Hunter 20578 Quick Start Manual And Installation Manual page 24

10.3
Removing the Light Fixture
Unscrew the light bulb socket. Pull the large (male) plug connector
through the hole in the center of the lower switch housing. Then, pull out
the small (female) connector.
10.5
Removing the Light Fixture
Install the switch housing cap and plug button to the lower switch
housing.
10 • Removing the Light Fixture
20 20
42798-01 • 12/28/09 • Hunter Fan Company
10.4
Removing the Light Fixture
Remove the light fixture bracket by removing the 2 screws attaching the
bracket to the lower switch housing.
10.6
Connect the upper plug connector from the motor to the lower plug
connector in the lower switch housing. Attach the lower switch housing to
the upper switch housing with three housing assembly screws.