Huawei GT4 PRO Manual
Also See for GT4 PRO:

Advertisement

Huawei GT4 PRO Manual

Introduction

Thank you for choosing our smart watch. You can read this manual to fully understand how to use the device. This device is mainly connected to the mobile phone through Bluetooth for adaptation and use. It provides a variety of practical functions and services to facilitate your operation of the mobile phone. Human movement and health functions. The company reserves the right to modify the contents of this manual without any prior notice without notice

Operating instructions

Side button function:

  1. Up button: Function button: Single press to enter Gypsophila; when in other application interface, single press to return to the upper level interface; Double-press to switch menu style on menu interface;
  2. Down button: long press to switch the machine; single press on the dial interface to turn on and off the screen, other interfaces return to the dial interface with one key.

Touch gesture: Double-click on the dial interface to enter the SIRI interface; swipe left to switch to the component interface; swipe right to enter the split-screen UI; swipe down to enter the control center; swipe up to enter information; after entering each function, swipe right to return.
Dial switch: The rotary encoder switches the dial.
Strap replacement: Pull forward with one hand, and push forward with the other hand at the same time, the strap can be easily disassembled.

Charging instructions

It supports wireless charging. When charging, place the watch on the disc, and support the computer USB or mobile phone 5V standard charger, which can be fully charged in about 150 minutes.
Horizontal and vertical charging screen: When connected to the power supply and placed horizontally or vertically, the bedside clock interface will be displayed.
Connection between watch and mobile phone: First, the mobile phone must download the APP "RDFit" to the mobile phone and install it in two ways.

  1. IOS/Android phone user:
    Scan the QR code below through the mobile browser, or scan it with WeChat. When the interface is opened, click the Android/iOS download option and choose to open the download with the mobile browser.
    The QR code in the figure below is the RDFit APP download
    Android/iOS
    App only

  2. For Android phones, search for "RDFit" and download in App Store, Google Play, and various mobile app stores, and for Apple phones, search for "RDFit" and download on the App Store.

www.apple.com

play.google.com

After the download is complete, there will be various permission reminders during the installation process, click to agree to all, and the watch and the mobile phone must be connected to two Bluetooth 3.0 and 5.0 to realize all functions.

Bluetooth 5.0 connection method: After the installation is completed, open "RDFit" and turn on the mobile phone Bluetooth. The RDFit will be prompted with an activation notification. Click OK. Click more in the lower right corner, enter the scanning device, search the Watch4 Pro Bluetooth address and click Connect. Some Android phones need to turn on the mobile GPS to find the watch Bluetooth name.

Bluetooth 3.0 connection method:

  1. Turn on Watch 3.0 Bluetooth and Watch4 Pro audio Bluetooth will pop up on the mobile phone after the APP terminal is connected successfully.
    (Note: To prevent high power consumption during connection use, it is recommended to turn off the media audio switch in Bluetooth)

How to verify that the Bluetooth connection is successful:
The watch pulls down the status bar on the standby interface. When the Bluetooth of the watch 3.0 and 5.0 are blue + green, it means that the Bluetooth connection is successful. When the color of the Bluetooth logo is grayed out, it means that the Bluetooth is not connected.

Simple handling methods for common problems:
Since the Bluetooth protocol of each mobile phone brand is not uniform, sometimes the Bluetooth connection between the mobile phone and the watch may be unstable. You can turn off the Bluetooth of the mobile phone and reconnect it again, or restore the watch to the factory settings.

How to set the notifications:
Mobile phone enters settings-application management, find "RDFit"-permission management, open all. Then enter the notification management-find all the permissions of "RDFit" to open.
Open "RDFit"-more-application push-open the background running permission, enter the option without restrictions. When you return, you will be prompted to open the auto-start again and enter the open. Go back, select the APP for synchronization information notification, such as QQ WeChat, and select Open.
Note: If the WeChat computer version is online at the same time, the mobile phone will not receive notifications. Some mobile phones also need to add "RDFit" to the power saving whitelist to avoid being turned off by the mobile phone when the battery is low.

What should I do if I do not receive the notification?
First of all, the notification function of the watch is only to synchronize the notification function of the mobile phone, such as incoming call and letter, QQ WeChat letter reminder, if your mobile phone does not receive the notification, then the watch will not receive it. You should find the corresponding APP in the phone settings-notification function, Turn on the permission notification.

Main function introduction

Encoder: The dial button on the standby interface can switch the dial, and it can slide up and down in the secondary menu; the gypsophila style menu can be zoomed in and out, After the interface is maximized, you can enter the application in the middle of the interface.
Split Screen: Swipe right on the dial interface to enter the split screen function, and you can quickly enter the corresponding function;
Watch face push: It can push APP-side pointer dials, digital dials and custom dials.
Dialpad: Connect the mobile phone to make a call, and the call can be realized on the watch side.
Call records: It can synchronize the call records of the mobile phone.
Phone book: You can add 20 contacts to the phone book of the watch through the APP
Pedometer: You can view the number of steps in a day, historical steps, calorie consumption and walking distance of the day. After 24 o'clock every night, the data of the day will be stored as historical data, and the interface data will be reset to 0.
Information: View the messages pushed on the mobile terminal, support facebook, twitter, whatsapp, qq, WeChat, etc.
Music: Can control to play music in the phone. Connect 5.0 Bluetooth, only support the mobile phone to play songs; Connect 3.0 supports the watch end to play songs
Heart rate: Put the watch close to your wrist, and the best place to wear it is the wrist bone above your arm. The real-time heart rate can be measured. The normal range is 60-90 beats/min.
Blood oxygen: The measurement starts when you enter it. Please keep your arm at rest during measurement, and the value will be measured after about 20 seconds.
Blood pressure: The monitoring starts when you enter it. When monitoring, please lay your hands flat, and the value will be measured after about 12 seconds. (This app is not a medical device. Data obtained during the use of this app is for reference only, and should not be used for clinical diagnosis, medical research, diagnostic, or treatment purposes.)
Alarm: Five alarm clocks can be synchronized through the APP; The watch can also set an alarm clock.
Voice (Siri): After connecting to Bluetooth 3.0/5.0, tap Siri on the watch to chat
Sleep monitoring: The sleep duration and sleep quality from 21:00 on the same day to 9 a.m. the next day will be recorded to help better adjust personal work and rest time and improve sleep quality. Sleep data can be viewed simultaneously by connecting to the APP.
Sports: The watch has a variety of special sports: such as running, walking, football, badminton, tennis, basketball, table tennis, cycling, yoga, rope skipping, mountain climbing; it can be connected to the APP to view the sports data of t he watch.
Remote photo: When the phone is not locked, the watch enters the Bluetooth camera, the phone enters the camera interface, tap the watch to take a photo, and the photo will be stored in the mobile phone album.
Find phone: Connect to Bluetooth, click to find the phone on the watch, and the phone's ringtone will ring until canceled. Find device: Tap the search device on the APP side, and the watch side will continue to vibrate until canceled.
Weather: After connecting to Bluetooth, the watch terminal can display the weather conditions for the next 3 days.
Stopwatch: Turn on this function to perform single or multiple timing.
Breathe: The length of exercise and breathing rate can be set.
Calculator: Simple calculation can be performed after entering.
Menu style: You can choose starry style, straight list style, rotating style, roulette style, arc list style, etc. according to your own preferences.
Set up: System settings can be made
Calendar: Can view the current month's calendar
Movement track: The watch is connected to the APP, and the APP terminal enters the special sports: running, walking, cycling, and climbing can be synchronized to the watch terminal and displayed at the same time
QR code: The watch is connected to the APP and can be pushed through the APP: WeChat, QQ, Alipay, others, whasapp, Twitter, linkedin, Instagram, Facebook, weibo, line, Tim, Snapchat, Viber, PayPal, and the QR code of third-party applications can be sent to the watch. Scan QR code to add friends
Component function: Swipe right on the dial interface and click the plus sign to start adding components. The components include: heart rate, blood pressure, blood oxygen, sleep, breathing, step counting, weather, and music; up to 5 components can be added, and long press the component to click the minus sign. Remove components.
Lock dial: In the dial drop-down menu bar, click the lock dial switch to lock the current dial; then click the lock dial switch to unlock it; after the dial is locked, turning the encoder cannot switch the dial
Always on: When the screen is turned off, there will be a pointer display when the bracelet is turned off.
Lingdong Island: Turn on the Lingdong Island switch in the settings. When opening a specified application, it can be displayed on the dial head and can be clicked to enter (currently only supports Message push, timer, and charging display functions)

Settings: Various local settings can be made.
Screen off time:
Enter to set the screen on time:
Always on time: You can set the time that the pointer is always on
Gesture: Turn it on or off according to your needs.
Connect APP: Use your mobile phone to scan the two-dimensional code, you will be redirected to the RDFit APP download
Brightness: enter the adjustable screen brightness
NFC: This function has been turned on and can be used directly
Do not disturb mode: can be set to do not disturb all day or regularly;
Vibration intensity: the vibration mode can be turned on to adjust the vibration feeling;
Language: Support multiple languages, choose according to your needs
Power off: Enter to power off the watch.
Restart: Enter to restart the watch.
Restore factory settings: Generally, when some software problems occur, restore factory settings can solve it.
About: You can view the watch model, software version and watch Mac address.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Huawei GT4 PRO Manual

Advertisement

Need help?

Need help?

Do you have a question about the GT4 PRO and is the answer not in the manual?

Questions and answers

Table of Contents