Download Print this page

SISCO SRT6210 User Manual

Download this manual

SRT6210

User Manual

Need help?

Do you have a question about the SRT6210 and is the answer not in the manual?

Page 1 SRT6210 User Manual...
Page 2: Standard Configuration
2. Specifications and parameters 1. Features Display: Blue backlight, 4-bit digital display, 10mm LCD The instrument adopts computer technology, in line with the national Measurement parameters: Ra, Rz, Rq, Rt. standard GB/T6062 and ISO, DIN, ANSI and JIS four standards, can be widely applied to the production site, can measure the surface roughness Measuring range: of a variety of machined parts, according to the selected conditions of...
Page 3 3-13 Pins 3-15 Host Note: 3-16 Sensor socket 3-14 Protective casing A. The stylus of the sensor is A key part of the instrument and should be attached great importance. B. In the process of loading and unloading sensors, special attention should be paid not to touch the stylus, so as not to cause damage and affect the measurement.
Page 4 4.2.1 Save the measured values for later use SURFACE ROUGHNESS TESTER After measurement, it will be seen that the original "M" becomes M . In this state, you can press 『 key to save 『』 RaRz... CUTOFF RANGE SAVE the Ra, Rz, Rq, Rt data and measurement conditions into 0.8mm START...
Page 5 10.3.3 GAUSS Filter 10.4.3 Rq contour root-mean-square deviation The root-mean-square value of the ordinate l×5 value over a sample length Coasting length Rq =( ∑ y 10.3.4 D-P filter 10.4.4 Rt contour total peak and valley height. l×5 The sum of maximum contour peak height and maximum Coasting length contour valley depth within the assessed length.