Subscribe to Our Youtube Channel
Related Manuals for Red Sea MAX NANO G2 XXL
Summary of Contents for Red Sea MAX NANO G2 XXL
- Page 1 Red Sea ® NANO G2 XXL Complete Plug & Play ® Open Top Reef System Installation and Operation Manual...
- Page 2 Extend Your Peace of Mind Scan the QR code to register your system and extend your warranty MAX NANO G2 systems come with a standard 3-year warranty*, worldwide. In selected markets, you can register your new system within 90 days of purchase and receive 2 more years of warranty (5y total) for no extra charge! ** * The warranty covers the glass aquarium and...
-
Page 3: Table Of Contents
Red Sea MAX NANO G2 XXL ® ® NANO G2 XXL Installation & Operation Manual NANO G2 Components ..........4 ® Safety .................6 Location ................7 Unpacking the MAX NANO G2 ..........8 ® Specification ...............9 Assembly ................10 Installation of Rear Sump Components ........11 Installation of LED Modules ............16... - Page 4 Congratulations on your purchase of the Red Sea MAX ® NANO G2 XXL complete reef system. The Red Sea MAX ® approach to the coral reef experience is to create an environment that is specifically attuned to the needs of coral and all inhabitants on an artificial reef.
-
Page 5: Max ® Nano G2 Components
Red Sea MAX NANO G2 XXL ® MAX NANO G2 XXL Components... - Page 6 Red Sea MAX NANO G2 XXL ® Component MAX NANO G2 XXL Component MAX NANO G2 XXL ReefLED 50 Mounting Arm R40600 Impellor RS Flow R50402 ReefLED ReefLED 50 Pump outlet nozzle R40590 Switch box R40588 ReefATO+ sensor clip R40621 Skimmer &...
-
Page 7: Safety
Red Sea MAX NANO G2 XXL ® 1 Safety Please read and follow all safety instructions. d. Always unplug an appliance from an outlet when not in use, before putting on or taking off parts, and before cleaning. Never pull the cord DANGER: To avoid possible electric shock, special care should be itself to remove the plug from the outlet. -
Page 8: Location
Red Sea MAX NANO G2 XXL ® 2 Location ® The first step in setting up the MAX NANO G2 is to choose a suitable location. Electric Supply Accessibility ® • Back: Ensure that there is at least 10cm (4") of clearance behind the... -
Page 9: Unpacking The Max Nano G2
CAUTION: The aquarium has a bare glass bottom. Before removing the aquarium from the box prepare a smooth, soft, clean flat surface that can hold its weight and place the EVA mat on it. Approximate weights of Aquarium (empty) Model Metric (kg) Imperial (lb) MAX NANO G2 XXL 65.2... -
Page 10: Specification
NANO G2 XXL ® ® ® NANO G2 type glass aquarium with integral rear sump 200L (53gal) Rear Sump Protein Skimmer Max NANO G2 XXL Circulation pumps 2 x 1550lph (410 gph) ® NANO G2 Cabinet (optional) Self-assembly Pump Switch-box ... -
Page 11: Assembly
Red Sea MAX NANO G2 XXL ® 5 Assembly 5.2 Pump Switch-boxes Align the Pump Switch-box with the holes provided in the rear wall of the Perform the assembly and installation of all of the components in the aquarium and fix into position with the screws provided. Do not attach the order described below before adding the water to the system. -
Page 12: Installation Of Rear Sump Components
Red Sea MAX NANO G2 XXL ® 6 Installation of Rear Sump Components 1. Detachable Surface Skimmer 2. Protein Skimmer 3. Carbon 4. Circulation Pump 5. Pump Outlet Nozzle 6. Bubble trap sponge 7. Skimmer Outlet Sponge 8. Micron Filter Sponge 9. - Page 13 Red Sea MAX NANO G2 XXL ® Overview of the MAX NANO G2 filtration 6.1 Protein Skimmer: ® and circulation system The MAX ® NANO G2 protein skimmer consists of three parts: skimmer body, The MAX NANO G2 rear sump has a complete multistage filtration ®...
- Page 14 Surface Skimmer/comb NOTE: The MAX NANO G2 is supplied with a 225 Micron thin mesh filter ® bag (#40580). 100 micron fine polishing filter bags (#40581) are available from Red Sea dealers. skimmer cable...
-
Page 15: Circulation Pumps
Red Sea MAX NANO G2 XXL ® 6.4 Optional silensing sponges 6.5 Circulation Pumps: In the event that ther is excessive water noise, silencing sponges can Familiarize yourself with the multidirectional outlet as shown in the be added to one or both sections at the surface skimmer. to prevent an drawing. - Page 16 Red Sea MAX NANO G2 XXL ® fixed into the glass. This part is a tight fit so that it 6.6 Sump Screen: will not float out during any pump maintenance but Position the sump screen above the front wall of the rear sump. Align the can be removed if necessary for cleaning.
-
Page 17: Installation Of Led Modules
Red Sea MAX NANO G2 XXL ® 7 Installation of LED Modules To attach the LED mounting arm to the switchbox hold it so that the pin at the bottom of the arm is over the hole in the switchbox and the... -
Page 18: Operation Of Pump Switch-Box
Red Sea MAX NANO G2 XXL ® Thread the cable through the recess provided in the back of the Pump 8 Operation of Pump Switch-box Switch Box. Un-tighten the fixing screw on the top of the swivel connector. Adjust the position of the ReefLED until it is parallel with the top of the The Pump Switch-box is designed to provide easy on/off control of the aquarium and re-tighten the fixing screw. -
Page 19: Led Set Up And Programming
Red Sea MAX NANO G2 XXL ® 9 LED Set up and programming When introducing new corals to already acclimated systems, start by positioning them at the lower levels of the aquarium and gradually raising To set up and program the ReefLED 50 follow the instructions provided them to their desired position over a period of several weeks. -
Page 20: Operation Of The Protein Skimmer
Red Sea MAX NANO G2 XXL ® 11 Operation of the Protein New Skimmers or Set-ups Skimmers only produce foam if the Skimmer water contains the proteins that bind to the surface of the air bubbles and give Adjustment of the skimmer will be necessary from time to time due to the the bubbles the structural rigidity they constant changes in density and organic material in the water. -
Page 21: General Aquarium Maintenance
Red Sea MAX NANO G2 XXL ® 12 General Aquarium Maintenance Protein skimmer Check the foam production in the collection cup and reposition the Skim ® The long-term success and health of the inhabitants of your MAX aquarium Adjuster or air flow as required to maintain a stable dry foam. Empty and depends on you. - Page 22 Red Sea MAX NANO G2 XXL ® NOTE: If the pump makes mechanical noise after cleaning, replace the impeller. The impeller is a wear item and may need to be replaced periodically. Water temperature control For optimum conditions a reef aquarium should be maintained at a stable water temperature in the range of 24-28°C / 76-82°F (the stability of the...
-
Page 23: Adding Optional Devices
Red Sea MAX NANO G2 XXL ® 13 Adding Optional Devices NanoMat Remove the filter bag holder and follow the installation instructions provided with the NanoMat. - Page 24 Red Sea MAX NANO G2 XXL ® ReefATO+ Install the ReefATO+ sensor in the holder as shown. follow the instractions provided with the ReefATO+ to complete the installation. Click...
-
Page 25: Trouble Shooting
Red Sea MAX NANO G2 XXL ® 14 Trouble shooting Q. My set up is not new and skimmer isn’t producing foam or it is too dry Q. My set up is new and the skimmer doesn’t seem to be skimming. - Page 26 Red Sea MAX NANO G2 XXL ® Q. The circulation pump is injecting micro-bubbles into the aquarium. skimmer chamber and flow out through the pumps. We strongly recommend NOT using tap water. If you are using tap water DO NOT A.
-
Page 27: Warranty
To the full extent allowed by applicable law, in no by the original purchaser (hereinafter “the Original Purchase Date”), as further event shall Red Sea be liable for any loss or damage to aquatic life, and/or detailed below. - Page 28 Components or tampering with the Covered Components by anyone other than an authorized Red Sea service center, or failure to use or assemble the Covered TERMS AND CONDITIONS OF EXTENDED WARRANTY...
- Page 29 東京都板橋区前野町6-29-4 Cheddar, BS279AG Prinzenallee 7 (Prinzenpark) TX 77032, U.S.A d’Avre et d’Iton, France Road,Xinhua Industrial Park, uk.info@redseafish.com 40549 Düsseldorf info@mmcplanning.com support.usa@redseafish.com support.fr@redseafish.com Huadu District, Guangzhou City, support.de@redseafish.com China, Postal code 510812. Tel: +86-020-6625 3828 info.china@redseafish.com MAX NANO G2 XXL Manual_ENG_V24A...
Need help?
Do you have a question about the MAX NANO G2 XXL and is the answer not in the manual?
Questions and answers