Midea MRT21D2BST User Manual page 22

Problem
Door seal fails to be
tight
Hot housing
EN
Surface
condensation
Abnormal noise
Possible reason
• Remove foreign matters on the door seal
• Heat the door seal and then cool it for restoration (or blow it
with an electrical drier or use a hot towel for heating)
• There is too much food in the chamber or food stored
contains too much water,resulting in heavy defrosting
• The doors are not closed properly, resulting in frosting due to
entry of air and increased water due to defrosting
• Heat dissipation of the built-in condenser via the housing,
which is normal when housing becomes hot due to high
ambient temperature, storage of too much food or shutdown
of the compressor is shut down, provide sound ventilation to
facilitate heat dissipation
• Condensation on the exterior surface and door seals of the
refrigerator is normal when the ambient humidity is too high.
Just wipe the condensate with a clean towel.
• Buzz: The compressor may produce buzzes during operation,
and the buzzes are loud particularly upon start or stop. This is
normal.
•
produce creak, which is normal.
18
IF
1.
2.
In
If o
de
Mid
one
info
Con
NO
This
resp
1. P
2. R
3. P
w
4. P
f
5. E
6. D
YOU
REP
serv
and
date