Related Manuals for BLAUBERG BlauCool BLHP-R-SPLIT Series
Summary of Contents for BLAUBERG BlauCool BLHP-R-SPLIT Series
- Page 1 MANUAL AIR-TO-WATER SPLIT TYPE HEAT PUMP TOUCH SCREEN WIRED CONTROLLER INDOOR UNIT (HYDRONIC MODULE)
- Page 2 AIR-TO-WATER SPLIT TYPE HEAT PUMP INDOOR UNIT (HYDRONIC MODULE) This wired controller is used for communicating with the system main board, controlling the operating status of the system through touch keys, and displaying the working status of the whole system through its LCD screen. The wired controller and the main board will check whether the communication is successful within 1 minute after power-on.
- Page 3 blaubergventilatoren.de Notes on using conditions: Power supply: AC 220V±30%, the main board of the hydronic module supplies power to the wired controller. Working environment temperature: -30 °C … +50 °C. Working environment humidity: RH10 % … RH95 %. Touch any key when the screen is off to light up the screen. PRESS THIS BUTTON TO TURN THE UNIT ON OR OFF ON / OFF PRESS THIS BUTTON TO RETURN TO THE MAIN INTERFACE...
-
Page 4: Electric Auxiliary Heating
AIR-TO-WATER SPLIT TYPE HEAT PUMP INDOOR UNIT (HYDRONIC MODULE) PRESS THIS BUTTON TO CHECK THE DATA Press button to enter the query status, press button or no operation for 5 seconds to exit the query interface and return to the main interface. Press button in the query status, it will show these data in turn: Ts1: AC side setting water temperature;... -
Page 5: Temperature Setting
blaubergventilatoren.de PRESS THIS BUTTON TO SET TEMPERATURE AND TIME Temperature setting. Press button for the first time in the main interface in the cooling and heating mode to enter the air-conditioning temperature Ts1 setting interface; In DHW mode, press button for the first time to enter the domestic hot water temperature Ts2 setting interface; Press button once to decrease the setting temperature by 1°C. - Page 6 AIR-TO-WATER SPLIT TYPE HEAT PUMP INDOOR UNIT (HYDRONIC MODULE) PRESS THIS BUTTON TO SET DIFFERENT FUNCTIONS 1. Clock Short press button, the clock icon flashes. When the clock icon flashes, short press button, the current time is displayed on the right side, the clock icon becomes constantly on, and it automatically exits after 10 seconds; When the clock icon flashes, long press button to enter the time setting interface.
- Page 7 blaubergventilatoren.de...
-
Page 8: Weekly Timer
AIR-TO-WATER SPLIT TYPE HEAT PUMP INDOOR UNIT (HYDRONIC MODULE) PRESS THIS BUTTON TO SET THE WEEKLY TIMER Enter the weekly timer setting mode, icon flashes, press button to select ON or OFF, and press button, at this time icon is always on, and enter the boot time setting. Long press button to switch setting items. -
Page 9: Error Code
blaubergventilatoren.de Error code Error code Description Water flow switch failure Communication failure between the hydronic module and outdoor unit Water outlet temperature sensor T1 malfunction Outdoor unit failure Water tank temperature Sensor T7 malfunction Heat exchanger water inlet temperature sensor Tw_in malfunction Heat exchanger water outlet temperature sensor Tw_out malfunction Communication failure between the hydronic module and wired controller Mode conflict... - Page 10 Blauberg Ventilatoren GmbH Aidenbachstr. 52 D-81379 Munich info@blaubergventilatoren.de www.blaubergventilatoren.de 08/2023...
Need help?
Do you have a question about the BlauCool BLHP-R-SPLIT Series and is the answer not in the manual?
Questions and answers