opening, check the alignment of the sink to the cutout in the countertop and press firmly.
- Page 9 Step 4: Countertop Installation After cleaning, apply a bead of silicone sealant between the top flange (or lip) of the sink and the countertop to create a watertight seal. Clean excess silicone immediately. Verify the overall appearance and check for levelness to ensure correct drainage. Carefully place the countertop and verify that it is level. Step 5: Connect water supply and drainage system per manufacturer’s instructions.
-
Page 10: Products Care And Maintenance
VI. Products Care and Maintenance KIBI Fireclay sinks are made of clay fired at over 2,200°F and created for a lifetime of easy care. Just follow the simple guidelines listed below. Routine Care Most dirt & stains: Use soapy water or vinegar-based cleaner and a sponge and towel dry. - Page 11 VII. KIBI Limited Fireclay Sink Warranty KIBI warrants to the original purchaser of an KIBI Fireclay sink that KIBI will, at its option, replace or repair, without charge, such product if it fails due to a manufacturing defect for a period of 1 year of normal residential use.
Need help?
Do you have a question about the K2-S19RO and is the answer not in the manual?
Questions and answers