Advertisement

Quick Links

Technical Support and E-Warranty Certificate
www.vevor.com/support
INDUCTION COOKTOP
Model:LI4-26
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to cover
all categories of tools offered by us. You are kindly reminded to verify carefully
when you are placing an order with us if you are actually Saving
Half in comparison with the top major brands.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LI4-26 and is the answer not in the manual?

Questions and answers

Summary of Contents for VEVOR LI4-26

  • Page 1 Technical Support and E-Warranty Certificate www.vevor.com/support INDUCTION COOKTOP Model:LI4-26 We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
  • Page 2 This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if...
  • Page 3: Important Safety Information

    Warning: To reduce the risk of injury, the user must read the instructions manual carefully. MODEL AND PARAMETERS Model LI4-26 Voltage/Frequency 220-240V / 50Hz Power (total) 6000W Control mode Touch Built in size 560x490 mm Product size 590x520 mm Notice: the ceramic plate is hot after cooking, please do not touch! WARNING •...
  • Page 4: Warning And Safety Instructions

    suitably qualified person, in accordance with the manufacturer’s instructions, and must be connected in accordance with all local electrical rules specification. • The use of this appliance for any other purpose or in any other environment will void warranty. • Your new appliance is guaranteed against electrical or mechanical defects, subject to certain exclusions, the foregoing does not affect your statutory rights.
  • Page 5 top. The saucepans must be positioned exactly on these zones for efficient heating to occur. Pans should have the same diameter as the cooking zone that they are being used on. • You should not use saucepans with rough bottoms, as this can scratch the ceramic surface.
  • Page 6: Child Safety

    Maintenance” section to avoid possible hazards. • Use only hob guards designed by the manufacturer of the cooking appliance or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob guards incorporated in the appliance. The use of inappropriate guards can cause accidents.
  • Page 7: Installation

    INSTALLATION The installation must be carried out by a suitably qualified person, in compliance with local electrical and building rules and specifications, and the instructions outlined in this manual. IMPORTANT: • Ensure that the appliance is installed in a suitable position, in consideration to adjacent walls, cupboards and protection for combustible materials in accordance with local rules.
  • Page 8 • Under any circumstances, make sure the hob is well ventilated and the air inlet and outlet are not blocked. Ensure the hob is in good work state. As shown below. Note: The safety distance between the hotplate and the cupboard above the hotplate should be at least 760mm.
  • Page 9: Connection To Power Supply

    Cautions • The induction hotplate must be installed by qualified personnel or technicians. Please never conduct the operation by yourself. • The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer,as the humidity may damage the hob electronics.
  • Page 10: Before Use

    Electric induction stove failure, please contact us: Customer Service Email: CustomerService@vevor.com (Please send relevant videos and pictures to our email address, and attach your Amazon order number. After confirming the problem, we will definitely give you a satisfactory solution.) BEFORE USE IMPORTANT: The cooking zones will not switch on if pots are not the right size.
  • Page 11: Existing Pots And Pans

    Existing pots and pans Use a magnet to check if the pot is suitable for the induction hob: pots and pans are unsuitable if not magnetically detectable. • Make sure pots have a smooth bottom, otherwise they could scratch the hob. Check dishes.
  • Page 12 • Always lift pans off the ceramic hob – do not slide, or they may scratch the glass. DIAGRAM OF THE RADIANT HOB INDUCTION HOB CONTROL PANEL TIMER: Set the time as required LEFT REAR BURNER: Select the left up zone...
  • Page 13 LEFT FRONT BURNER: Select the left down zone RIGHT REAR BURNER: Select the right up zone RIGHT FRONT BURNER: Select the right down zone NUMBER KEYS: Touch to adjust the power or time ON/OFF: Turn on or off the hob CHILD LOCK: Press 2 or 3 seconds once to lock the appliance.
  • Page 14: Residual Heat Indicator

    up zone down zone Right Right Power of each burner Left up zone up to max.1200W. Left down zone up to max.1800W. Right up zone up to max. 1800W. Right down zone up to max. 1200W. Setting the heating zone power level After selecting the heating zone, the indicator next to the zone will flash “--”...
  • Page 15: Setting The Timer

    Setting the timer Touch the heating zone selection control that you want to set the timer for. 1. After selecting the heating zone, touch the timer button , the LED nearby the timer button will start flashing and show the time “00”. 2.
  • Page 16: Auto Switch Off

    • If any cracks appear in the glass surface, immediately disconnect it from the power. Do not use any part of the cooktop until a new glass surface has been fitted. Auto switch off The hob will automatically switch off when you did not set cooking time, forgot to switch off the hob, and did not operate the hob at all.
  • Page 17: Cleaning And Maintenance

    Error Possible Cause Remedy code No proper cookware Place on the proper pan. Contact the Customer NTC short or open Service please. Contact the Customer High voltage Service please. Contact the Customer Low voltage Service please. • CC/CCC automatic safety shut-off for liquid overflow. This means that the touch panel was watered with liquid.
  • Page 18 any cleaning process. • Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator (“H”) is not displayed. IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass. Cleaning the induction hob top •...
  • Page 19: Correct Disposal

    If sugar (or sugary matter) or plastic is accidentally burnt on the cooktop, remove at once with the scraper while still hot. Otherwise it may leave a permanent mark. Do not use the cooktop as a work surface. Be particularly careful with dirt or dust from vegetables, cleaning powders, etc.
  • Page 20 Technical Support and E-Warranty Certificate www.vevor.com/support...

Table of Contents