Doss SoundBox XL Quick Start Manual page 3

Still got a problem?
Please feel free to contact our support team at <support@dossav.com>
True Wireless Stereo Pairing
1. Turn on the first speaker.
2. Turn on the second speaker.
3. Press and hold "M" button on both speakers to enter into TWS pairing.
4. Once TWS paired, the LED on primary speaker turns solid blue, while
the secondary speaker turns flashing blue.
5. Turn on Bluetooth on your device and select DOSS SoundBox XL.
Tips:
You can only switch Bluetooth and Aux in mode on the primary
speaker while TWS mode.
Connect DOSS SoundBox XL to Echo Dot
You are able to connect the speaker to Echo Dot via Bluetooth or Auxiliary.
Download Alexa app and get the dot connected to your home Wi-Fi network.
1.
Keep the speaker in waiting for pairing status.
2.
Run the Alexa app, tap Menu and then tap Settings.
3.
Tap the Echo Dot in the Alexa app and then tap Bluetooth.
4.
Select DOSS SoundBox XL in Bluetooth list. If it didn't show up in Bluetooth
list, please long press play/pause button for 5 seconds and try to reconnect.
Product Specifications
Dimension: 11.8 x 2.64 x 5.2 inch
Weight: 3.2lbs
Bluetooth range: up to 20m/66ft
Output power: 2 x 10 W + 12 W Subwoofer
Battery
Type: Li-ion 7.2v, 2600mAh
Charging time: 3 hours
Playtime: 10 Hours (at 50% volume)
Warning
DO NOT drop, hit or shake the speaker.
DO NOT disassemble, repair or modify the speaker by yourself.
DO NOT use cleaning products that contain benzene, solvents or alcohol.
DO NOT expose the speaker to excessive heat or direct sunlight for a long time.
DO NOT store the speaker in a place with humidity or dust.
DO NOT place heavy objects on top of the speaker.
DO NOT use the speaker near a microwave oven or wireless LAN products.
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.This
device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada's licence-exempt
RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
1.
This device must accept any interference, including interference that may
2.
cause undesired operation of the device.
This equipment should be installed and operated with a minumum distance of
20 cm between the radiator and your body.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
auxappareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter toutbrouillage radioélectrique subi,
même si le brouillage est susceptible d'en compromettre lefonctionnement.
CAN ICES-3(B)/NMB-3(B)
L'appareil a été évalué pour répondre aux exigences générales d'exposition aux
RF. Le dispositif peut être utilisé sans restriction dans des conditions portatives
d'exposition.
Cet équipement doit être installé et utilisé à une distance minimale de 20 cm
entre le radiateur et votre corps.