Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bosch WQH245BH0
Summary of Contents for Bosch WQH245BH0
- Page 1 Tumble dryer WQH245BH0 [en] User manual and installation instructions...
-
Page 2: Table Of Contents
Further information and explanations are available online: Table of contents 1 Safety ........... 4 8 Programmes ...... 25 1.1 General information.... 4 8.1 Automatic programmes... 25 1.2 Intended use...... 4 8.2 Timed programmes .... 27 1.3 Restriction on user group.. 4 9 Accessories....... 28 1.4 Safe installation ...... - Page 3 21 Consumption values.... 48 14.3 Activating Wi-Fi on the ap- pliance ........ 35 22 Technical data ...... 49 14.4 Deactivating Wi-Fi on the appliance ....... 35 23 Declaration of Conformity .. 49 14.5 Installing the software up- 23.1 Statement of Compliance date ........ 35 for Great Britain .....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The heavy weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
-
Page 9: Safe Cleaning And Maintenance
Safety en ▶ Rinse the laundry thoroughly with warm water and detergent be- fore drying it in the machine. ▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. - Page 10 en Safety An ingress of moisture can cause an electric shock. ▶ Before cleaning, pull out the mains plug or switch off the fuse in the fuse box. ▶ Do not use steam- or high-pressure cleaners, hoses or sprays to clean the appliance. WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous.
-
Page 11: Preventing Material Damage
Preventing material damage en Foam and foam rubber may deform Preventing material damage 2 Preventing material or melt during the drying process. Do not dry laundry that contains damage ▶ foam or foam rubber. Unsuitable cleaning products may Preventing material damage ATTENTION! damage the surfaces of the appli- The functionality of the appliance ance. -
Page 12: Energy Saving Mode
en Installation and connection ¡ Do not exceed the programme's Remove any accessories from the maximum load capacity. Pro- drum. grammes → Page 25 Close the door. ¡ After drying, clean the lint screen. → "Cleaning the fluff filter", 4.2 Contents of package Page 31 After unpacking all parts, check for ¡... -
Page 13: Water Outlet Hose
Installation and connection en If residual water in the appliance Installation loca- Requirements freezes, this may cause damage to tion the appliance. In a washer-dryer Only use the ori- Do not install or operate this appli- ▶ stack ginal connection ance anywhere that is liable to ex- set from the perience frost or outdoors. - Page 14 en Installation and connection container. Use the water outlet hose Pull out the condensation hose to drain away excess condensation from the connecting piece. directly into the waste water system. Note ¡ Operate this appliance using the water outlet hose provided. → Page 14 If you connect the water outlet hose, you do not have to regularly...
- Page 15 Installation and connection en Push the water outlet hose as far Water outlet connection types as it will go into the connecting ATTENTION! piece. In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶...
-
Page 16: Aligning The Appliance
en Installation and connection bow and secure it using fixing ma- terial. Secure the elbow to the gully. 4.5 Aligning the appliance In order to reduce vibrations and noises, align the appliance correctly. To align the appliance, turn the ap- ▶ pliance feet. Check that the appli- ance is level using a spirit level. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. -
Page 18: Control Panel
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Buttons → Page 22 Buttons → Page 22 and dis- play → Page 19 5.3 Operating logic Some areas of the display are but- tons and respond to touch. -
Page 19: Display
Display en Display 6 Display The display shows the current set- Display tings, options or relevant information. Depending on the programme status, the display shows some information in area, e.g. . Note: Additional functions may be available as a result of software updates. → "Installing the software update", Page 35 If a software update is available, you can find further information in the Home Connect app. - Page 20 en Display Indicator Description ) Start, cancel or pause ¡ Lights up: The programme is running and can be can- celled or paused. ¡ Flashes: The programme can be started or continued. The dryness level is activated. → Page 33 The dryness level is activated. → Page 33 The dryness level is activated.
- Page 21 Display en Indicator Description Settings that are not available on the appliance have been set via the Home Connect app. You can find more information in the Home Connect app. Programme status: Crease-reduction function ) Programme status: Pause Programme status: Programme end Example...
-
Page 22: Buttons
en Buttons Buttons 7 Buttons Below is an overview of the buttons and their setting options. Buttons Note: Additional functions may be available as a result of software updates. → "Installing the software update", Page 35 If a software update is available, you can find further information in the Home Connect app. - Page 23 Buttons en Button Selection Description Favorit ¡ Saving Press the button for ap- prox. 3 seconds to save ¡ Setting your customised pro- gram settings. → "Saving the pro- gramme settings", Page 29 If you briefly press the button, you can set cus- tomised program set- tings for your program.
- Page 24 en Buttons Button Selection Description Fertig in ¡ Programme end time ¡ Set the programme end time. ¡ Programme duration The programme dura- tion is already in- cluded in the set num- ber of hours. Once the programme has started, the pro- gramme duration is displayed.
-
Page 25: Programmes
Programmes en Note: Additional functions may be Programmes 8 Programmes available as a result of software up- dates. You can dry your fabrics using either Programmes → "Installing the software update", an automatic programme or a timed Page 35 programme. If a software update is available, you can find further information in the Home Connect app. - Page 26 en Programmes Programme Description Max. load (kg) ¡ Once the programme has ended, shake the items of laundry to distribute the stuffing and eliminate any pockets of moisture. ¡ If you dry the pillows and the pillows are not completely dry at the end of the programme, dry the pillows with a timed programme.
-
Page 27: Timed Programmes
Programmes en 8.2 Timed programmes Timed programmes are programmes with a defined or adjustable programme duration. The programme ends once this time has elapsed, even if the laundry is still not dry, for example. Timed programmes are suitable for drying individual items of laundry or thin fabrics. Tip: The laundry's care labels provide you with additional information about pro- gramme selection. -
Page 28: Accessories
en Accessories Accessories 9 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Tip: Some accessories are available in other colours. Contact customer service. → Page 46 Order number Connection kit To save space, stack the WTZ27510 appliance on a suitable washing machine of the same width and depth and that is from the... -
Page 29: Laundry
Laundry en The switch-on process takes a few Laundry 10 Laundry seconds. Note: The lighting for the drum goes Laundry out automatically. 10.1 Preparing the laundry 11.2 Setting a programme ATTENTION! Objects remaining in the laundry may damage the laundry and the drum. Turn the programme selector and Remove all items from any pock- set the required programme. -
Page 30: Opening The Door
en Basic operation 11.4 Opening the door 11.6 Starting the programme Grip under the door handle and Requirement: A programme is set. pull on the door. → Page 29 Press ▶ a The display shows the programme duration or the programme end time. a After the programme has ended, the display shows: "End". -
Page 31: Put The Appliance Into Standby Mode
Basic operation en Remove the two-part fluff filter. 11.10 Put the appliance into standby mode Press . ▶ 11.11 Fluff filter During drying, fluff from the laundry is collected in the fluff filter. The fluff fil- ter protects the appliance from fluff. Cleaning the fluff filter If the drying programme has finished or the display shows a notification Remove the fluff from the recess. -
Page 32: Condensation Container
en Basic operation Open the two fluff filters. Close the two fluff filters and put them together. Remove the fluff. Insert the two-part fluff filter. Clean the two fluff filters thoroughly under warm, running water and Close the door. then dry them off. 11.12 Condensation con- tainer Condensation that forms in the appli-... -
Page 33: Dryness Level
Dryness level en Emptying the condensation Inserting the condensation container container If the drying programme has finished Push the condensation container ▶ or the display shows a notification in as far as it will go. while the appliance is in operation, empty the condensation container. -
Page 34: Changing The Dryness Level
en Childproof lock 12.1 Changing the dryness Childproof lock 13 Childproof lock level Secure your appliance against being Childproof lock For some automatic programmes, operated unintentionally using the you can change the dryness level so controls. that your laundry will be drier or more damp. -
Page 35: Setting Up The Home Connect App
Home Connect en The Home Connect app guides you 14.3 Activating Wi-Fi on the through the entire login process. Fol- appliance low the instructions in the Home Con- nect app to configure the settings. Press and hold Fernstart for ap- prox. 3 seconds. Tip: Please also follow the instruc- Press ... -
Page 36: Resetting The Appliance
en Home Connect a In the event of a malfunction, in- gramme for drying the laundry once stallation may take up to you have washed your laundry in the 40 minutes. Do not reset the net- washing machine. work settings or the appliance to Intelligent programme the factory settings. -
Page 37: Data Protection
Basic settings en 14.10 Data protection 15.1 Overview of the basic settings Please see the information on data protection. Note: Additional functions may be The first time your appliance is available as a result of software up- registered on a home network dates. connected to the Internet, your → "Installing the software update", appliance will transmit the following Page 35... -
Page 38: Changing The Basic Set- Tings
en Appliance care Preparing the condensation 15.2 Changing the basic set- container for the appliance care tings programme To call up the basic settings, press If you drain the condensation from Einstellungen . the appliance using the drain hose, prepare the condensation container a The display shows Einstel- before running the appliance care... -
Page 39: Running The Basic Appli- Ance Care Programme
Appliance care en ation container and insert it into 16.3 Running the basic appli- the recess in the top of the con- ance care programme densation container. → Page 38 To remove light dirt deposits in the Insert the condensation container appliance, you can run the basic ap- so that it locks into place. -
Page 40: Cleaning And Servicing
en Cleaning and servicing a The appliance care programme Cleaning and servicing 17 Cleaning and servi- starts and a signal tone sounds. a After around 3 hours, the appli- cing ance pauses the appliance care programme and the remaining pro- To keep your appliance working effi- Cleaning and servicing gramme duration flashes on the ciently for a long time, it is important... -
Page 41: Condensation Container Filter
Cleaning and servicing en 17.2 Condensation container filter During drying, fluff from the laundry gets into the condensation. The filter in the condensation container pro- tects the appliance from fluff. Clean the filter for the condensation tank. The filter is cleaned automatically when the condensation container is emptied. -
Page 42: Troubleshooting
en Troubleshooting Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its features. ▶... - Page 43 Troubleshooting en Fault Cause and troubleshooting Not a fault. The automatic self-cleaning function rinses the appliance's heat exchanger. No action required. Note: Do not pull out the condensation container and do not interrupt the programme. The display and but- Software fault. tons do not respond. To restart the appliance, press and hold for ap- proximately 5 seconds.
- Page 44 en Troubleshooting Fault Cause and troubleshooting The drying time is too Run the basic appliance care programme ▶ long. → Page 38. Humming, whirring or Not a fault. The compressor, compressor ventilation or pumping noises. condensation pump is active. No action required. The laundry is too The selected programme is unsuitable for the type of damp.
- Page 45 Troubleshooting en Fault Cause and troubleshooting Creasing. Easy Care fabrics have been dried for too long. Change or adjust the dryness level. → Page 33 ▶ The crease-reduction function is not activated. Activate the crease-reduction function. → Page 22 ▶ Water is leaking from Appliance is not correctly aligned. the appliance.
-
Page 46: Transportation, Storage And Disposal
en Transportation, storage and disposal This appliance is la- Transportation, storage and disposal 19 Transportation, stor- belled in accordance age and disposal with European Directive 2012/19/EU concerning Transportation, storage and disposal used electrical and elec- 19.1 Disposing of old appli- tronic appliances (waste electrical and electronic ance equipment - WEEE). -
Page 47: Product Number (E-Nr.), Production Number (Fd) And Consecutive Numbering (Z-Nr.)
Customer Service en 20.1 Product number (E-Nr.), production number (FD) and consecutive num- bering (Z-Nr.) You can find the product number (E- Nr.), the production number (FD) and the consecutive numbering (Z-Nr.) on the appliance's rating plate. Depending on the model, the rating plate is located: ¡... -
Page 48: Consumption Values
en Consumption values Consumption values 21 Consumption values The Eco programme is suitable for The actual values may deviate from Consumption values drying cotton laundry with a normal the indicated values depending on dampness level, and is the most effi- the type of fabric, composition of cient programme for drying damp laundry to be dried, residual moisture cotton laundry in terms of combined... -
Page 49: Technical Data
Technical data en Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Baumwolle + 12.0 1400 2:05 0.96 Baumwolle + 12.0 1400 1:22 0.54 Baumwolle + 12.0 1000... - Page 50 Conformity essential requirements and other rel- A detailed Declaration of Conformity evant provisions of Directive can be found online at www.bosch- 2014/53/EU. home.co.uk among the additional A detailed RED Declaration of Con- documents on the product page for formity can be found online at your appliance.
- Page 51 Declaration of Conformity en The manufacturer, BSH Hausgeräte GmbH deems that it has complied with ¡ provision 5.1-1 of ETSI EN 303 645 v2.1.1 and, where relevant, provision 5.1-2 of ETSI EN 303 645 v2.1.1; ¡ provision 5.2-1 of ETSI EN 303 645 v2.1.1;...
- Page 52 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the WQH245BH0 and is the answer not in the manual?
Questions and answers