Display Setting; Audio Setting - Toshiba SDV398 Owner's Manual

B

DISPLAY Setting

You can change the display functions. Follow steps 1 to 3 in the "CUSTOM Menu" section on page 27.
4
Select the desired item.
or
DISPLAY menu
DISPLAY
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
ENTER
Note:
PROGRESSIVE:
• You can set "PROGRESSIVE" to
"OFF" in "DISPLAY" menu or press
and hold [ B (PLAY)] on this unit
on the DVD side for more than
5 seconds during playback until
"P. SCAN" disappears on the DVD
player's display.
• When "PROGRESSIVE" is "ON",
"P. SCAN" appears on the DVD
player's display after you exit the
setup screen.
Note:
• In "QUICK" menu, "PLAYER
MENU", "TV ASPECT",
"PROGRESSIVE" or "DOLBY
DIGITAL" are available. "QUICK"
menu consists of the setting
menu frequently used, and they
are accompanied with
QUICK
You can make all settings in
"CUSTOM" menu.
C

AUDIO Setting

Choose the appropriate audio setting for your equipment. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the
"CUSTOM Menu" section on page 27.
4
Select the desired item.
or
AUDIO menu
AUDIO
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
DTS OFF
ENTER
Note:
• In "QUICK" menu, "PLAYER
MENU", "TV ASPECT",
"PROGRESSIVE" or "DOLBY
DIGITAL" are available. "QUICK"
menu consists of the setting
menu frequently used, and they
are accompanied with
QUICK
You can make all settings in
"CUSTOM" menu.
EN
E8EB6CD_SD-V398KC_EN_v1.indd 28 E8EB6CD_SD-V398KC_EN_v1.indd 28
5
TV ASPECT:
QUICK
(Default: 4:3 LETTER BOX)
See note on the right.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
ENTER
STILL MODE:
(Default: AUTO)
See note on the right.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
ENTER
PROGRESSIVE:
QUICK
(Default: OFF)
See note on the left.
TV ASPECT 4:3 LETTER BOX
STILL MODE AUTO
PROGRESSIVE OFF
ENTER
If there is no picture
or you do not press
any buttons for 15
seconds, "PROGRES-
SIVE" will switch to
"OFF" and it will exit
"SETUP" menu.
.
5
DRC (Dynamic Range Control): (Default: ON)
Set to "ON" to compress the range between soft and loud sounds.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
DTS OFF
DOWN SAMPLING: (Default: ON)
Set to "ON" when outputting in 48kHz.
Set to "OFF" when outputting the original sound.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
DTS OFF
DOLBY DIGITAL:
QUICK
Set to "BITSTREAM" when the unit is connected to a Dolby Digital decoder.
• BITSTREAM: outputs Dolby Digital signals.
• PCM: converts the Dolby Digital into PCM (2 channel).
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
DTS OFF
DTS: (Default: OFF)
QUICK
Set to "BITSTREAM" when the unit is connected to a DTS decoder.
.
DRC ON
DOWN SAMPLING ON
DOLBY DIGITAL BITSTREAM
DTS OFF
Select the
desired
setting.
TV ASPECT
ENTER
4:3 LETTER BOX
4:3 PAN & SCAN
16:9 WIDE
or
Select the
desired
setting.
STILL MODE
ENTER
AUTO
FIELD
FRAME
or
4:3 LETTER BOX
AUTO
ON
Select "YES".
Before proceeding...
1. Make sure your TV has progressive scan.
2. Connect with component video cable
NOTE: If there is no picture or picture is
distorted after selecting 'YES',
wait about 15 seconds for auto recovery.
or
A ctiva te P rogre ssi ve?
NO
YES
SELECT: K / L SET: ENTER
ENTER
Select "YES".
Confirm again to use progressive scan.
If Picture is good, select 'YES'.
or
NO NO
YES YES
SELECT: K / L SET: ENTER
OFF
ON
BITSTREAM
ENTER
OFF
ON
OFF
BITSTREAM
ENTER
OFF
(Default: BITSTREAM)
ON
ON
PCM
OFF
ENTER
ENTER
ON
ON
PCM
BITSTREAM
– 28 –
6
To exit "TV ASPECT" or "STILL
MODE" menu
To complete
"PROGRESSIVE" setting
ENTER
Note:
TV ASPECT:
• Select "4:3 LETTER BOX", so
that black bars may appear
on the top and bottom of the
TV screen.
• Select "4:3 PAN & SCAN" for a
full height picture with both
sides adjusted.
• Select "16:9 WIDE" if a wide-
screen TV is connected to
this unit.
STILL MODE:
• Select "AUTO" usually.
• If you select "AUTO", it
automatically selects the
best resolution setting
("FRAME" or "FIELD") based
on the data characteristics of
the pictures. (default)
• If you select "FIELD", the
picture in the still mode will
be stabilized.
• If you select "FRAME", the
picture in the still mode will
be highly defined.
• An individual picture on
the TV screen is called a
"frame", which consists of
two separate images called
as "field".
• Some pictures may be
blurred if you select "AUTO"
in the still mode due to their
data characteristics.
6
To exit the menu
Note:
DRC:
• This function is available
only on the discs which are
recorded in the Dolby Digital
format.
DOWN SAMPLING:
• When playing disc with
copyright protection, the
sound will be down sampled
at 48kHz, even if you set to
"OFF".
• This function is available only
on digital outputting of a disc
recorded in 96kHz.
2009/01/29 17:05:55 2009/01/29 17:05:55