Advertisement
Quick Links
Advertisement
Related Manuals for Fireco DorMag SmartSound
Summary of Contents for Fireco DorMag SmartSound
- Page 1 Compliance Made Easy DorMag SmartSound Userguide...
-
Page 2: Sensitivity Adjustment
For example, if your DorMag SmartSound is not releasing to the fie alarm sounder, it is likely that the sensitivity needs to be increased. If your DorMag SmartSound is going off to background noise you may need to decrease the sensitivity of the unit. - Page 3 3. Press play on the sound file with the phone next to the unit. Whilst the sound file is playing re-insert the battery pack and fasten 4. The DorMag SmartSound will boot-up and beep twice. Its LED will go solid for a few seconds 5.
- Page 4 3. Press play on the sound file with the phone next to the unit. Whilst the sound file is playing re-insert the battery pack and fasten 4. The DorMag SmartSound will boot-up and beep twice. Its LED will go solid for a few seconds 5.
- Page 5 Timed release Set the unit to close the door at a chosen time. This is useful for hotels where doors need to be kept open during the day to allow easy access but closed at night to reduce noise. 2 secs 1.
- Page 6 Disable the unit If you want to disable your DorMag SmartSound, so that it cannot retain the door, follow these steps. 4 secs 4 secs 1. Push and hold the button on the front of the unit for 4 seconds (ignore the beeping) 2.
-
Page 7: Factory Reset
By factory resetting your unit, all features applied will be removed. 1. Remove the battery carrier using a flat-head screwdriver and wait 10 seconds to let DorMag SmartSound fully power down 2. Whilst holding down the recessed button using a small screwdriver or equivalent re-insert the battery carrier - this must be done simultaneously 3. - Page 8 LED off with a constant beep-beep noise: The battery carrier is not fully inserted. Re-insert the battery carrier • Solid red LED with a constant beep-beep noise for 20 seconds, then the LED and buzzer turn off: Potential system fault. Please contact Fireco Customer Support on 01273 320650...
- Page 9 Weight 0.52kg Installation position (DorMag SmartSound) On the wall adjacent to the door, with the DorMag SmartSound magnet fully centred with the keeper plate Installation position (door keeper) Anywhere on the back of the door Max door to wall depth (when door is fully...
Need help?
Do you have a question about the DorMag SmartSound and is the answer not in the manual?
Questions and answers