Subscribe to Our Youtube Channel
Related Manuals for SUPERNOVA VK-2948
Summary of Contents for SUPERNOVA VK-2948
- Page 1 © 2025 Order #XXXXX VK-2948 - 10’ x 20’ LED Lightbox 20’ 10’ Top View Perspective View SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please email us at info@classicexhibits.com...
-
Page 2: Plan View
© 2025 Order #XXXXX Plan View = 1 sq foot... -
Page 3: General Setup Instructions
© 2025 Order #XXXXX General Information General Setup Instructions - Read entire setup instruction manual prior to WARNING unpacking parts and pieces. - The setup instructions are created specifically for this configuration. - Setup instructions are laid out sequentially in steps, including exploded views with detailed explanation for assembly. - Page 4 © 2025 Order #XXXXX CEI110 Frame Assembly Disassembly Slide both connectors across seam of extrusions. Tighten all knobs. Straight Connection 1) Loosen all knobs. Straight Connector When assembling frame, first attach all straight 2) Slide connectors off of one extrusion. connectors, then attach corner connectors.
- Page 5 © 2025 Order #XXXXX SEG Installation The Perfect Fit SEG Graphic Installation in 3 Steps STEP 1: Attach Corners STEP 2: Attach Middle STEP 3: Attach Sides Always insert graphic into each alternate corner, then into the sides of the frame. Otherwise the graphic will not fit into the frame correctly.
- Page 6 © 2025 Order #XXXXX Case Packing Top View of Each Level Graphics Setup Hardware Level 1 Level 2 Level 3 (Bottom level) Case 1 of 3...
- Page 7 © 2025 Order #XXXXX Case Packing Top View of Each Level Graphics Setup Hardware Level 1 Level 2 Level 3 Level 4 (Bottom level) Case 2 of 3...
- Page 8 © 2025 Order #XXXXX Case Packing Top View of Each Level Graphics Setup Hardware Level 1 Level 2 Level 3 (Bottom level) Case 3 of 3...
- Page 9 © 2025 Order #XXXXX Backwall Assembly Steps: Item Qty. Description 1) Assemble CEI110 extrusions together, as shown, flat on Base Plate floor. See CEI110 Frame Assembly sheet for details. 2,2A 47.5” CEI110 Vertical Extrusion 2) Attach verticals [9] into assembled frame as shown. 3,3A 47.5”...
- Page 10 © 2025 Order #XXXXX Backwall Wiring Steps: 1) Connect lights and transformers. See Light to Light Connection and Light to Transformer Connection details. 2) Install SEG graphic to front and back of assembled frames. See SEG Installation sheet for details. Power Power Break...
-
Page 11: Front View
© 2025 Order #XXXXX Backwall Attachments Steps: Refer to the SEG Installation general information page. 1) Apply SEG graphics to front of frame assemblies. 2) Apply SEG blockers to back of frame assemblies. l o c k e r l o c k e r r a p h i c...
Need help?
Do you have a question about the VK-2948 and is the answer not in the manual?
Questions and answers