Related Manuals for Pyle PSUB10A
Summary of Contents for Pyle PSUB10A
- Page 1 PSUB10A 10'' Active Down-Firing Subwoofer Ported Design with High-to-Low Input Level Controller (Black)
-
Page 2: Safety First
• Follow all instructions hand for future reference. • Use the equipment only for its intended PSUB10A is ideal for adding music to purpose as instructed in this manual • Before installing, observe the applicable home, o ce, schools, restaurants or safety regulations for your country cafe. -
Page 3: Getting Started
WARNINGS When in use, this product is capable of producing high sound-pressure levels (SPL) that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, CAUTION: avoid prolonged exposure to volumes Never remove the cover, because in excess of 90dB. - Page 4 8. Line IN RCA Plugs 4. Power Mode LED This LED indicates which is the current 9. Boss-Re ex Port mode of operation and it's behavior 10. High Level Inputs/Outputs depending on the Power Mode switch Feed audio to your active subwoofer (3): Green: Subwoofer ON and active directly from your HI-FI ampli er's with audio input signal Solid Red:...
- Page 5 HANDS ON SUBWOOFER OUTPUT FROM RECEIVER When connecting the speaker to a receiver with a lowpass ltered subwoofer dedicated output, be sure to turn the crossover frequency to the maximum. In this manner we bypass the speaker internal crossover, so it does not interfere with the already processed signal.
- Page 6 OUTPUT FROM HI-FI AMPLIFIER This process serves a dual purpose as a You can connect the speaker directly to safety measure. It is a hidden control, the ampli er's output (with a maxi- especially from children and it will mum total power of 200W) using the prevent accidentally increasing the high level inputs/outputs following the volume of the speaker to dangerous...
-
Page 7: Troubleshooting
Problem: Intermittent Output Action to Solution: • Most probably is a faulty connection • Verify all the connections in the system. If no problem detected, check the power mode LED. If the LED is turning red erratically, try connecting another signal source to the speaker and see if the problem persists. - Page 8 Questions? Issues? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.com...