Download Print this page

muuto MIDST CONFERENCE TABLE 395 CM / 460 CM Manual

Hide thumbs Also See for MIDST CONFERENCE TABLE 395 CM / 460 CM:

Advertisement

Quick Links

MIDST
CO N FEREN CE TABLE
395 CM / 460 CM
— TAF Studio

Advertisement

loading
Need help?

Need help?

Do you have a question about the MIDST CONFERENCE TABLE 395 CM / 460 CM and is the answer not in the manual?

Questions and answers

Summary of Contents for muuto MIDST CONFERENCE TABLE 395 CM / 460 CM

  • Page 1 MIDST CO N FEREN CE TABLE 395 CM / 460 CM — TAF Studio...
  • Page 2 CONTENT — INDHOLD — INHALT — CONTENU — CONTENIDO ASSEMBLY INSTRUCTION — SAMLEMANUAL — MONTAGEANLEITUNG INSTRUCTIONS DE MONTAGE — INSTRUCCIONES DE MONTAJE 395cm Tabletop Length Tabletop Screws x2 Conference 48 pcs Table Base M8 x 16mm x4 Support Support Profile Profiles Mounting screws 1730mm...
  • Page 3 Connect the 2nd support profile to the bracket using the 4 remaining screws. Ensure the screws are fully tightened and secure. Place and screw the support profiles to the bases. M5 x 6mm 8pcs M6 x 8mm...
  • Page 4 It is okay when the support profiles are connected to the bases that they are slightly angled upwards. Place the tabletop carefully so the 4 x screw heads sit within the holes of the tabletop. Dragging the tabletop will scratch the underside. The tabletop should sit flush on the support brackets.
  • Page 5 Tabletop Connectors Place the round fitting into the circular cutout under the table so Secure the tabletop by placing the arrow and larger hole are are a few tabletop screws facing in the same direction and Do not over tighten. towards the center of the tabletop.
  • Page 6 Connect the threaded pin to the dowel in the tabletop. Turn completely until tight. Place one of the metal dowel pins through the tabletop into the round fitting. Use the key provided to tighten the dowel pin. It should retract into the tabletop with each turn.
  • Page 7 Place the other half of the tabletop onto the support Now push the tabletop half together so they are as close as possible. profiles and push towards the pins at an angle. Keep the tabletop half slightly elevated in the opposite end. Do not completely push the tabletop together but enough so the dowel pins are within the tabletop.
  • Page 8 Any spill should immediately be removed to avoid discolouring. Clean the table top often and carefully with a soft and dry cloth. *Muuto recommends that you contact your local hardware store to get advice on tabletop oils for indoor use.
  • Page 9 *Muuto recommande de contacter votre quincaillerie locale pour obtenir des conseils sur les huiles pour plateau de table destinées à une utilisation en intérieur.