Related Manuals for MOTECK TW61
Summary of Contents for MOTECK TW61
- Page 1 User Guide Double Motor TW61 2024.07_V2.0 Revision Technical changes may be made to improve the product without notice！...
- Page 2 Important Information ● The distance between the axes of the bed base must be 581 millimeters. ● The duty cycle of the double motor is 10%, that is, the maximum continuous operation time is 2 minutes, and the rest time is at least 18 minutes.
-
Page 3: Installation
Installation ● Overview 581mm Additional actuator 1 Additional actuator 2 Handset Handset Without memory function With memory function Protecting cap Handset wire Socket AC power cord Protecting cap Driving axis Driving axis Leg side AC power cord Back side... - Page 4 ● Installation steps 1. Before installing, do check that the mains power cord is not plugged into mains power supply. 2. Put two 9V DC backup batteries into the battery box: first remove the battery box cover, insert the battery and then put it back in the battery box cover.
-
Page 5: Position Memory
Bed Frame Control 1. Press and hold the button, the controlled bed board will continue to move, and it will stop automatically when it reaches the end. 2. If you release the button during the process, the movement of the bed board will stop immediately. - Page 6 Terms of Use The user is responsible for the suitability of MOTECK products, and the products listed on the MOTECK website are subject to change without notice. MOTECK reserves the right to terminate sales or delete any products displayed on the website or listed in its catalog.
Need help?
Do you have a question about the TW61 and is the answer not in the manual?
Questions and answers