SISCO -DDS-10 Operation Manual

130mm
SISCO-4 in 1 Digital Water Quality Tester
Operation Manual
Please read this manual carefully before use
C:0 M:66 Y:91 K:0
Technical Parameters
model
0.0µS/cm(ppm)-20.00mS/cm(ppt)
Measuring range
0.1µS/cm(ppm)-0.01mS/cm(ppt）
Conductivity
resolution
±1%F.S
Measuring accuracy
0.0-60ÿ/32-140ÿ
Measuring range
0.1℃
resolution
Automatic, 0-60℃/32-140℉
Compensation
10-40℃ (default: 25℃)
range Temperature
temperature
± 1 % F. S
coefficient Reference
0-20.00ppt
temperature range
Extraposition
Measuring accuracy Temperature
sensor structure Measuring range
External 0-20.00ppt
TDS
TDS coefficient 0.01-1.0 adjustable (default 0.55)
% F. S
measurement
0-16.00ppt NACL
accuracy
NACL 0.65
salinity
measurement
± 1 % F. S
range salinity
U-shaped glass
coefficient measurement
Auto; 1408µS/cm (1 point calibration)
accuracy electrode
rice digital screen
sensor type
other
orange
calibration mode
Possess
Sound switch
backlight color sound
(7#)AAA battery X1PCS
switching pow
Troubleshooting
error code Fault diagnosis
E-01
The electrode sensor is damaged or aged
E-02
Battery power is too low
E-03
Unknown fault
E-04
beyond the scope of use
E-05
Other hardware failures
130mm
SISCO-DDS-10
Solution
Replace electrode tip
Replace the battery, it is recommended to use (7#) AAA alkaline batteries
Free replacement for non-human reasons during the warranty period
Clean the electrode sensor and use it according to the instructions
Free replacement for non-human reasons during the warranty period
1