Dynex DX-24L200A12 User Manual page 14

10
DX-24L200A12
Using composite video (good)
To connect a cable or satellite box using composite
video:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a composite cable (provided) to the VIDEO,
L, and R jacks on the back of your TV and to the
composite video and audio out jacks on the cable or
satellite box.
COMPONENT IN
SERVICE
PC / DVI
PORT HDMI 2 HDMI 1 / DVI VGA AUDIO IN Y
4
Turn on your TV, then turn on the cable or satellite
box.
5
Go through the setup wizard on page 17.
Cable or satellite box
75 ohm coaxial cable
Back of TV
AV IN
DIGITAL
P P L - R OUTPUT
B R VIDEO AUDIO - ANT / CABLE
Cables are often
color-coded to match
color-coded jacks.
Composite cable
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1
Turn off your TV and all connected equipment.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a coaxial cable (not provided) to the
ANT/CABLE IN jack on the side of your TV and to the
coaxial out jack on the cable or satellite box.
COMPONENT IN
SERVICE PC / DVI
HDMI 2 HDMI 1 / DVI VGA
PORT AUDIO IN Y
4
Turn on your TV, then turn on the cable or satellite
box.
5
Go through the setup wizard on page 17.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Making connections
Cable or satellite box
75 ohm coaxial cable
Coaxial cable
Back of TV
AV IN
DIGITAL
P B P R VIDEO L - AUDIO - R ANT / CABLE OUTPUT