Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FSE53960Z
Summary of Contents for AEG FSE53960Z
- Page 1 EN User Manual | Dishwasher FSE53960Z aeg.com\register...
-
Page 2: Table Of Contents
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. -
Page 3: Children And Vulnerable People Safety
for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning... -
Page 4: Safety Instructions
• Follow the maximum number of 14 place settings. • The appliance door should not be left in an open position to avoid the tripping hazard. • If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. -
Page 5: Water Connection
Make sure that there is access to the complete. Some detergent may remain on mains plug after the installation. the dishes. • Do not pull the mains cable to disconnect • Do not store items or apply pressure on the appliance. Always pull the mains plug. the open door of the appliance. -
Page 6: Installation
"Rückschlagventil" in the German user manual. 3.1 Building in www.youtube.com/electrolux www.youtube.com/aeg How to install your AEG/Electrolux 60 cm Sliding Door Dishwasher 3.2 Safety caps If the furniture panel is not installed, open the 5 mm appliance door carefully to avoid the risk of injury. -
Page 7: Product Description
4. PRODUCT DESCRIPTION Ceiling spray arm Lower basket Upper spray arm Upper basket Lower spray arm Cutlery drawer Filters Rating plate The graphic is a general overview. For Salt container more details, refer to other chapters or documents provided with the appliance. Air vent Rinse aid dispenser Detergent dispenser... -
Page 8: Programme Selection
Option buttons (EXTRAS) AUTO Sense program button 5.1 Display 5.2 ECOMETER The ECOMETER indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is. indicates the most environmentally friendly programme selection for a normally A. -
Page 9: Glass Care
normal soil. This is the standard ExtraPower programme for test institutes. ExtraPower improves the dishwashing 6.2 AUTO Sense results of the selected programme. The option increases the wash temperature and The AUTO Sense programme automatically duration. adjusts the dishwashing cycle to the type of load. -
Page 10: Consumption Values
Programme Dishwasher Degree of Programme phases EXTRAS load soil Crockery, cut‐ Normal, lightly • Prewash • ExtraPower lery, pots, pans dried-on • Dishwashing 50 °C • GlassCare • Intermediate rinse • Final rinse 55 °C • Drying • AirDry AUTO Sense Crockery, cut‐... -
Page 11: Basic Settings
7. BASIC SETTINGS You can configure the appliance by changing basic settings according to your needs. Number Settings Values Description 1) Water hardness 1L - 10L (default: Adjust the level of the water softener according to the water hardness in your area. Rinse aid empty no‐... -
Page 12: The Water Softener
The lights related to the Previous, OK and 5. Press and hold simultaneously Next are on. for about 3 seconds to exit setting mode. How to change a setting The appliance returns to the programme selection. Make sure the appliance is in setting mode. The saved settings remain valid until you 1. -
Page 13: The Rinse Aid Empty Notification
Regeneration process when it occurs at any point at the beginning For the correct water softener operation, the or in the middle of a programme. resin of the softener device needs to be regenerated regularly. This process is automatic and is the part of the normal All the consumption values mentioned in dishwasher operation. -
Page 14: Key Tones
The latest programme that was completed before the appliance deactivation is saved. It is then selected automatically after you activate the appliance. When the latest programme selection is disabled, the default programme is ECO. 7.8 TimeBeam AirDry is automatically activated with all programmes. -
Page 15: The Salt Container
process. Do not use detergent and do not CAUTION! put dishes in the baskets. After starting the programme, the appliance Water and salt can come out of the salt recharges the resin in the water softener for container when you fill it. To prevent up to 5 minutes. -
Page 16: Daily Use
9. DAILY USE 9.2 How to select and start a 1. Open the water tap. programme using MY TIME 2. Press and hold until the appliance is selection bar activated. 3. Fill the salt container if it is empty. 1. Slide your finger across MY TIME 4. -
Page 17: How To Delay The Start Of A Programme
9.4 How to start the AUTO Sense The appliance returns to the programme program selection. 1. Press • The light related to the button is on. Make sure that there is detergent in the • The display shows the longest detergent dispenser before you start a possible program duration. -
Page 18: Hints And Tips
10. HINTS AND TIPS 10.1 General 10.2 Using salt, rinse aid and detergent Follow the hints below to ensure optimal cleaning and drying results in daily use and to • Only use salt, rinse aid and detergent protect the environment. designed for dishwasher. -
Page 19: Care And Cleaning
4. When the programme is completed, and unprotected carbon steel. This can adjust the water softener according to the cause them to crack, warp, discolour, pit water hardness in your area. or rust. 5. Adjust the released quantity of rinse aid. •... -
Page 20: Internal Cleaning
11.5 Cleaning the filters 2. Press and hold simultaneously The filter system is made of 3 parts. for about 3 seconds. The indicators flash. The display shows the programme duration. 3. Close the appliance door to start the programme. When the programme is complete, the indicator is off. -
Page 21: Cleaning The Lower Spray Arm
CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.6 Cleaning the lower spray arm We recommend to clean the lower spray arm regularly to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. -
Page 22: Cleaning The Upper Spray Arm
11.7 Cleaning the upper spray arm 2. Move the upper basket to the lowest level Do not remove the upper spray arm. If the to reach the spray arm more easily. openings in the spray arm are clogged, 3. To detach the spray arm (C) from the remove the remaining particles of soil with a delivery tube (A), turn the mounting thin pointed object, e.g. -
Page 23: Troubleshooting
12. TROUBLESHOOTING Refer to the below table for information on WARNING! possible problems. Improper repair of the appliance may With some problems, the display shows an pose a danger to the safety of the user. alarm code. Any repairs must be performed by qualified personnel. - Page 24 Problem and alarm code Possible cause and solution Technical malfunction of the appli‐ • Switch the appliance off and on. ance. The display shows iC0 or iC3. The level of water inside the appli‐ • Switch the appliance off and on. ance is too high.
- Page 25 12.1 The product number code 1. Press and hold simultaneously (PNC) for about 3 seconds. If you contact an Authorised Service Centre, The display shows the PNC of your you need to provide the product number code appliance. of your appliance. 2.
-
Page 26: Technical Information
Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener". • Silver and stainless steel cutlery were placed together. Do not place silver and stainless steel items close together. There are residues of detergent in the •... -
Page 27: Environmental Concerns
Water supply pressure Min. / max. MPa (bar) 0.05 (0.5) / 1 (10) Water supply min. 5 - max. 60 °C Cold water or hot water Capacity Place settings Refer to the rating plate for other values. If the hot water comes from alternative source of energy (e.g. solar panels), use the hot water supply to de‐ crease energy consumption. - Page 28 156801843-A-332023...
Need help?
Do you have a question about the FSE53960Z and is the answer not in the manual?
Questions and answers