Primadonna Aromatic Contents 1 DESCRIPTION OF PRODUCTS 1.1 Description of the machine 1.2 Description of panel and homepage 1.3 Description of accessories* 1.4 Description of milk carafe 2 USING THE MACHINE FIRST TIME 2.1 Procedure for first power-up 2.2 Check the water hardness 2.3 Setting water hardness 2.4 Installing the water filter 2.5 Introduction to the features of the machine...
Page 3
4.1.2 Customization of hot coffee drinks 4.1.3 Using pre-ground coffee for hot coffee drinks 4.1.4 Coffee pot 4.2 Cold Brew and Over Ice coffee drinks 4.2.1 Direct selection of Cold Brew and Over Ice coffee drinks 4.2.2 Customization of cold coffee drinks (Cold Brew and Over Ice) 4.2.3 Use of pre-ground coffee in cold coffee drinks (Over Ice only) 4.2.4 Cold Brew carafe 4.3 Drinks with hot milk...
Page 4
5.6 Cleaning the carafe 5.7 Drain the circuit 5.8 Auto-off 5.9 Beep 5.10 Energy saving 5.11 Languages 5.12 Coffee temperature 5.13 Grinder settings 5.14 Water hardness 5.15 Default values 5.16 Support (QR code) 5.17 Carafe tips 5.18 Creative recipes 5.19 Statistics 5.20 More information 6 CLEANING AND MAINTENANCE 6.1 Cleaning removable parts...
Page 5
6.6 Deep cleaning of the machine 6.6.1 Deep cleaning of the machine 6.6.2 Cleaning the removable brewing unit 6.6.3 Descaling 6.6.4 Management of water filter 6.6.4.1 Installing the water filter 6.6.4.2 Replacing the water filter 7 FREQUENT PROMPTS AND ALARM MESSAGES 7.1 Messages regarding the water tank and the coffee grounds container 7.2 Messages regarding the water filter 7.3 Messages regarding coffee beans and pre-ground coffee...
Primadonna Aromatic 1 DESCRIPTION OF PRODUCTS 1.1 Description of the machine Bean hopper with lid and seal Lid covering accessories/pre-ground coffee compartment Drinks spout (height-adjustable) Spout cover release button Flap covering milk carafe connector/service water spout Drip tray Power cord Water tank with lid Control panel A10.
Page 7
A12. Grounds container A13. Grounds container support A14. Cup tray A15. Drip tray grille A16. Drip tray water level indicator A17. Brewing unit access flap (accessible when water tank is removed) A18. Brewing unit housing A19. Removable brewing unit A20. Condensate tray A21.
1.3 Description of accessories* * Accessories: number and type differ according to model INSIDE THE MACHINE ACCESSORIES COMPARTMENT Pre-ground coffee scoop/brush Service/cleaning water spout (keep the spout in a safe place after each use) Removable pre-ground coffee funnel IN THE ACCESSORIES PACK Ice tray "Water Hardness Test"...
Primadonna Aromatic 2 USING THE MACHINE FIRST TIME 2.1 Procedure for first power-up Please note: When used for the first time, all removable accessories that make contact with water or milk (milk carafe, water tank, etc...) should be rinsed with hot water. For best results, wash the milk carafe in a dishwasher. 1.
and reposition it in the machine. 8. Take the service/cleaning water spout (D2) from the accessories pack (fig. 5). 9. Push upwards on the connector cover flap (A5) and attach the ser- vice/cleaning water spout (D2) to the milk carafe/water spout con- nector (fig.
17. Remove the strip from the water and shake lightly. Press “→”. After about a minute, 1, 2, 3, or 4 red squares will appear, depending on the hardness of the water. Each square corresponds to 1 level; 2.3 Setting water hardness 18.
24. Remove the water tank (A8) from the machine and fill with fresh drinking water; remove the lid of the tank and immerse the filter in the water, while squeezing the middle section 2 or 3 times so that the air bubbles can escape (fig. 11). Press “→” to pass on to the next step.
Primadonna Aromatic 3 HOW TO USE YOUR MACHINE 0,5 s 3.1 Turning on and turning off 3.1.1 Turning on Please note: Each time the machine is turned on, to ensure drinks will be made at just the right temperature, it carries out an automatic preheat and rinse cycle that cannot be interrupted.
3.1.3 Switching off for extended periods If the machine is not going to be used for any length of time (e.g. holi- days, periods of absence), follow the directions under the heading “ Drain the circuit”. If the machine will not be used for a few days, proceed as follows: 1.
3.2 Homepage and external buttons 3.2.1 Introduction to homepage This display is designed to give you all the information you need at any given moment of your day. Navigating with ease through this generous offering of drinks and infor- mation is crucial, which is why we have included certain features that will be of great help to you.
3.2.1.3 Settings, notifications and indicators The area at the top right of the display shows certain useful information regarding the daily use of your machine, as well as the time, and the icon that accesses the settings menu (C6): • A symbol (C4) at the top centre warns that the tubes inside the...
Page 19
• add a new profile; • edit an existing profile; • delete an existing profile; To add add a new profile (possible as long as there are still less than 4 displayed): • tap the avatar circle at the top left of the homepage; •...
3.2.2 External buttons 3.2.2.1 On/Off The On/Off button is used to turn the electrical system of the machine on and off. For more information, see sections under heading "3.1 Turning on and turning off" regarding the machine. Having plugged the power cord into the mains socket and checked that the switch (A11) (fig.
3.2.2.4 Profiles As mentioned under the heading "3.2.1.5 Profile and background icon" up to 4 profiles can be created and managed in such a way as to access a customized view of every user's favourite drinks. Button (B4) is used to switch quickly from one profile to another: sim- ply tap the button as many times as is necessary to bring up the desired profile.
3.3 Connectivity 3.3.1 Activating the Wi-Fi connection Use this function to enable or disable connectivity. Proceed as follows: 1. Tap the symbol (C10) on the display; 2. Tap the field next to the relative item to activate the Wi-Fi connection, along with remote control (by way of the “My Coffee Lounge”...
Primadonna Aromatic 4 DRINKS As explained under the heading "3.2 Homepage and external buttons" above, this machine offers a great variety of different drinks. The following sections of the manual will provide you with all the infor- mation you need to prepare your drink, to customize it, and, in the case of milk-based drinks, to ensure you use the milk carafes correctly.
4.1 Hot coffee drinks You can use your machine to prepare a wide variety of hot coffee drinks: first select Hot (B2), then select the "Coffee" tab in the top part of the dis- play, as described previously under the heading "3.2.2 External buttons".
Page 25
prises multiple ingredients (e.g. coffee and water), a bar indicating the proportions. The dashboard on the right displays the various controls for customizing the drink. If the selected drink uses beans ground at the moment of brew- ing, a “Coffee beans” tab appears at the top of the screen. Please note Should you want to use pre-ground coffee, details can be found under the heading...
Please note • "Cancel": press to interrupt preparation completely and go back to the homepage, without saving the customization. • "Stop": when preparing drinks with multiple ingredients (e.g. Americano = coffee + hot water), press this button to terminate the delivery of the current ingredient and pass on to delivery of the next ingredient.
Important! Selecting Pre-ground, the screen changes and the option of altering the intensity setting is removed, since the intensity depends on the amount of pre-ground coffee introduced (which in any event must be no more than 1 level scoop). 4. Choose the preferred quantity: an updated estimate of the actual fluid amount will be shown at the top of the page.
Page 28
3. Having made sure there is sufficient water and coffee for prepara- tion of the drink, press "→"; 4. Procure a container of the appropriate capacity, no more than 14cm in height, and position it under the drinks spout (A3). Press “Deliver”;...
4.2 Cold Brew and Over Ice coffee drinks You can use your machine to prepare a wide variety of cold coffee drinks (Over Ice and Cold Brew): first select Cold (B3), then, if featured on your model of the machine, select the "Coffee" tab at the top of the display as described previously under the heading "3.2.2 External buttons".
3. Tap the image on the homepage that illustrates the desired cof- fee drink (e.g. Coffee). 4. Make the selection between “Ice” or “Extra ice”, in the case of "Over Ice" drinks, or between "Original" or "Intense" in the case of "Cold Brew”...
Page 31
The dashboard on the right displays the various controls for customizing the drink. If the selected drink uses beans ground at the moment of brew- ing, a “Coffee beans” tab appears at the top of the screen. Please note Should you want to use pre-ground coffee, details can be found under the heading "4.4.6 Using pre-ground coffee for drinks with cold milk".
Please note • "Cancel": press to interrupt preparation completely and go back to the homepage, without saving the customization. • "Stop": when preparing drinks with multiple ingredients (e.g. Americano = coffee + hot water), press this button to terminate the delivery of the current ingredient and pass on to delivery of the next ingredient.
8. Lift the lid (A2) of the accessories compartment (fig. 23); 9. Check that the pre-ground coffee funnel (D3) is in place and make sure it is not blocked; add one level scoop (D1) of pre-ground coffee (fig. 24) and press “Ok”; 10.
Page 34
8. With delivery ended, in the event that during step 1 the number of cups was changed, confirm with “Yes” to store the new settings, or press “No” to retain the previous parameters. You can also save them in your Coffee Routine by ticking the relative box. All the information you need on Coffee routines can be found under the heading "4.8.5 Coffee...
4.3 Drinks with hot milk When preparing hot drinks with milk you need to use the LatteCrema Hot carafe, identified by the black coloured carafe lid (E2). The next few headings give indications on the types of milk to use, on how to utilize and clean the carafe and, as in the case of coffee drinks, how to deliver and customize your hot milk-based drinks.
Cow's milk Whole ✓ (fat >3,5%) Semi-skimmed ✓ (fat between 1.5 and 1.8%) Skimmed ✓ (fat <0.5%) Vegetable drinks ✓ Soya ✓ Almond ✓ Oatmeal 4.3.2 Preparation and attachment of the “LatteCrema Hot” ca- rafe This heading explains how to prepare the LatteCrema Hot carafe for use. Remember to ensure that the milk is left out of the fridge for a short a time as possible so that it always stays at a temperature close to 5 °C, as explained under the...
Turn the froth adjustment dial (E1) to select the amount of milk froth that will be delivered when making milk based drinks. When selecting a drink, the display will suggest the appropriate position for setting the froth adjustment dial. Dial position Recommended for…...
Please note • Once all the hot milk drinks you wanted to prepare have been delivered, remember that the milk carafe needs cleaning as described under the heading "6.2.3.1 Cleaning the milk carafe after use". If there is still some milk left in the carafe, return it to the refrigerator;...
Page 39
A first box relating to the size/quantity of the drink presents a choice of different sizes (S, M, L, XL), and two functions: My (see heading “4.8.4 “My” function") and To Go (see heading Go). On selecting the preferred quantity, an updated estimate of the actual fluid amount will be shown at the top of the box.
Please note • "Cancel": press to interrupt preparation completely and go back to the homepage, without saving the customization. • "Stop": when preparing drinks with multiple ingredients (e.g. Cappuccino = milk + coffee), press this button to terminate the delivery of the current ingredient and pass on to delivery of the next ingredient.
Page 41
5. As the machine heats up and proceeds with preparation, set the level of froth by turning the adjustment dial (E1) to the position recommended on the display; 6. The machine proceeds with preparation and a description of each single step (water heating, delivery of coffee) appears on the display. Once the preparation has been completed, the machine is ready for use again.
Whole (fat >3,5%) Semi-skimmed (fat between 1.5 and 1.8%) Skimmed ✓ (fat <0.5%) ✓ Soya ✓ Almond ✓ Oatmeal 4.4.2 Preparation and attachment of the “LatteCrema Cool” ca- rafe This heading explains how to prepare the LatteCrema Cool carafe for use. Remember to ensure that the milk is left out of the fridge for a short a time as possible so that it always stays at a temperature close to 5 °C, as explained under the...
Please note If "Energy Saving" mode is enabled (see relative heading), there may be a few seconds delay before the drink is delivered. 4.4.3 Milk frothing with the “LatteCrema Cool” carafe The LatteCrema Cool carafe is designed to give 3 levels of froth, adapting perfectly to any drink you may have in mind.
Please note If "Energy Saving" mode is enabled (see relative heading), there may be a few seconds delay before the drink is delivered. 7. A description of each single step (grinding, preparation, delivery of coffee, delivery of milk) appears on the display; 8.
Page 46
The drink icon on the left is also a button that you can tap to bring up a short description of the selected drink and, if the drink comprises mul- tiple ingredients (e.g. coffee and milk), a bar indicating the proportions. The dashboard on the right displays the various controls for customizing the drink.
Please note Depending on your selection of "Ice" or "Extra Ice", and "Original" or "Intense", the machine will adjust the extraction parameters and sug- gest the correct amount of ice to use for optimum results.. Please note Once all the cold milk drinks you wanted to prepare have been deliv- ered, remember that the milk carafe needs cleaning as described under...
on the display, showing the parameters that can be customized according to preference; 3. Select the “Pre-ground” tab at the top right; 4. Choose the preferred quantity: an updated estimate of the actual fluid amount will be shown at the top of the page. Press “Start”; 5.
Please note • To stop delivery manually, press "Stop" or "Cancel". • At the end of delivery, to increase the quantity of coffee in the drink, simply press +Extra. When the required quantity has been reached, press "Stop” or “Cancel”. •...
Please note: • To stop delivery manually, press "Stop" or "Cancel". • At the end of delivery, to increase the quantity of liquid in the cup, press "+Extra" When the required quantity has been reached, press "Stop” or “Cancel”. 4.7 Tips for a Perfect coffee 1.
4.8 Additional features 4.8.1 Extra shot Give a boost to the following drinks by adding an Espresso ristretto ml): Espresso Cappuccino Mix Espresso lungo Cortado Filter style Flat White Coffee Doppio+ Americano Long Black Cappuccino Verlängerter Cappuccino+ Café con leche Latte Macchiato Café...
4.8.2 To Go The “To Go” function is ideal for anyone who may want to create a cus- tomized take-away drink . Search the delonghi.com website to find the recommended travel mug for your machine: Travel mug (not included) (capacity 235ml)
Page 53
If the intention is to prepare a drink with milk, follow the instruc- tions given under headings “4.3.2 Preparation and attachment of the “LatteCrema Hot” carafe” “4.4.2 Preparation and attachment of the “LatteCrema Cool” carafe”; Tap the customization bar at the bottom of the image illustrating the desired drink (e.g.
Page 54
Please note: • If saved, the new settings will be stored ONLY in the selected profile. • Each time a different mug is used, it is advisable to stay close to the machine to check the amount of liquid effectively dispensed. •...
4.8.3 Bean adapt technology A coffee expert at your fingertips that helps you, in a few short steps, to optimize the brewing of your coffee and the way it tastes in the cup. Smart technology guides you through adjustment and operation of the machine, according to the selected coffee beans: from grinding to brew- ing, each step will be controlled to get the best from any coffee bean.
Please note • Bean Adapt Technology will be visible as an intensity setting for espresso coffee only, but will improve the brewing results for all other coffee based drinks as well. • Up to 6 different bean profiles can be stored: every time you change the type of beans used in the machine, simply tap the Bean Adapt tab (C3)
Page 57
9. If the drink comprises another ingredient, a new progress bar will appear on the screen, similar to the first described above, and all you have to do is repeat the same procedure for this second ingre- dient. At the conclusion of this second cycle, the “My”...
4.8.5 Coffee Routines With this function the machine will remember how you like your coffee at different times through the day and update the list of drinks to match your preferences. As long as the function is active, whenever the settings (quantity, inten- sity, etc.) for any given drink are changed, the machine will give you the option of saving the new settings, for that particular period during the day, by ticking the dedicated box and then confirming with 'Yes' .
4. Otherwise, press “X” to go back and to return to the homepage. 5.3 Water filter To ensure the performance of the machine remains constant over time, it is advisable to install a De’Longhi water softener filter (D8). For further information, visit www.delonghi.com. EAN: 8004399327252 1. Press button (C6).
3. Press "Start" and follow the guided procedure; The instructions are also given under the heading "2.4 Installing the water filter". 4. Otherwise, press “X” to go back and to return to the homepage. 5.4 Cleaning the machine To give the nozzles of the drinks spout (A22 and A23) and the removable brewing unit...
1. Press button (C6). 2. Press “Clean carafe”. 3. Press "Start" and follow the guided procedure using the scroll ar- rows “←” or “→”. At the end of the procedure, press “Done” to confirm that cleaning is finished and go back to the homepage. 4.
4. The display will show the auto-off time currently selected and the other options that are available. 5. Select the desired auto-off time and press “Ok” to save. 6. Press “X” to go back to the homepage. Please note: The auto-off time used by the machine is factory-set to a low value, so as to minimize energy consumption.
5.12 Coffee temperature Temperature is one of the main factors in determining a good coffee brew. The lighter the roast, the higher the temperature the coffee can withstand, and vice versa. Which is why we recommend using the Bean Adapt function to ensure the ideal temperature setting for the bean being used.
10. Press “X” to go back to the homepage. Please note: • After completing the above procedure, at least 5 coffees should be prepared and delivered before making any further adjustment to the coffee grinder. If the coffee is still not being delivered correctly by the machine, repeat the procedure.
5.15 Default values This function resets all menu settings and all user customizations, restor- ing the factory default values (with the exception of the language, which remains as set, and the statistics). 1. Press the button (C6). 2. Select “General settings” on the screen. 3.
With the My Coffee Lounge App, you have access at any given moment to more than 150 creative recipes using espresso, cold brew, cappuccino, latte macchiato, etc... In this section, you will always find the QR code that allows you to down- load the App and find out about all the recipes we have put together, just for you.
Primadonna Aromatic 6 CLEANING AND MAINTENANCE 6.1 Cleaning removable parts Under the heading that follows, you will find instructions on the various cleaning and servicing operations recommended by De’Longhi. To facilitate proper cleaning of the machine, many of the components are designed so that they can be removed and washed with ease.
Please note: If there is no dishwasher available, it is recommended that components be left to soak in warm water (40 °C approx) and washing-up liquid for around 30 minutes. Rinse thoroughly under running water, and finally, dry with a clean cloth. 6.2 Dishwasher safe components 6.2.1 Cleaning the grounds container: When prompted by the machine (see...
Page 69
Important! Danger of scalding! If several milk-based drinks are prepared one after the other, the metal cup tray (A14) becomes hot. Wait for it to cool down before touching it, and handle from the front only. 1. Remove the drip tray (A6) and the grounds container (A12)
6.2.3 Cleaning the milk carafes 6.2.3.1 Cleaning the milk carafe after use Every time a milk-based drink is delivered, the machine will prompt the user to clean the carafe (D7) (Clean function) to ensure that the lid (E2) of the carafe is not left unwashed. To start the cleaning operation, proceed as follows: 1.
6.2.3.2 Thorough cleaning of milk carafe Thorough cleaning of the milk carafe (D7) is a key factor in securing opti- mum and consistent results from the machine over time. Please note For cleaning after each preparation of a milk drink, see heading "6.2.3.1 Cleaning the milk carafe after...
6. Make sure there are no milk residues left in the cavity and the chan- nel on the underside of the dial (fig. 53). If necessary, scrape with a toothpick. 7. Check that the intake tube (E6) and the outlet tube (E3) are not clogged with milk residues.
6.2.5 Cleaning the nozzles of the drinks spout This model has been designed to give a prompt that will remind you when to clean the removable brewing unit (A19) and the coffee spout nozzles (A22 and A23) (see heading “6.6 Deep cleaning of the machine”).
6.3 Components that should be soaked Cup tray (A14) Grounds container support (A13) Service/cleaning water spout (D2) Travel mug > 30 min >40 °C Please note: Leave components to soak in warm water (40 °C approx) and washing- up liquid for around 30 minutes. Rinse thoroughly under running water, and finally, dry with a clean cloth.
1. Switch off the machine (see heading "3.1.2 Turning off"); 2. Remove the drip tray (A6); Important! To get the best possible results from cleaning operations, remember always to empty the coffee grounds container (A12) and the drip tray (A6). 3.
6.4 Components washed with running water Water tank and lid (A8) >40 °C 6.4.1 Cleaning the water tank and lid The water tank (A8) should be cleaned periodically (about once a month) or at all events, if the machine is not used for more than 3 days. Cleaning the water tank is also one of the required steps in the proce- dure for replacement of the water softener filter (D8)
6.5 Cleaning the body of the machine 6.5.1 Cleaning the inside of the machine Danger of electric shock! Before carrying out cleaning operations on internal parts, the machine must be turned off (see heading "3.1.2 Turning off") and unplugged from the mains power supply. Never immerse the machine in water Check periodically (about once a month) that the inside of the machine (accessible once the drip tray (A6)
6.6 Deep cleaning of the machine 6.6.1 Deep cleaning of the machine The machine needs a major clean periodically, in order to remove residual deposits of coffee that can sometimes form in and around certain parts. Your machine will let you know when this kind of cleaning is required, and you can decide whether to do it immediately, or wait until a later time (see heading "7 FREQUENT PROMPTS AND ALARM...
Page 79
Please note: If the brewing unit is difficult to fit, adapt it to the right size (before insertion) by applying pressure to the two levers (fig. 58). 12. Once inserted, make sure the two coloured buttons have snapped out; 13. Close the brewing unit flap, ensuring it is firmly in position, and reposition the water tank;...
Please note: • The second time that the machine displays the cleaning prompt, the guided procedure will appear only if “Show me all steps” is selected following step 3; otherwise, once all the steps described above for cleaning the removable brewing unit and the coffee nozzles have been completed correctly, simply press “Done”.
Page 81
Please note: If the brewing unit is difficult to fit, adapt it to the right size (before insertion) by applying pressure to the two levers (fig. 58). Once inserted, make sure the two coloured buttons have snapped out; Close the brewing unit flap and ensure it is firmly in place; 10.
6.6.3 Descaling Descaling is a deep-cleaning function of your machine that serves to eliminate the limescale residues which can form gradually along the cir- cuit that conveys water from the tank to your cup. Not only does descaling prolong the life of your machine, it also makes a considerable difference to the quality of the drinks you prepare.
Page 83
3. Press "Start" to view the guided descale procedure; 4. Attach the service/cleaning water spout (D2) (fig. 7) (located in the accessories compartment, if specified for the particular model of machine); 5. Remove and empty the drip tray (A6) and the coffee grounds con- tainer (A12) (fig.
6.6.4 Management of water filter To ensure the performance of the machine remains constant over time, the use of a De’Longhi water softener filter (D8) is recommended. For more information, visit www.delonghi.com. WATERFILTER EAN: 8004399327252 6.6.4.1 Installing the water filter De’Longhi water softener filter...
7. Remove the water tank (A8) from the machine and fill with fresh drinking water; remove the lid of the tank and immerse the filter in the water, while squeezing the middle section 2 or 3 times so that the air bubbles can escape (fig.
Page 86
5. To install a new filter, press "Yes" and follow the instructions step by step on the display, from e point 4 of the heading "2.4 Installing the water filter"; alternatively, press "No" to go back to the homepage, without any filter installed in the machine.
Primadonna Aromatic 7 FREQUENT PROMPTS AND ALARM MESSAGES In this section, you will find a list of possible prompts and alarm messages, organized as follows. • Messages regarding the water tank and the coffee grounds container • Messages regarding the water filter •...
Page 88
• Too much pre-ground coffee has I am unable to complete been used your drink. Please empty Remove the drip tray (A6) and the the grounds container and grounds container (A11), empty drip tray and try again. Reduce the quantity of them both then return all parts pre-ground coffee and try to the machine and repeat the...
7.2 Messages regarding the water filter • The water softener filter (D8) spent. • Press “Ok” to remove/replace the It's time to replace filter, or “No” if the intention is to do your water filter. it later. Follow the instructions under Ready? heading "6.6.4 Management of water...
Page 90
• The beans are too finely ground, so that the coffee is delivered too Sorry, I am unable to complete your drink. slowly or not at all. Go to the settings and • Press “Ok” to go back to the reduce the intensity, homepage.
7.4 Messages regarding the carafes • The LatteCrema Hot carafe is still on the machine. • Press "Ok" and proceed with other Remember to store the preparations, or remove the carafe milk carafe in the fridge and place it in the fridge. •...
Page 92
• The LatteCrema Hot carafe (D7) been placed in the machine with the Ready to start the froth adjustment/clean dial cleaning process? the “Clean” position. Alternatively, you can Position a container under the milk turn the dial to one of spout (E3) and press "Yes"...
Page 93
• If you want to prepare another drink straight away, press “later” and proceed to make the drink, but Position a container remember to carry out the cleaning under the milk spout. procedure by turning the dial to Turn the dial to Clean Clean, before removing the carafe and placing it in the fridge.
Page 94
• The machine has been asked to make a drink with hot milk, but using the wrong milk carafe (LatteCrema You are using the Cool carafe). LatteCrema Cool carafe • Remove carafe intended Please change the for cold milk drinks and use the carafe or your choice carafe designed for hot milk drinks of drink...
Page 95
• Installation/replacement filter interrupted completed correctly. • Press “Yes” to continue (see heading Oops, the process has "6.6.4 Management of water filter"). been interrupted. Ready to continue? • Indicates that the machine needs descaling. • If the intention is to proceed with It's time to descale.
Page 96
• Descaling interrupted completed correctly • Press “Yes” to continue (see heading "6.6.3 Descaling"). Oops, the descaling process has been interrupted. Ready to continue? • Request to set the day and time again. “→” • Press to go to the next screen Oops! I forgot what and set the day and time, then press time and what day it...
7.5 Messages regarding cleaning and descaling • The machine has detected impurities in its internal circuits. • Wait until the machine completes Just doing little the cleaning cycle and displays cleaning. Back in a the message to empty the coffee moment.
Page 98
• A prompt has been given to start a function requiring the use of the service/cleaning water spout (D2) Insert descaling spout but the accessory has not been fitted to the machine. • The service/cleaning water spout (D2) was detached during the process of descaling the machine or emptying the water circuit.
7.6 Messages of a general nature or temperature-related • General alarm • Contact customer services and/or Something's not right: an authorized Service Centre. Can you refer to the user manual please? • Malfunction of internal cooling fan. • Contact customer services and/or an authorized Service Centre.
Primadonna Aromatic 8 FAQ • Machine does not switch on The cord (A7) is not plugged firmly into the mains socket The main switch (A11) is not pushed in (see heading "3.1.1 Turning on"). • Coffee not hot (1) It has been 2-3 minutes since the last preparation and the internal circuit of the machine has cooled down: in this situation, a hot rinse is advisable.
Page 101
• Coffee weak or not creamy enough (2) The coffee is unsuitable. Use coffee for espresso machines. • Coffee weak or not creamy enough (3) The coffee is not fresh: the pack has been open too long and it has lost its flavour.
Page 102
• Milk presents large bubbles, or splashes from the milk spout, or is under-frothed (1). Use cow’s milk or vegetable drinks at refrigerator temperature (about 5° C). If the result is still not as expected, try changing the brand of milk. In the case of vegetable drinks, use “Barista”...
Page 103
• Cup shelf (A10) very hot. Several drinks have been prepared in rapid succession. If the cup shelf needs to be removed, use the handle designed for the purpose or wait a few minutes for the metal parts to cool. •...
Primadonna Aromatic 9 TECHNICAL DATA Voltage: 220-240 V~ 50-60 Hz max. 10 A Power: 1450 W Pressure: 1.9 MPa (19 bar) Water tank capacity: 2.2l Size LxDxH: 262x485x390 mm Cord length: 1250 mm Weight (varies according to model): 12/13 kg Max bean hopper capacity: 500 g De'Longhi reserves the right to modify the technical specification and styl-...
Need help?
Do you have a question about the PRIMADONNA AROMATIC ECAM630.35 and is the answer not in the manual?
Questions and answers