VESPA Primavera TECH ELETTRICA 2024 Manual
  1. Manuals
  2. Brands
  3. VESPA Manuals
  4. Scooter
  5. Primavera TECH ELETTRICA 2024
  6. Manual
VESPA Primavera TECH ELETTRICA 2024 Manual

VESPA Primavera TECH ELETTRICA 2024 Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Dear Customer,
Thank you for choosing a Vespa vehicle.
We have prepared this guide to give you some of the main points and recommendations for using your vehicle. Before you start riding, we
recommend that you read the complete version in all its parts, available only in digital form, accessible via the QRcode on the cover or by
connecting to the website https://manuals.vespa.com.
We recommend that you keep this guide to facilitate consultation and deliver it to the new Owner in the event of sale, as it constitutes an
integral part of the vehicle. Happy reading and enjoy your journey!
VESPA PRIMAVERA TECH ELETTRICA
Ed: 02-07_2024 Cod. 1Q001043; 1Q001043QK (EN)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Primavera TECH ELETTRICA 2024 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for VESPA Primavera TECH ELETTRICA 2024

Summary of Contents for VESPA Primavera TECH ELETTRICA 2024

  • Page 1 Dear Customer, Thank you for choosing a Vespa vehicle. We have prepared this guide to give you some of the main points and recommendations for using your vehicle. Before you start riding, we recommend that you read the complete version in all its parts, available only in digital form, accessible via the QRcode on the cover or by connecting to the website https://manuals.vespa.com.
  • Page 2 The instructions given in this manual are intended to provide a clear and simple guide for using your vehicle. Details are also given of routine maintenance procedures and regular checks which should be carried out on the vehicle by a Vespa dealer or authorised service centre.
  • Page 3 This use and maintenance manual contains paragraphs identified by signal word DANGER, with warnings for avoiding accident or injury, and paragraphs identified by the signal words WARNING and NOTE, with information to help the user avoid improper use of the vehicle and its components.

  • Page 5: Table Of Contents

    LIST OF TOPICS STAND..................54 GENERAL MANDATORY REQUIREMENTS...... GENERAL PRECAUTIONS AND WARNINGS......8 SAFE RIDING................. 55 VEHICLE................MAINTENANCE..............INSTRUMENT CLUSTER............10 HUB OIL LEVEL..............60 INDICATOR LIGHT UNIT............11 TYRES..................61 DIGITAL DISPLAY..............13 BRAKE FLUID LEVEL CHECK..........61 MODE BUTTON..............28 BATTERY................62 STARTER SWITCH..............28 INSTALLING A NEW BATTERY..........
  • Page 6 LIST OF TOPICS...

  • Page 7: General Mandatory Requirements

    VESPA PRIMAVERA TECH ELETTRICA CHAPTER 01 General mandatory requirements...

  • Page 8: General Precautions And Warnings

    General precautions and warnings ATTENTION ATTENTION ATTENTION BEFORE RECHARGING, MAKE SURE MODIFICATION THAT ELECTRICAL SYSTEM TAMPERING OF THE ELECTRICAL TO WHICH THE VEHICLE WILL BE SYSTEM, BATTERIES, CONNECTED COMPLIES WITH THE CHARGE CABLE AND THE ELECTRIC NEVER TAMPER WITH APPLICABLE LEGISLATION. MOTOR UNIT RESULT...

  • Page 9: Vehicle

    VESPA PRIMAVERA TECH ELETTRICA CHAPTER 02 Vehicle...

  • Page 10: Instrument Cluster

    Instrument cluster C = Horn button G = Instrument panel Instrument cluster: D = Turn indicator switch H =Emergency cut-off switch - RUN-OFF A = Saddle opening button E = Rear brake lever I = Front brake lever B = Area for passive recognition (remote control, TAG) F = Light switches L = Throttle grip...

  • Page 11: Indicator Light Unit

    M = MODE button N = MAP button / Horn O = Starter switch Indicator light unit C = Low traction battery charge warning E = Immobiliser LED Warning light unit key: D = READY lamp - selected riding mode F = Digital display light sensor A = Turn signal indicator light;...
  • Page 12 H = ABS warning light This lamp illuminates if a VMS (Vehicle Management System) fault or Immobilizer I = Engine stop lamp (starting inhibited) anti-theft system fault is detected. Take the L = Digital display vehicle to a Dealership or an Authorised Service Centre as soon as possible.

  • Page 13: Digital Display

    Digital display D = Traction battery power output H = Charge plug not stowed correctly Digital display key: warning icon E = Selected riding mode icon A = Multifunctional panel I = TURTLE icon F = Clock (12h or 24h format) B = Speedometer G = Side stand icon (provision) C = Recovered energy...
  • Page 14 START NAVIGATION WITHIN THE M = Electric motor overheating icon INSTRUMENT PANEL FUNCTIONS. N = MIL icon O= Icon for connection between the VESPA App on the smartphone and VMP control unit on the vehicle: • if steady, the application communicates with the control unit;...
  • Page 15 ON if less than 300 Km remain until the Electric motor overheating icon next service. This icon indicates overheating of the motor, 3 . Steady: the icon is displayed steadily following which the control management when the mileage for the service interval implements protection strategy.
  • Page 16 • Braking 1: low brake energy recover; STAND WHILE ENGINE RUNNING CAUSES ENGINE SHUT- • Braking 2: high brake energy recovery. DOWN. TAMPERING WITH THIS SAFETY FUNCTION CAUSE PERSONAL INJURY AND DAMAGE TO THE VEHICLE. Riding style indicator This indicator provides the rider with energy consumption information relative to the Side stand icon (if present) riding mode selected in the form of a bar...
  • Page 17 represent the power recovered from the “"SETTING" > "Audible warning signal" Multifunctional panel traction battery and light downwards as the > power recovered increases. The MODE selector is used to navigate • “Activation speed” > MODE button through the functions of the multifunctional to the RIGHT or LEFT to set the panel.
  • Page 18 "PRESS BRIEFLY AND RELEASE": ATTENTION PRESS THE BUTTON AND RELEASE WITHIN 0.5 SECONDS; "PRESS AND HOLD": PRESS AND HOLD THE BUTTON FOR AT LEAST 2 FOR THE RIDER AND PASSENGER SECONDS SAFETY, THE "SETTINGS" FUNCTION IS ONLY ACCESSIBLE WHEN THE VEHICLE IS STATIONARY.
  • Page 19 Briefly press the MODE button to the Scroll through the options to be changed • Software version: RIGHT or LEFT to cyclically highlight the and confirm the change with a short • View desired submenu: CENTRAL press of the MODE button. •...
  • Page 20 SETTING menu; Briefly press • 12h format: ON-OFF via the specific "Vespa" app installed on the the MODE button to the RIGHT or LEFT to • 24h format: ON-OFF smartphone itself.
  • Page 21 REQUEST by pressing the MODE button the caller's name and the SMS reception in the middle briefly . notification on the display. The message confirming that pairing with the smartphone is enabled appears on the digital display. Enable the bluetooth search on your smartphone, select the "PMP3: XXXX"...
  • Page 22 PERFORM THE LOGIN AND THE press the MODE button briefly in the DISPLAY FIRST CONNECTION middle. Repeat the procedure to pair the Search for the "Vespa" application in VEHICLE AGAIN). smartphone. Play Store or App Store and install it. • CASE...
  • Page 23 The image on the For specific information about the side shows: pairing of the "Vespa MIA" system and for any differences in the procedure • Text alarms, contact a Dealership or an...
  • Page 24 The The information for the music management corresponding two icons will appear on the is shown in the relative area on the digital • Info messages. digital display (VESPA MIA - Smartphone ). display: • Track playing • Playback paused...
  • Page 25 GPS NAVIGATION call BUTTON LONG PRESS Combined with the "Vespa" application, the Play track CENTRAL "Vespa MIA" system allows the display of BUTTON BRIEF Cancel outgoing GPS indications on the digital display. By CENTRAL PRESS call means of pictograms, distance and travel...
  • Page 26 During navigation, you can return to the instrument panel home screen at any time (and vice versa) while keeping the navigation active. SETTING DESTINATION ADDRESS "VESPA" APPLICATION, THE DIGITAL DISPLAY AUTOMATICALLY DISPLAYS INDICATION SCREEN.

  • Page 27: Gps Navigation Display

    GPS navigation display C = indication regarding the current speed F = indication following the next manoeuvre GPS navigation display key: (tachometer) G = distance to the next manoeuvre A = distance related to indication "E" D = destination or next turn address H = Estimated time of arrival at destination B = indication regarding the speed limit E = next manoeuvre symbol...

  • Page 28: Mode Button

    "Remote between the VMP - Vespa Multimedia end of the stroke in "LOCK" position or must control". Platform unit and the smartphone device be perfectly aligned to the "OFF" position.

  • Page 29: Engaging The Steering Lock

    THEREFORE, UNAUTHORISED Disengaging the steering lock PERSON COULD TURN THE SWITCH Turn the starter switch to the "OFF" position. AND EXIT THE ENGAGED STEERING LOCK POSITION (IF THE KNOB WAS SET TO THE "LOCK" AND "OFF" POSITION), OR TURN THE KNOB TO "ON"...

  • Page 30: Light Switch

    Light switch EXCEPT CASE EMERGENCY, NEVER When the light switch "F" is in position "0" MOTOR CUT-OUT SWITCH WHILE THE the low-beam light is ON; when it is in VEHICLE IS MOVING. position "1" the high-beam light is ON. Moving the light switch to "2" the high beam The relative warning lamp illuminates on light flashes.
  • Page 31 AT VERY LOW SPEEDS (LESS THAN 5 THE ABS WARNING LIGHT TURNS ON km/h) THE ABS SYSTEM IS DISABLED. AND STAYS ON UNTIL REACHING 5 km/h. IT IS THEREFORE RECOMMENDED TO PAY ATTENTION IN CASES OF BRAKING IN LOW GRIP CONDITIONS WARNING AT LOW SPEED (FOR EXAMPLE BRAKING ON GARAGE FLOOR TILES...

  • Page 32: The Immobilizer System

    The Immobilizer system ATTENTION In order to enhance theft protection, the vehicle is equipped with a "PIAGGIO IMMOBILIZER" electronic engine locking device. WHEN THE IMMOBILIZER INDICATOR LIGHT AND THE TURN INDICATORS By pressing and releasing the starter switch, FLASH, IT WILL BE POSSIBLE TO the "PIAGGIO IMMOBILIZER"...
  • Page 33 system, which allows to enable the starter These functions are permanently active as OTHER WIRELESS switch without having to insert a mechanical long as the remote control is correctly COMMUNICATION DEVICES, SUCH key into the appropriate key cylinder. paired. AS A RADIO OR MOBILE PHONE; •...
  • Page 34 courtesy lights will illuminate for a period When the LED on the remote control turns of 50 to 30 seconds (depending on when green, it will be possible to authenticate the the remote control is deactivated) and then "Piaggio Keyless" system. Authentication switch off permanently.
  • Page 35 from the memory. Any lost remote controls Then, to check the state of the "Piaggio will therefore not be enabled to start the Keyless" system, slightly press on one of engine. the two keys of the remote control. The LED will show the state with a colour: •...
  • Page 36 lamp will flash to notify the rider of the WARNING situation. This function warns the user if they leave the key behind after starting the vehicle. The IMMOBILIZER warning lamp on the LEAVE REMOTE dashboard flashes to warn the user CONTROL STORAGE that the Keyless system is not working...
  • Page 37 to indicate that the remote control battery MUST BE PRESSED AGAIN, ALWAYS must be replaced as soon as possible. WITHIN 1.5 M FROM THE VEHICLE. AFTER APPROXIMATELY 50 METERS OF VEHICLE RUNNING, AND FOR If the remote control battery is partially THE FOLLOWING 1000 METRES, THE charged, the user is warned in the following SYSTEM CHECKS THE PRESENCE...

  • Page 38: Remote Control Battery Replacement

    PASSIVE RECOGNITION STARTING THE VEHICLE IS ALSO POSSIBLE BY PLACING THE TAG WITH INTEGRATED TRANSPONDER IN THE SAME POSITION. • Insert a lever in the appropriate slot Remote control battery and uncouple the two half-shells of the replacement • With remote control (or,...

  • Page 39: Usb Port

    CURRENTLY AVAILABLE MARKET. The USB socket is active when the starter switch is turned to the "ON" position. Opening saddle with remote USB port control to access helmet On vehicles with this feature, a USB port A compartment is situated inside the glove compartment, on the left hand side.

  • Page 40: Saddle Opening

    Lift the saddle and tip it forwards. Front glove-box opening Bag hook Saddle opening With the ignition switch in the «ON» position, The bag hook is placed on the saddle end. press to open the front case hatch. With the engine running, and the starter To use the hook, slide it off from the front.

  • Page 41: The Identification

    FOR USER SAFETY, THE DIMENSIONS Frame number OF THE LOAD SHOULD NOT EXTEND To locate and read the frame number: BEYOND THE VEHICLE PERIMETER - lift the saddle; OR HAMPER RIDING IN ANY WAY. - lift the helmet compartment by removing it. The identification identification registration...

  • Page 43: Use

    VESPA PRIMAVERA TECH ELETTRICA CHAPTER 03...

  • Page 44: Riding Modes

    "PRESS BRIEFLY AND RELEASE": Riding modes PRESS THE BUTTON AND RELEASE WITHIN 0.5 SECONDS; This vehicle is equipped with an electric "PRESS AND HOLD": PRESS AND motor powered by a specific traction battery. HOLD THE BUTTON FOR AT LEAST 2 To enable starting, after turning the starter SECONDS switch to ON, one of the three riding modes...
  • Page 45 All modes except for reverse, which is RANGE only intended to assist small manoeuvred for parking, may also be selected while Range varies depending on the riding style the vehicle is moving with the procedure of the user. The riding style is represented AVOID PARKING UNEVEN...

  • Page 46: Charging From Mains Power

    * In case of high temperatures of the traction battery caused by high ambient temperatures or immediately after battery recharge, or due to prolonged driving conditions uphill or at full power, the maximum speed may be reduced compared to the nominal speed. ** In both riding modes (POWER and ECO), when the traction battery charge state reaches 10%, the system gradually reduces the maximum speed from 67 km/h (or from 40 km/h in ECO mode) to 30 km/h, until the charge state reaches 7%.
  • Page 47 RUB AGAINST PAINTWORK, CAUSING WARNING DAMAGE TO THE CABLE ITSELF AND/ OR TO THE VEHICLE. The plug fitted on the charging cable of THERE CLAMP this vehicle complies with the standard RECHARGE CABLE THAT DEFINES IEC-61851-62196 for charging from public THE MAXIMUM LENGTH LIMIT.
  • Page 48 Charging plugs Country Type of charging plug Adapter ITALY Built-in 3A Scame plug Schuko electric adapter provided, only for private use Integrated BS1363/A plug with retaining ring 3A electrical ADAPTER provided EUROPE Integrated Schuko plug with retaining ring No electric adapter provided USA - CAN Integrated NEMA 5-15 3A electrical ADAPTER provided...
  • Page 49 BATTERY COMPLETELY AT LEAST ONCE EVERY THREE (3) MONTHS. The introduction of the European Directive CHARGE TRACTION 2014/94/EU provides the labelling for new BATTERY, USE A PUBLIC CHARGING electric vehicles and for all charging stations STATION FOR ELECTRIC VEHICLES in order to allow vehicle drivers to more OR CONNECT THE VEHICLE TO A appropriately select the recharge option HOUSEHOLD MAINS POWER SOCKET...
  • Page 50 DURING THE CHARGE-DISCHARGE YOU HAVE FINISHED USING THE CYCLES. VEHICLE FOR THE DAY. AT BATTERY TEMPERATURES ABOVE 0°C, THE TRACTION BATTERY ALSO NORMAL CHARGE CYCLE TO 100% CHARGES THE ANCILLARY BATTERY STATE OF CHARGE IS PERFORMED WHEN CHARGING FROM MAINS (NORMAL CHARGE), WHEREAS AT DURING RECHARGE...
  • Page 51 ELECTRICITY GRID FREQUENCY IS 60Hz, THE RECHARGE WITH THE PLUG INSERTED MAY START AFTER A FEW MINUTES. (Vehicle Management System) WARNING WARNING cooling fan A quiet whistling noise and/or vibration produced by the electric motor or by the VMS cooling fan, situated under the WHEN STOWING THE CHARGING THE CHARGING CABLE COVER IS footboard of the vehicle, are normal while...
  • Page 52 positioned, the vehicle can still be started as follows: • Turn the starter switch to 'ON'; the THE VEHICLE IS EQUIPPED WITH "cable not stowed" icon will light up on ELECTRIC COOLING the digital display. SITUATED UNDER THE FOOTBOARD WHICH IS ACTIVATED WHEN THE VEHICLE CHARGED.

  • Page 53: Controls

    T = Temperature * = Slow charge to only partial capacity VEHICLE PARKED FOR A FEW HOURS/DAYS SINCE LAST USE ("COLD" BATTERY) Ambient T < -10°C -10°C < T < 0°C 0°C < T < 30°C 30°C < T < 40°C T >...

  • Page 54: Engine Stop

    ATTENTION RIDING THE VEHICLE WHEN THE SPRING PRE-LOAD HAS NOT BEEN SET-UP CORRECTLY FOR THE RIDER, AND THE POTENTIAL LOAD, COULD REDUCE THE COMFORT OF THE Stand RIDE AND THE PRECISION OF THE WARNING STEERING. Centre stand Grip the hand grip with your left hand and grip the rear grab handle of the saddle with ATTENTION your right hand.

  • Page 55: Safe Riding

    THE SIDE STAND IS DESIGNED TO SUPPORT THE VEHICLE WEIGHT, IT IS NOT SUITABLE TO ALSO SUPPORT THE RIDER OR PASSENGER WEIGHT. ATTENTION NEVER SIDE STAND WARNING VEHICLE CARRYING BAGGAGE OR WITH ANY LOADS CARRIED ON THE BAG HOLDER HOOK, AND NEVER USE THE SIDE PARK THE MOTORCYCLE ON SAFE STAND TO SUPPORT THE VEHICLE AND LEVEL GROUND.
  • Page 56 them again. When riding under conditions like this, you should brake periodically. 4. Do not brake hard on a wet, unsurfaced or slippery road. 5. Do not start off by getting on the vehicle while it is standing on its stand. In any case, the rear wheel should not be turning when it comes into contact with the ground, in order to avoid losing control.
  • Page 57 LONG, STEEP DESCENTS, ATTENTION AVOID OVERHEATING THE BRAKE SYSTEM, REPEATED PROLONGED BRAKE APPLICATION IS RECOMMENDED TO REDUCE SPEED. IN THE EVENT OF OVERHEATING, THE DO NOT ADJUST THE MIRRORS WHILE RIDING. THIS COULD CAUSE VEHICLE MUST BE STOPPED AND YOU TO LOSE CONTROL OF THE THE BRAKE SYSTEM COOLED.

  • Page 59: Maintenance

    VESPA PRIMAVERA TECH ELETTRICA CHAPTER 04 Maintenance...

  • Page 60: Hub Oil Level

    Hub oil level Check that the oil level in the hub is correct THE OTHER NOTCHES ON THE HUB at the intervals specified in the scheduled OIL DIPSTICK ARE APPLICABLE FOR maintenance table. OTHER MODELS AND HAVE NO FUNCTION ON THIS VEHICLE. WARNING THE FUNCTION OF THE HUB WITH INSUFFICIENT HUB LUBRICATION OR...

  • Page 61: Tyres

    - check the fluid level through the related ENVIRONMENT AND IN COMPLIANCE TYRE WEAR AND RENDERS DRIVING inspection windows "A": WITH LEGAL REGULATIONS. DANGEROUS. • if the window is full, the brake fluid is TYRES MUST BE REPLACED WHEN correct. THE TREAD REACHES THE WEAR Tyres LIMITS ESTABLISHED BY THE LAW.

  • Page 62: Battery

    - Unscrew the four screws «A» and remove USE, BATTERIES the rubber cover placed at the centre of the MUST BE PERIODICALLY CHARGED footrest. (APPROXIMATELY ONCE EVERY ONLY USE DOT 4-CLASSIFIED BRAKE THREE MONTHS) BY CONNECTING FLUID. BRAKE CIRCUIT FLUID IS CHARGE CABLE SITUATED...

  • Page 63: Installing A New Battery

    the engine in working order as well as the battery. • Store the vehicle with the ancillary DO NOT REVERSE THE POLARITY: IN ORDER TO AVOID DAMAGING battery removed. The battery must be RISK SHORT CIRCUIT THE ELECTRICAL SYSTEM, NEVER cleaned, fully charged and kept in a dry, DAMAGE ELECTRICAL...

  • Page 64: Fuses

    MAKE SURE LEADS AUTOMATICALLY STOPS CHARGING COMPLIANT WITH APPLICABLE CORRECTLY CONNECTED TO THE ONCE TRACTION BATTERY STANDARDS AND EQUIPPED WITH TERMINALS. REACHES 100% CHARGE. IN ORDER AN EARTH CONNECTION AND A TO CHARGE THE TRACTION BATTERY DIFFERENTIAL CIRCUIT BREAKER. AGAIN, PLUG MUST DISCONNECTED FROM THE MAINS...
  • Page 65 DESCRIPTION / FUNCTION VALUE MODIFICATIONS OR REPAIRS TO THE Fuse No. 10 Capacity: 15A ELECTRICAL SYSTEM, PERFORMED Power feed: battery INCORRECTLY OR WITHOUT STRICT ATTENTION TECHNICAL Protected circuits: SPECIFICATIONS OF THE SYSTEM fuses CAN CAUSE MALFUNCTIONING AND 3, and 4, starter RISK OF FIRE.

  • Page 66: Bulbs

    (blinker), Power feed: Fuse diagnosis socket. front rear No. 10 turn indicators, VMP (Vespa Multimedia Protected circuits: Bulbs instrument panel. Platform), horn button, horn, anti- This section lists the bulb types required for theft preparation. the vehicle's equipment Fuse No.

  • Page 67: Front Light Cluster

    OR TO LOW TEMPERATURES; AND IS DESCRIPTION / FUNCTION NOT A DEFECT. VALUE PRESENCE DROPS Licence plate light Type: incandescent WATER, OTHER HAND, bulb COULD INDICATE THAT WATER Power: 12V - 5W INFILTRATING. CONTACT Quantity: 1 DEALERSHIP OR AN AUTHORISED SERVICE CENTRE.

  • Page 68: Front Turn Indicators

    onto the screen is not higher than REGULATIONS IN FORCE IN EVERY Courtesy lights 9/10 or lower than 7/10 of the distance COUNTRY WHERE THE VEHICLE IS The courtesy lights are of 'LED' type. In between the centre of the headlight and USED.

  • Page 69: Rear Turn Indicators

    Number plate light DO NOT PULL THE ELECTRICAL CABLES WHEN TAKING OUT THE BULB HOLDER. To remove the licence plate light proceed as follows: Rear-view mirrors Undo the two screws "A" and remove the WHENEVER ON INTERNAL SURFACE cover "B". HEADLIGHT MISTING The mirrors can be set to the desired...

  • Page 70: Front Disc Brake

    OR REAR BRAKING SYSTEM DURING OPERATION, ADVISABLE TO HAVE THE BRAKING SYSTEM DO NOT ADJUST THE MIRRORS CHECKED BY A DEALERSHIP OR WHILE RIDING. THIS COULD CAUSE AN AUTHORISED SERVICE CENTRE. YOU TO LOSE CONTROL OF THE AFTER REPLACING BRAKE VEHICLE.

  • Page 71: Rear Drum Brake

    inner tubes - go flat very slowly, resulting in in a car body shampoo and water solution Rear drum brake a greater steering safety. (2-4% of car shampoo in water). Then rinse Operate adjusting nut "B" and loosen lock with abundant water, and dry with a chamois In the event of a puncture, you can make nut "A"...
  • Page 72 SUMMER WHEN THE BODYWORK IS STILL HOT AS THE SHAMPOO COULD DAMAGE THE PAINTWORK • PREVENT DEPOSITS FROM IF IT DRIES BEFORE BEING RINSED DURING VEHICLE CLEANING, WITH REMAINING ON THE BODYWORK, OFF. NEVER USE CLOTHS SOAKED WATER JET UNDER PRESSURE, KEEP INDUSTRIAL POLLUTANT IN ALCOHOL, PETROL, DIESEL OIL...

  • Page 73: Troubleshooting

    DO NOT USE SILICON WAX OR IGNITION DIFFICULTIES POLISHING AGENTS; or an Authorised ALCOHOL Service Centre. CLEANING; Flat battery Recharge IT IS STRONGLY RECOMMENDED TO battery MANUALLY WASH WITH SPONGE AND NEUTRAL SHAMPOO, AVOIDING EXCESSIVE RUBBING THAT COULD IRREGULAR POWER DELIVERY AFFECT THE HAZE DEGREE OF THE WHEN RIDING PAINTING;...
  • Page 74 STAND DOES NOT RETURN TO POSITION Presence of dirt Clean and grease...

  • Page 75: Technical Data

    VESPA PRIMAVERA TECH ELETTRICA CHAPTER 05 Technical data...

  • Page 76: Data

    Data VEHICLE INFORMATION FUNCTION DESCRIPTION / VALUE Chassis Stamped steel metal sheet with welded structural reinforcements.
  • Page 77 FUNCTION DESCRIPTION / VALUE Front suspension Single-arm suspension with helical spring and double effect hydraulic single shock absorber. Rear suspension Double-acting shock absorber, adjustable to four positions at pre- loading. Front brake Ø 200 mm hydraulically operated disc brake controlled from RH handlebar lever.
  • Page 78 FUNCTION DESCRIPTION / VALUE Electric Motor Continuous motor power 3.6 kW (4 kW peak) Riding modes Sport, Eco, Reverse Maximum speed 67 km/h (40 km/h in "Eco" mode) Range (*) Up to 100 km in “Eco” mode / Up to 70 km in “Power” mode Maximum gradient (**) Up to 30% (with rider only, weighing 75 Kg) Up to 20% (rider and passenger, weighing 75 Kg each).
  • Page 79 SPEED / RANGE RIDING MODE CHARGE STATE MAXIMUM SPEED Km/h (mph) REMAINING LIFE km (miles) POWER from 100% to 12% 67 (41.6) * 70 (43.5) POWER from 12% to 7%** from 67 (41.6) to 30 (18.6) * 70 (43.5) POWER from 7% to 0% 30 (18.6) 70 (43.5)
  • Page 80 VEHICLE PARKED FOR A FEW HOURS/DAYS SINCE LAST USE ("COLD" BATTERY) Ambient T < -10°C -10°C < T < 0°C 0°C < T < 30°C 30°C < T < 40°C T > 40°C temperature range Estimated Charging 6 hours * 4,5 hours 5 hours Charging...

  • Page 81: Toolkit

    All the radio frequency devices installed on this vehicle by the constructor are compliant with EU Directive 2014/53/EU (also known as the RED directive). The relative homologation documents are available at the following web address: redhomologation.piaggiogroup.com Toolkit The toolkit comprises: •...

  • Page 83: Spare Parts And Accessories

    VESPA PRIMAVERA TECH ELETTRICA CHAPTER 06 Spare parts and accessories...

  • Page 84: Warnings

    ARE APPROVED FOR USE WITH Warnings PIAGGIO VEHICLES AND COVERED PIAGGIO WARRANTY. THEREFORE ESSENTIAL CONTACT A DEALERSHIP OR AN AUTHORISED SERVICE CENTRE IN ORDER CHOOSE ACCESSORIES CORRECTLY. USING NON-ORIGINAL ACCESSORIES MAY AFFECT THE STABILITY AND FUNCTIONS YOUR VEHICLE, COMPROMISING THE SAFETY OF THE VEHICLE AND EXPOSING THE RIDER WARNING TO DANGER.

  • Page 85: Scheduled Maintenance

    VESPA PRIMAVERA TECH ELETTRICA CHAPTER 07 Scheduled maintenance...

  • Page 86: The Value Of Service

    Any minor faults should be reported original Vespa spare parts are essential without delay to a Dealership or an factors for the reliability of your vehicle! Authorised Service Centre without waiting until the next scheduled service.
  • Page 87 Km x 1000 (mi x 1 (0.6) 5 (3.1) 10 (6.2) 15 (9.3) 20 (12.4) 25 (15.5) 30 (18.6) 1000) MONTHS MONTHS MONTHS MONTHS Electrical system Brake system Braking system - Adjusting the rear drum brake Brake fluid (3) Hub oil Headlight direction adjustment Brake pads...

  • Page 88: Recommended Products

    • (2) Diagnosis and electronic systems update: VMS (Vehicle Management System); DSB (Dashboard Management System); VMP * (Vespa Multimedia Platform) • (3) CAUTION: failure to do so may result in a complete loss of the brake system functionality • * : if present AT EACH SCHEDULED SERVICE, USE THE DIAGNOSTIC TOOL TO CHECK FOR ERRORS AND CHECK THAT ALL PARAMETERS ARE CORRECT.
  • Page 89 PRODUCT DESCRIPTION SPECIFICATIONS R.I.D./A.D.R. 2 10°b) 2 R.I.Na. 2.42 - I.A.T.A. Water repellent pouring calcium spray Water repellent spray grease 2 - I.M.D.G. class 2 UN 1950 Pag. 9022 EM grease. 25-89...
  • Page 92 The descriptions and images in this technical publication are given for illustrative purposes only. Piaggio & C. S.p.A. reserves the right to modify the components and accessories of its products, without altering the essential characteristics of the product described and illustrated herein, to make any changes to organs, details or supplies, deemed appropriate for the purpose of improvement, or for any other requirement of a technical or commercial nature, at any time, without undertaking to promptly update this publication.

Table of Contents