Related Manuals for Freelap SKI
Summary of Contents for Freelap SKI
-
Page 1: Table Of Contents
RACE EXPER IENCE Installation Guide Summary 01. Overview Ski version MTB version 02. General instructions 03. Fixing devices to the ground 04. Start gate Installation Functioning 05. Finish gate Installation Functioning... -
Page 2: 01. Overview
01. Overview SKI version Start gate Start Box LED Display - Start Triggers the start procedure when the skier presses the button. Indicates if the skier can take the start. Starting gate Starts the timer as soon as the skier moves the stick. -
Page 3: Mtb Version
MTB version Start gate Start Box LED Display - Start Triggers the start procedure when the rider presses the button. Indicates if the rider can take the star. Starting plate Starts the timer as soon as the as the wheel passes on the plate. -
Page 4: 02. General Instructions
- 1 skier/rider at a time: the athlete must wait for the previous skier/rider to finish the race before starting. - To switch from the ski version to the MTB version, simply remove the stick from the starting gate and connect the starting plate to the “SENSOR”... -
Page 5: 04. Start Gate
- Connect the Starting plate by connecting it to the 3-pole connector of the «SENSOR» port of the Start Box. START - LED screen (small screen) ON/OFF Start box button Start request button 5-pole connector LED Display support Max.1m 12V charger Starting gate (SKI) Starting plate (MTB) Max. 4m 3-pole 220v DISPLAY connector SENSOR Feet... -
Page 6: Functioning
B/ Functioning - The start LED screen displays the Freelap logo when no time has been received yet. - The skier/rider cannot start for the moment. - The skier/rider presses the red button on the Start box to request to start. -
Page 7: 05. Finish Gate
05. Finish gate A/ Installation Laser foot Reflector foot Feet: Max. 6.5 meters - Attach the metal stakes to the 2 wooden feet provided. - Plant them in the ground as follows: - Connect the 12V charger to the back of the LED display («DISPLAY» indication, 3-pole connector). - Connect the laser to the back of the LED display («LASER»... -
Page 8: Functioning
Av. D.-Jeanrichard 2A - CH-2114 Fleurier - Switzerland +41 (0)32 861 52 42 / sales@freelap.ch www.freelap.com SWISS FOLLOW US TECHNOLOGY © Freelap SA - All rights reserved | Freelap is a registered trademark of Freelap SA. V120225...
Need help?
Do you have a question about the SKI and is the answer not in the manual?
Questions and answers