Dynex DX-24L200A12 User Manual page 16

12
DX-24L200A12
Using DVI (same as HDMI but requires a sound
connection)
To connect a DVD or Blu-ray player using DVI:
1
Make sure that your TV's power cord is unplugged
and the DVD or Blu-ray player is turned off.
2
Connect an HDMI-DVI adapter (not provided) to one
end of an HDMI cable (not provided).
3
Connect the HDMI-DVI adapter to the HDMI1 jack
on the back of your TV and to the DVI OUT jack on
the DVD or Blu-ray player.
DVD or Blu-ray player
HDMI cable with
DVI adapter
4
Connect a 3.5 mm audio cable with stereo mini plug
(not provided) to the PC AUDIO IN jack on the back
of your TV and to the AUDIO OUT jack on the DVI
device.
Note
When you connect the audio using the PC AUDIO IN
jack, the audio output is analog.
To play from a DVI device:
1
Turn on your TV and the DVD or Blu-ray player.
2
Press INPUT to open the INPUT SOURCE list.
3
Press or to select HDMI1, then press ENTER.
Note
You can also press HDMI repeatedly to select HDMI1.
4
Turn on the DVD or Blu-ray player.
Back of TV
COMPONENT IN AV IN
SERVICE PC / DVI
HDMI 2 HDMI 1 / DVI VGA
PORT AUDIO IN Y P P VIDEO L - - R
B R AUDIO
3.5 mm audio cable
Using component video (better)
To connect a DVD or Blu-ray player using component
video:
1
Make sure that your TV's power cord is unplugged
and the component video device is turned off.
2
Connect a component video cable (not provided) to
the COMPONENT IN/Y, P
your TV and to the COMPONENT OUT jacks on the
component video device.
SERVICE
PORT
DIGITAL
ANT / CABLE OUTPUT
Cables are often
color-coded to match
color-coded jacks.
3
Connect an audio cable (not provided) to the L and
R audio jacks on the side of your TV and to the L/R
AUDIO OUT jacks on the component video device.
To play from the component video device:
1
Turn on your TV, then press INPUT to open the
INPUT SOURCE list.
2
Press
ENTER.
3
Turn on the DVD or Blu-ray player.
Making connections
, P jacks on the back of
B R
Back of TV
COMPONENT IN AV IN
PC / DVI DIGITAL
HDMI 2 HDMI 1 / DVI VGA
AUDIO IN Y P P VIDEO L - - R ANT / CABLE OUTPUT
B R AUDIO
Note
When you connect the audio using the L and R audio
jacks, the audio output is analog.
or to select Component, then press
Note
You can also press COMP to select the component
video device.
DVD or Blu-ray player