Zenith XBV613 - DVD/VCR Combination Service Manual page 83

DISASSEMBLY AND ASSEMBLY OF DECK MECHANISM
(A)
Head F/E
(Fig. A-3-4)
8. Motor Assembly L/D (Fig. A-3-1)
1) Take the connector (C1) connected to the Capstan motor
PCB out.
2) Remove a screw (S4) of the chassis (S4) and step back-
ward, and disassemble it while holding it up.
9. Gear Wheel (Fig. A-3-2)
1) Release the hook (H5) of the gear wheel and disassemble
it upward.
4-5
Base Assembly A/C Head
(Fig. A-3-5)
Fig. A-3
Arm Assembly Cleaner
(Fig. A-3-3)
(A)
(H5)
(S5)
(C1)
10. Arm Assembly Cleaner (Fig. A-3-3)
1) Separate the (A) part of Fig. A-3-1 from the embossing of
chassis, and hold it up while turning it anti-clockwise.
11. Head F/E (Fig. A-3-4)
1) Separate the (A) part of the head F/E from the emboss-
ing of chassis, and hold it up while turning it anti-clock-
wise.
12. Base Assembly A/C Head (Fig. A-3-5)
1) Release a screw (S5) and disassemble while holding it up.
Gear Wheel
(Fig. A-3-2)
Motor Assembly L/D
(Fig. A-3-1)
(S4)