Preparation; Attaching The Base; Preparing Your Lcd Hdtv For Wall Mounting - Haier HL32P2 Owner's Manual

PREPARATION

IMPORTANT: Do not apply pressure
to the screen display area which may
compromise the integrity of the display.
The manufacturer's warranty does
not cover user abuse or improper
installations.

ATTACHING THE BASE

IMPORTANT: The Base of the HDTV
must be assembled prior to usage.
HL32P2
1. Place TV unit face down on a soft
and flat surface (blanket, foam, cloth,
etc.) to prevent any damage to the
HDTV.
2. Carefully align and insert the Base
to the stand.
3. Secure the four screws on the
bottom of the base.
PREPARING YOUR LCD HDTV
FOR WALL MOUNTING
We suggest that you keep your TV at
least 2.36 inches (60 mm) from the wall
to prevent cable interference.
Before mounting your TV on the wall,
you need to remove the base.
For your safety, please use only with
UL listed wall mount bracket with
minimum weight of the TV without
stand. (Please see page 27.)
To attach a wall mount bracket to your
TV:
HL32P2
1. Remove the screws holding your
TV to the stand.
2. Remove the stand base from your
TV.
3. Secure the wall mount bracket to
the back of your TV using four M6
screws
200 mm
HL42XP22
1. Remove the screws holding your
TV to the stand and remove the
stand base from your TV.
2. Using two screws to secure the
cover back to the bottom of the TV.
3. Secure the wall mount bracket to
the back of your TV using four M6
screws.
400 mm
NOTE
 The wall mount bracket and
the screws are not included.
10
200 mm
200 mm
1
2