Page 1
CAUTION: Before using this tool, please read this manual completely, • MAINTENANCE and follow all operating safety measures. Senix Australia Pty Ltd. 32/3 Westside Avenue, #Port Melbourne, Victoria, 3207 For customer support, please call 1300 461 825 or email us at info@senixtool.com SENIX.COM.AU v.
Not approved for wet cutting. Do not dispose of battery packs in rivers or immerse in water. Do not dispose of battery packs in fire. They will explode and cause injury. EN - 2 SENIX.COM.AU...
Do not let familiarity gained from the power tool. Keep cord away from frequent use of tools allow you to heat, oil, sharp edges or moving parts. become complacent and ignore tool Damaged or entangled cords increase the 3 - EN SENIX.COM.AU...
Page 4
WARNING instructions, taking into account the working conditions and the work to Use only SENIX X2 batteries (B20X2/B25X2/ be performed. Use of the power tool for B40X2/B50X2/B60X2/B80X2) and chargers operations different from those intended (CHX2/CHQX2/CHQX2-M-EU/CHDX2-M-EU).
Kickback causes and related warnings adjustment shifts while cutting, it may • Kickback is a sudden reaction to a pinched, cause binding and kickback. jammed or misaligned saw blade, causing Use extra caution when sawing into 5 - EN SENIX.COM.AU...
Holding the workpiece the battery pack but may be easily knocked by hand or against your body leaves it over. unstable and may lead to loss of control. • Keep your body positioned to either side EN - 6 SENIX.COM.AU...
Have the product checked by a qualified professional and repaired, if necessary, before you operate it again. INTENDED USE This circular saw is intended for sawing straight cuts in wood, wood-type materials and plastics. Do not use it for other purpose. 7 - EN SENIX.COM.AU...
SPECIFICATIONS* WARNING! Model PSCX2-M3-EU Wear protective gloves for this Motor Type Brushless assembly work and always lay the product on a flat and stable surface Input Voltage 18 V (20 V Max*) while assembling. Follow the assembly instructions step-by-step and use the pictures provided as a...
NOTE : the included screw. If necessary, refer to the manuals for the charger and the battery pack for more details about how to charge the battery pack and other information. Fig. 5 EN - 10 SENIX.COM.AU...
Rotate the bevel adjustment knob counterclockwise to loosen it. Pivot the baseplate to required angle between 0° and 55°. Fig. 11 WARNING! Do not operate the machine at low speeds for extended periods of time. Fig. 9 11 - EN SENIX.COM.AU...
If this occurs, the saw • Leaking, swollen, or cracked battery pack blade will “bind” in the workpiece causing • Loose hardware kickback, potential injury, and/or damage • Misalignment or binding of accessories to the workpiece and circular saw. EN - 12 SENIX.COM.AU...
Page 13
NOTE: To prolong battery life, store the battery pack separately from the tool in a 30%-50% charged condition. It's recommended to have your battery pack charged at least every 6 months. 13 - EN SENIX.COM.AU...
In most cases the problem can be solved quickly. PROBLEM POSSIBLE CAUSE Solution Contact us at Trigger is defective senix.support@yatusa.com Product does not Battery pack not properly Attach properly start attached Battery pack discharged...
Need help?
Do you have a question about the PSCX2-M3-EU and is the answer not in the manual?
Questions and answers