Hunter 20179 Owner's Manual And Installation Manual page 13

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-5. First install B10 candelabra bulbs (60
Watt Maximum) into the
sockets.
7-6. Thread the light and fan pull chains
through the hole in the center of the
glass bowl. Then, thread the light pull
chain through the hole in the center
of the cover plate.
7-7. Thread the fan pull chain through the
grommet hole in the side of the cover
plate.
7-8. Place the cover plate up against the
glass bowl. Align the holes in the
cover plate and glass bowl.
7-9. Thread the light pull chain through
the finial and screw the finial onto the threaded rod end until tight.
7-10. Attach the extra pull chains (included) to the light and fan pull
chains using the plastic breakaway connector. (You may find the
plastic breakaway connector on the
end of the extra chain.)
Note: In compliance with US federal energy regulations, this
ceiling fan contains a device that restricts its light output.
Exceeding the wattage limit marked on the MAX wattage
sticker affixed to the light socket(s) may result in fire hazard
or improper operation.
13 13
42676-01 • 04/04/11 • Hunter Fan Company
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial