13. ENVIRONMENTAL CONCERNS..............29 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp • points must be loaded in the basket with their points down or placed in a horizontal position.
ENGLISH 2.4 Use cable. Should the mains cable need to be replaced, this must be carried out • Do not put flammable products or by our Authorised Service Centre. items that are wet with flammable • Connect the mains plug to the mains products in, near or on the appliance.
ENGLISH 3.1 Internal light The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. It Otherwise, it goes off automatically after comes on when you open the door or some time to save energy. switch the appliance on while the door is open.
Indicator Description Drying phase indicator. It is on when you select a programme with the dry‐ ing phase. It flashes when the drying phase operates. Refer to "Pro‐ gramme selection". Delay Start indicator. It is on when you set the delay start. Refer to "Daily use".
Page 9
ENGLISH The option prevents rapid changes in the dishwashing temperature of the selected programme and reduces it to 45 °C. 5.4 Programmes overview Programme Dishwasher Degree of soil Programme phases EXTRAS load Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery •...
Consumption values Water (l) Energy (kWh) Duration (min) 1) 2) Programme Quick 10.9 0.610 11.8 0.880 1h 30min 11.9 0.970 2h 40min 12.2 1.140 11.0 0.860 AUTO Sense 12.2 1.140 Machine Care 10.5 0.590 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values.
ENGLISH Settings Values Description Latest prog. selec‐ Enable or disable the automatic selection of tion OFF (default) the most recently used programme and op‐ tions. Display on floor ON (default) Activate or deactivate TimeBeam. Brightness From level 0 to level Adjust the brightness of the display.
6.2 The water softener The water softener should be adjusted according to the hardness of the water in The water softener removes minerals your area. Your local water authority can from the water supply, which would have advise you on the hardness of the water a negative effect on the washing results in your area.
Page 13
ENGLISH 6.3 Rinse aid level Water softener lev‐ Amount of water The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot rinse phase. It is possible to set the released quantity of rinse aid. When the rinse aid dispenser is empty, In case of the high water softener setting, the display shows the indicator...
The duration of the drying phase and the TimeBeam displays the following door opening time vary depending on the information on the floor below the selected programme and options. appliance door: • The programme duration when the When AirDry opens the door, the display programme begins.
ENGLISH 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start the programme Quick to remove any residuals from the manufacturing process. Do not use detergent and do not put dishes in the baskets. After starting the programme, the appliance recharges the resin in the 6.
4. Close the lid. Make sure that the lid Fill the rinse aid dispenser locks into position. when the indicator (A) is clear. 8. DAILY USE 1. Open the water tap. For information about the 2. Press and hold...
ENGLISH • The ECOMETER indicates the When the countdown is complete, the updated level of energy and water programme starts. consumption. 8.6 Opening the door while By default, options must be the appliance operates activated every time before you start a programme. Opening the door while a programme is If the latest programme running pauses the wash cycle.
• After 5 minutes if a programme was Make sure that there is not started. detergent in the detergent dispenser before you start a 8.10 End of the programme new programme. When the programme is complete, the 8.9 The Auto Off function display shows Dishes clean.
ENGLISH hardness. Refer to the instructions on • The correct quantity of detergent is the detergent packaging. used. • Always use the correct quantity of 9.5 Loading the baskets rinse aid. Insufficient dosage of rinse aid decreases the drying results. •...
10. CARE AND CLEANING 10.2 Internal cleaning WARNING! Before any maintenance • Clean the appliance interior with a soft other than running the damp cloth. programme Machine Care, • Do not use abrasive products, deactivate the appliance and abrasive cleaning pads, sharp tools, disconnect the mains plug strong chemicals, scourer or solvents.
Page 21
ENGLISH 5. Make sure that there are no residues of food or soil in or around the edge 1. Turn the filter (B) counterclockwise of the sump. and remove it. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides.
10.6 Cleaning the lower spray 10.7 Cleaning the upper spray arm We recommend to clean the lower spray We recommend to clean the upper spray arm regularly to prevent soil from arm regularly to prevent soil from clogging the holes.
Page 23
ENGLISH 2. Move the upper basket to the lowest level to reach the spray arm more easily. 3. To detach the spray arm (C) from the delivery tube (A), turn the mounting element (B) counterclockwise and pull the spray arm downwards. 4.
11. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code.
Page 25
ENGLISH Problem and alarm code Possible cause and solution Malfunction of the wash • Switch the appliance off and on. pump or the drain pump. The display shows i51 - i59 or i5A - i5F. The temperature of the wa‐ •...
Page 26
Problem and alarm code Possible cause and solution The appliance door opens • The AirDry function is activated. You can deactivate the during the wash cycle. function. Refer to "Basic settings". Rattling or knocking sounds • The tableware is not properly arranged in the baskets.
Page 27
ENGLISH Problem Possible cause and solution Poor drying results. • Tableware was left for too long inside the closed appli‐ ance. Activate the function AirDry to set the automatic opening of the door and to improve the drying perform‐ ance. •...
Problem Possible cause and solution Limescale deposits on the ta‐ • The level of salt is low, check the refill indicator. bleware, on the tub and on the • The cap of the salt container is loose. inside of the door.
ENGLISH other documents provided with this the rating plate of the appliance. Refer to appliance. the chapter "Product description". It is possible to find information related to For more detailed information about the the performance of the product in the EU energy label, visit EPREL database using the link https:// www.theenergylabel.eu.
Need help?
Do you have a question about the FSE73767P and is the answer not in the manual?
Questions and answers