Advertisement
Lighting Control Engine 4 (turbo)
Information for Use
Read the Information for Use and the Safety Instructions
carefully. Subject to modification without prior notice.
Typographical and other errors do not justify any claim for
damages. Modification of the product is prohibited.
This manual is designed for electricians, system administrators,
and product users.
All product names and trademarks mentioned in this manual are
trademarks of their respective owners.
Except for internal use, relinquishment of the instructions to a
third party, duplication in any type or form - also extracts - as
well as exploitation and / or communication of the contents is not
permitted.
Downloads and more information at:
www.ecue.com
IC: CL25100005035, CL25100005135
Edition:
25.02.25 [EN_LCE4_Setup_v1p0]
Published by:
Traxon Technologies Europe GmbH
Karl-Schurz-Strasse 38
33100 Paderborn, Germany
©2025 Traxon Technologies Europe GmbH
All rights reserved
Traxon Technologies Europe GmbH
Sales Operations
Karl-Schurz-Str. 38
33100 Paderborn, Germany
+49 5251 54648-0
support@ecue.com
Advertisement
Table of Contents
Related Manuals for PROSPERITY GROUP TRAXON ECUE Lighting Control Engine 4
Summary of Contents for PROSPERITY GROUP TRAXON ECUE Lighting Control Engine 4
- Page 1 Lighting Control Engine 4 (turbo) Information for Use Read the Information for Use and the Safety Instructions IC: CL25100005035, CL25100005135 carefully. Subject to modification without prior notice. Typographical and other errors do not justify any claim for Edition: damages. Modification of the product is prohibited. 25.02.25 [EN_LCE4_Setup_v1p0] This manual is designed for electricians, system administrators, and product users.
- Page 2 Product — Information for Use Table of Contents Safety instructions Symbols General safety instructions General device description Lighting Control Engine 4 (turbo) Delivery content Optional accessories Product specifications Technical Data Connectors and Interfaces General remarks Transport Unpacking Warranty regulations Disposal Support Installation Mounting Power supply...
-
Page 3: Safety Instructions
Product — Information for Use | Safety instructions 1 Safety instructions Please read the safety instructions, provided in a separate manual, carefully. Make sure that the environmental, mounting, and installation prerequisites are met. This manual should be kept at a safe place and in reach of the device. Symbols The exclamation mark warns about possible damage of the device itself, to connected devices, and to the user. -
Page 4: General Device Description
Product — Information for Use | General device description — Always carry the device by using both handles. Do not carry when the red front panel is unhitched. — The red front panel of the device must be mounted in operation (fire enclosure). Remove the red front panel only when device is disconnected from mains. -
Page 5: Product Specifications
Product — Information for Use | Product specifications Delivery content Delivery content of the e:cue Lighting Control Engine 4 (turbo) - Product number CL25100005035 / CL25100005135: • Lighting Control Engine 4 (turbo), including Microsoft® Windows 11™ LTSC Enterprise and software licenses for e:cue’s SYMPHOLIGHT and Lighting Application Suite •... - Page 6 Protection class IP20 Steel, front panel powder Housing coated Mounting in 19-inch rack with rails Product — Information for Use | Product specifications Certifi cations CE, UKCA Interface specifi cations 1 x USB 3.0 Type-C (front, behind cover) 2 x USB 3.0 (front, behind cover) 1 x USB 3.2 Gen2 Type-C (rear) 1 x USB 3.2 Gen 2 (rear) 4 x USB 3.2 Gen 1 (rear)
- Page 7 Product — Information for Use | Product specifications Back panel LCE4 Back panel LCE4 turbo Main AC switch Main AC supply socket, IEC “Mainboard interfaces” (page 07) content LCE4: 1 x Ethernet interface 10/100/1000/2500 MBits/s, RJ45 LCE4 turbo: 1 x HDMI Input Capture (top), 1 x DB9 Input Capture (bottom) 1 x HDMI (second from top) 3 x DisplayPort (bottom)
- Page 8 Product — Information for Use | Product specifications 1 x PS/2 1 x USB 3.2 Gen2 2 x USB 3.2 Gen1 1 x Ethernet 10/100/1000/2500 MBits/s, RJ45 3 x Audio (Line In, Line Out, Microphone In) Antennae 1 x HDMI 2 x USB 2.0 1 x USB 3.2 Gen2 Type-C 2 x USB 3.2 Gen1...
-
Page 9: General Remarks
Product — Information for Use | General remarks 4 General remarks Transport Only transport the device in its original packaging. This protects the device from damage. Unpacking Only unpack the e:cue LCE4 (turbo) at its installation location. To protect the device against condensation water, unpack it and wait until all moisture remaining in the device has evaporated. -
Page 10: Installation
Product — Information for Use | Installation 5 Installation The installation of the LCE4 (turbo) consists of mounting the device, connections to the peripheral devices and to power supply. Supply the device with power after all cabling is completed. Connect cables and data only when the device is powered down. Mounting You can mount the Lighting Control Engine 4 (turbo) in all standard 19-inch rack systems. - Page 11 Product — Information for Use | Configuration LCE4 (turbo) Operation Connect a display and input devices (keyboard, mouse) to the Lighting Control Engine 4 (turbo). Display and input devices are always necessary when accessing any application or settings on the LCE4 (turbo). Connect the power supply and switch on the LCE4 (turbo) with the power button.
- Page 12 Product — Information for Use | Configuration Use the preferred dedicated local network range 192.168.123.xxx with one system- internal network adapter. Network Settings SYMPHOLIGHT The e:cue SYMPHOLIGHT application is pre-installed on the LCE4 (turbo). SYMPHOLIGHT is a software application to design, test, and program medium to very complex lighting designs.
-
Page 13: Troubleshooting
Product — Information for Use | Troubleshooting Start the Programmer Enterprise. Click on Extras and select Application Options: Under the Advanced tab, you can specify which network card the programmer software e:net outputs to. You can specify this setting for the Art-Net and KiNet protocols. -
Page 14: Maintenance
Product — Information for Use | Maintenance Connected Check correct There are at least Information for Use Ethernet devices e:net bindings in two Ethernet ports are not found SYMPHOLIGHT in the LCE4 (turbo). / LAS. Check Use the correct correct IP settings one. - Page 15 Product — Information for Use | Dismounting 9 Dismounting Shut down the system and disconnect from main power. Disconnect all attached cables. Dismount the e:cue LCE4 (turbo) from the rack. The dismounting is completed. Before dismounting, appropriate measures must be taken to protect the respective components against damage caused by electrostatic discharge (ESD protection).
- Page 16 Product — Information for Use | Dimensions 11 Dimensions All dimensions in mm content Please check for the latest updates and changes on the Traxon website. © 2025 TRAXON TECHNOLOGIES. ALL RIGHTS RESERVED. www.traxon-ecue.com...
Need help?
Do you have a question about the TRAXON ECUE Lighting Control Engine 4 and is the answer not in the manual?
Questions and answers