Advertisement
4 To replace the back panel, insert
the end of the panel under the lip
of the roller cover (24-n), then
lower the panel into position.
5 Hold the back panel in position,
and replace the side clips (25).
Metal cap and envelope
misaligned: If mishandled, the
envelope and the metal cap may
become misaligned (26). If the
cap and tape on the back of the
envelope are not parallel, tap the
length of the cap lightly against a
flat, solid surface.
Your Polaroid Model 545i Film
Holder has been thoroughly
tested and inspected before ship-
ment. All parts are guaranteed
against defects in materials and
workmanship for one full year
from the date of original purchase.
During this period, any such defects
will be remedied by Polaroid
Corporation without charge, except
for transportation costs.
Damage resulting from normal
wear, mishandling or accident will
be promptly repaired at a reason-
able charge. To make returns, pack
the holder carefully in its original
shipping carton or other sturdy
container with plenty of padding
and ship it prepaid to the nearest
Polaroid Office.
English 10
The Polaroid instant film process
uses a caustic paste. Avoid contact
with skin, eyes and mouth and keep
away from children and animals. If
you get some paste on your skin,
wipe it off immediately and wash
with water to avoid an alkali burn.
If eye or mouth contact occurs,
quickly wash the area with plenty of
water and see a doctor. Keep
discarded materials away from
children, animals, clothing and
furniture.
Advertisement
