Pyle PLMRW12 User Manual

Visit Our Website
SCAN ME
PyleUSA.com
Technical Speci cations
•
Speaker Size: 12''
•
Cone Material: High-Quality Polypropylene
•
Construction: Water-Resistant Design
•
Magnet Structure: 60 Oz
•
Voice Coil: 2'' High-Temperature
•
Peak Power Handling: 600 Watts
•
Frequency Response: 20 Hz – 2.2 kHz
•
Impedance: 4 Ohms
•
Sensitivity: 95 dB
•
Overall Diameter: 12.7''
•
Mounting Depth: 5.25''
Mounting Instructions:
1. Select a Suitable Location: Ensure the mounting
area is structurally sound and free from obstructions.
Avoid areas prone to excessive moisture or heat.
2. Cut the Mounting Hole: If installing into a panel,
cut a hole large enough to t the subwoofer's
mounting depth (5.25'').
3. Connect the Wiring: Attach the positive (+) and
negative (-) terminals of the subwoofer to the
corresponding terminals on your ampli er.
4. Secure the Subwoofer: Use the included mounting
screws to fasten the subwoofer into place.
Ensure a tight and secure t.
5. Test the Sound: Power on your audio system and
verify proper operation before nalizing the
installation.
Register Product
Thank you for choosing PyleUSA. By registering your product, you ensure that
you receive the full bene ts of our exclusive warranty and personalized
customer support. Complete the form to access expert support and to keep
your PyleUSA purchase in perfect condition.
www.PyleUSA.com
PLMRW12
12'' Marine Subwoofer, 600 Watt
USER GUIDE
Start Here
Model Number:
PLMRW12
PyleUSA.com/pages/register